Acbel oso got a few models woh~ anywayz...there's prolly these few oni loh...Motherboard under volting oso got such thingy...ram timings bo syok..too loose oso can happen...a GeForce GX2 under ur hood oso can happen~ hehehe...slowly loh..these things are very...annoying..if u cant reach it..use clockgen loh~ 203mhz fsB? not bad waaaaat~ ^.^-b +3 mhz extra FSB..:P:P:P

sorry 2 interupt
jz a noob q
proc overclockability...izzit affected by proc temp?
cos my proc tested using sp2k4...cpu temp via smartfan is <45C but failed 1024k test...haizzz
even the n/b temp is much higher...around 47C

Acbel 450WATT=RM250 that wan is a true power i think.....
203mhz like very ALEIN ler.. hahaha

ALEIN or ALIEN?

Aiyo fren, don't worry about those little FSB differences laa...

As long as it didn't run to 180MHz, then that mean everything is okay laa...

Don't worry la...

oOps sory wrong spelling..

y u all so expensive 1?
i use 480watt true power from icute oni~
price around 135


This post has been edited by pong85: Nov 4 2006, 12:02 AM

haha!! ICUTE always like to MODIFIED sticker wan..
u don't know mer?
how is ur 2.8E the heatsink changed???

You actually trust icute PSU?

haha i used it.. coz it cheep.. hehe

huh
icute so lousy mer?
i duno wo..coz tat time change casing den said my old psu not enough support too mani fans...so i change lo...den they suggest tis to me..
aihzzzz

haha~ stick an x1900xtx in it and see =) you'll know what we're talking about..haha...

Wats ur 12v amperage? combined 12v amps that is...u can check the sticker on ur PSU...

huh?
dun get ur meanin

What he mean is, try plugging in an ATI X1900XT on you're pc, and you'll know why we say Icute PSU's are lousy...

*ot* I heartache cos I cannot use 1900xt cos gotta buy new PSU

Anyway somehow become PSU thread oredi... but still relevant to temps. cos its important to select a psu with good 120mm to take out heat from near the cpu.

Pong got a decent casing there, but your temps is definitely high. Even my p4 2.8 on a SFF with tiny fan generate 50C idle, best is you re-seat your HSF to be sure. (dont forget thermal paste)

lousy stok fan thats it or his thermal paste need new application IMO.his casing definitely got good airflow only his HSF is the major problem.

haha.. if i have money to buy x1900xtx then should be no problem fo me to buy better PSU la...

wahaha~ might not be the case....give u an example..google up PSU calculator and see how much total wattage u will need for a rig like this : -

Pentium 4 HT 3.2ghz (very mainstream, alot of ppl hv)
2gb DDR2 RAM
Ati x1900 (XT / XTX)
2 HDD
1 Floppy
2 Rom Drives
3 Fans (1-intake,1-exhaust,1 zalman)

u require around 380+ to 400+ total power...

You buy Coolermaster 450 Extreme Power....the amperage on the coolermaster is around 16-18 amps..(dun remember >.<) might not be enuff to power leh...u might experience auto restarts, GPU restarts of sometimes fail to boot.

Just giving an example oni

in single config >450 watt true power is enuff i think also if u have 1 hdd and 1 optical drive .CM extreme isnt true power hence not enuff juice

My advice:
Go for Enermax Liberty PSU series...

hehe same here men..but it is kind of expensive ...

if got budget just go for those Tagan PSU selling at ATE now...

So luring and looks even better than Liberty.. of course price is killing as well.