ya..ya..bored oledi asyik makan kuih raye jer..

ok now, i've tested the big typhoon oledi..with some AS5..
my PD 820 running at stock speed , 2.8GHz..
using 2 instance of prime95, 1st instance running on 1st core and 2nd instance running on the 2nd core..
temps reading by Lavalys Everest Ultimate Edition 3.5

stock cooler
idle: 38-40C
load: 55-57C

big typhoon
idle: 34-36C
load: 50-52C

i didn't OC yet.. not now, at least cuz i'm quite busy nowadays..
hopefully can get better temps in next few days as the AS5 "settled down" a bit..
or maybe i should re-apply some AS5 back.. argh..headache arr.. my casing is too packed..




This post has been edited by coolmast3r: Nov 3 2006, 11:35 PM

i re-applied some AS5 this morning and guess what..
idle temp increased to 35-37C..

edit:

just finished priming with condition same as my previous post..
ah, forgot to mention that i set the fan speed on the big typhoon to 1500rpm (using my cm aerogate II, of course)..that goes the same for previous test..
idle : 35-37C
load: 51-53C

it seems like after re-applying the AS5, my temp increased 1C.

no OC test yet, though..


This post has been edited by coolmast3r: Nov 4 2006, 10:26 AM

AS5 needs a couple of days to set (2-3). I noticed my temps dropped a lil bit after its set....

BTW what is the FSB and memory speed which your running at?

fsb? 800 lar.stock fsb.. i mean 200 qdr..

for memory, im using ddr2 667..

edit: im not going to OC my cpu until..maybe next month i think..

This post has been edited by coolmast3r: Nov 4 2006, 03:17 PM

lol...can tahan until next month eh..lol..i overclocked mine within 30mins of getting it home...

finally thought out the whole system of mine..
might be a problem with the northbridge
based on this article

http://www.bcchardware.com/index.php?optio...=1&limitstart=1

i identify with his temperature

my taking of the temp
also using laser temp
is ~ 73 C
using NXsensor ~93 C!!!

so anyone knows where i can get the zalman NB Heatsink in Penang?

they are selling some pretty niffy north bridge heatsink in the bulk section..check it out...

LOL
Cannot tahan oledi ..
Here's my little OC test result..

Core speed 3111.7 MHz
Start priming 0154 AM

Idle temp 37-39 C
Load temp 55-57 C

Priming ended 0658 AM
Stable, 0 error 0 warning

Will OC more after final exam..maybe later tonight.

ayak u shud be able to go at least 3.4Ghz

ur proc should be able to clock much higher than just 3.1ghz....increase ur fsb..go for it... heh heh

Here's my latest OC:

Core speed 3336.7 MHz
Start priming 2238 Hrs

Idle temp 38-40 C
Load temp 50-52 C

Priming ended 2300 Hrs
Stable, 0 error 0 warning

That' s it for now. I think my southbridge oledi burnt. Cuz suddenly can't use all USB ports and integrated sound is not working either.

Now I'm using a 4-port, pci-to-USB card and a USB soundcard..

Maybe i OC too much before, pumping excessive volts to the mobo.
FSB reached 953 MHz.
PD 805 user (x14 multipier) shoud get around 3.8GHz oledi but me with PD 820 (x14 multiplier) only can get 3.34GHz..

did u set fix pcie n pci frequency?
100/33 or 101/33

no. i didn't touch the pci-e and pci freq.
only fsb and ram, but ram not much..

just wondering is it fix by default?

Threadstarter, you're lucky enough that you are able to use you're Pentium D 930 pc now...

Why?
Because since the day i've bought my Pentium D 930 + ASUS P5WD2-E Premium [975X Chipset] [Bought from "Linkeong"], there's always a problem of heat...
[I'm using Thermalright XP120 with Vantec UV 120MM Led Fan + Arctic Silver 5]

In stock speed, the temperature for the processor was 91Degrees!!!
And the northbridge in 15degrees...

I know there's something wrong with that motherboard, the temperature sensor chip is faulty...

There i go, to CYCOM, send the motherboard for warranty claims...

I know you guys are going to say "Why didn't u complaint to Linkeong?"

It's useless, he's in IPOH, and it's going to take some time to ask him to claim warranty from CYCOM...

So there i go claim the warranty by myself...

And now, it's already a month after sending the board for RMA...
Every friday, i keep calling CYCOM RMA Center asking about my board, and what they've told me that it's going to take another 2 - 3 week before my board is ready...

Bro, hows ur southbridge now? did you pump up the fsb voltage?

You can try to lock the pci freq and downclock ur memory and pray for higher fsb

Oh sorry to hear about your pain shawnty....i was also bidding to buy the 930 proc off linkeong last time..... hope you get your mobo back from rma soon

Cycom told me that they need at least 2 - 3 weeks more until the board is ready...

ya
i know what you mean
my condition pulak is default
diode: 17~19 degree idle and ~24 load

if change with speedfan, to
thermistor: ~73 degree!!!

but i dont have complaint cos got the chip 1/2 price from relative

Three thing I got from modernopc
(btw thanx modernopc)
you can get these and more here >> http://forum.lowyat.net/index.php?showtopic=177141

They are

ZALMAN VF700-LED-ALCU Copper/Aluminum VGA Cooler



ZALMAN ZM-STG1 SUPER THERMAL GREASE



ZM-NBF47J Zalman northbridge chipset heatsink


My own picture will up load afterwards
cause I just got the stuff yesterday night

As for now, all i have assemble is the VF700-LED-AlCu cooler
on my XFX 7600GT
and boy what can I say
Using only the supplied,(not the STG1) the temperature decreased
from the idle : 52 degree (ambient ~22, rainy night, non aircon)
to idle : 43 degree(ambient ~22, rainy night, non aircon)

and load : ~72 degree
to load : ~60 degree
that is around ~10 degree reduction
and this is with the use of thermal paste supplied along with the HSF.

Overclocking wise
I have able to OC core only,
(tested stable with 3DMark2006)
on stock fan : max - 627mhz
VF700 HSF : max - 650mhz

my ram w/o ramsinks are able to clocked @ 897mhz
but with this new array, I havent OC yet cause no time.

(disclaimer - all 3dMark2006 test are done with the check for hanging mid-benchmarking and in mid-NFS:MW, artifacting was not check cause I don't know how to check )

Okay when I finish the northbridge HS operation
let see how much higher i can get with my Pentium D 930
As for now, it stand at 3.6ghz (bootable, playable)
and my NB temp is ~73 degree

If according to this article
>> http://www.bcchardware.com/index.php?option=content&task=view&id=2663&Itemid=40&limit=1&limitstart=1
the reduction is ~26 degree, from 89 to 63 !!!
let see how mine will go

This post has been edited by mcchin: Nov 16 2006, 01:16 PM