Exaxtly!! Sunway outlet...

+ battery + charger i think 350++
M80 dont need buy battery and charger haha. But will chg to external battery mod soon. If M80 battery rosak then susah la.

Lucky I got few extra batteries and external charger. Going to buy the mod je.

morning everyone,
i borrow a Kayfun v4 clone from my friend yesterday.
The bottom air flow there keep on leaking after i refill the juice from top.
anyone know how to solve this issue?
the airflow there i should tighten it or loose it?
what is the function actually?

did he teach u on how to use the tank?

Senang la ada backup battery. But is every mod suits for every brand or type of battery?

So far all batteries I have works good. I have 2 VTC4, 2 Samsung 25r, 2 Efest and 2 AW's. Semua ok.

The diff is their output Amps. But as long as I dont go sub ohm, I dont mind the Amps

Hmm,did your friend told its gonna be leaking before selling it to you?

I don't own a Kayfun v4 but i think you have to close the juice flow control before re-filling . And open it up after you're done

Have you close the juice control before refilling?

Morning all vapers.

Top of the morning to ya!

For K4 clones, it's essential you don't overtighten any parts. To close the juice channel, if the drip tip is facing your left, turn the lowest part towards you until it stops. Then only you open the top juice cap. Then after you fill, reverse the action. To open the build deck, it's recommended to use a suitable size Allen key, insert it into one of the side air hole & gently open it. Again, don't overtighten.

About the bottom air hole, you gotta screw out the 510 connection pin & adjust accordingly the air hole pin. Each time you make a turn, give it a suck to determine the air flow that you prefer.

any tank better than subtank mini ?

When I started I used a kayfun v4 clone. After 2 weeks I changed to a Kanger. It was too much hassle to use.

You buy a K4 ori or a good clone for the flavour. Of coz if you're sucking on some low quality local juice, an old ego clearomizer would suffice.

Some people are intimidated by the number of parts on a K4 but in reality you don't need to disassemble all the parts. Once you initially got your setting right, the only ever parts you need to touch are the juice control, top cap & build deck. Unless if you wanna clean it, that's 2-3 additional parts to take off.

Try Billow V2... Just got it less than a day now, and it kicks ass! But it can be a little tricky if you're not familiar with dual coil setups...

Anybody experience the ego one.. My new atomizer head.. I put in the 2nd day, have burnt taste.. That mean my atomizer spoil already?? I wonder how can the atomizer spoil so fast.. I didnt chain vape it a lot.. This is my 2nd refill with liquid and the atomizer gone kaput and the burnt taste.

This post has been edited by spideysam: Jun 25 2015, 10:39 AM

this

also, the #16 o ring is known to be a problem and needs to be replaced

This post has been edited by rockettj: Jun 25 2015, 10:42 AM

Guys can recommend any good US juice? Sweet & creamy juice, with very minimal mint or no mint at all. Thinking getting one to test.

I smell the Unicorn Milk, the smells very gooding. Maybe have others to compare.