ko imagine aku yg gaji kecik ni...lagi la benci kuasa dua.

Yinson secures financing for OCTP floater conversion

By Ruth Chen
13 March 2015 03:38 GMT

Malaysia's Yinson Holdings has secured a term loan facility of up to $780 million to partially finance the conversion and refurbishment of the floating production, storage and offloading vessel for Eni’s Offshore Cape Three Points (OCTP) project in Ghana.

http://www.upstreamonline.com/live/1394322...ater-conversion

Start Your Career at NOV. Based in Kuala Lumpur, the Service Manager will develop and manage the provision of aftermarket services to our customers in the Asia Pacific. The Service Manager will also manage the service team functions to ensure business objectives are achieved and improved upon. For more information on this job, please contact UKCareers@nov.com

Currently lining-up the marine crew of our new built DP2 workboat.
Below is the list of positions that we are currently looking for:-

Master
Chief Officer
2nd Officer
Requirement: with trade certs of 3000GT or more Unlimited Trade Voyages

Chief Engineer
2nd Engineer
3rd Engineer
Requirement: with trade certs of 3000kW or more unlimited trade voyages

Electrical Engineer
Oiler
Bosun
AB Seaman

For job queries and application, kindly email to jerry.gani[at]sapurakencana.com

Hide

Jason Loke
IMMEDIATE OPENINGS for technicians with experience in Video Inspection/Boroscope for process piping for a short term contract for onshore work in a shipyard in Singapore. Rates differ based on experience. Send your resume to me at jason.loke@ spencer-ogden.com.

Mammoet Installs Malampaya Phase 3 DCP off Palawan Island for Shell

by Mammoet

Press Release

Thursday, March 12, 2015

Mammoet, a construction services company, reported Wednesday that the company recently installed the Malampaya Phase 3 Depletion Compression Platform off Palawan Island in the West Philippine Sea for its client Shell Philippines Exploration b.v.

The Malampaya Depletion Compression Platform (DCP) is a brand new type of "self-installing platform": the platform floats into place over its end-location after which the legs are lowered onto the prepared seabed. It uses a pre-installed jacking system to enable the 262 foot (80 meter) legs to be jacked down and lift the platform from the water to its final position. This technology avoids the need for the large specialized vessels that are normally required for an offshore platform installation.

Mammoet was contracted for the offshore operation to lower the DCP legs and lift the platform to its final height. The DCP’s end-location is next to the Malampaya Shallow Water Production Platform (SWP) to which it will be linked by a permanent bridge, also to be installed by Mammoet.

The Malampaya Project located off the coast of Northwest Palawan, the Philippines, is a Shell-operated initiative on behalf of its joint venture partners and the Philippine government. The gas-to-power project is aiming to sustain to supply 30 percent of the country’s energy requirement.

Now in Phase 3, the new platform will help sustain the extraction of natural gas from the Palawan basin and process it in a shallow water production platform before transporting the gas along a 313.1-mile (504-kilometer) underwater pipeline towards the onshore gas plant and eventually to its power plant customers.

Mammoet was involved in the DCP’s construction, assisting with lifting and lowering the platform during the fabrication process. During the platform’s construction, the strand jacks were also installed to prepare for the jack down of the DCP’s legs and to raise the platform into place.

Keeping a gas platform stable out at sea, while installing the platform’s legs on the seabed and being buffeted by waves, is a delicate process. Out at sea, waves hit the floating platform creating movement. To keep the platform level, some of the strand jacks need to make upward movements, while others make downwards movements at the same time. In other words, different strand jacks must be active simultaneously in opposite directions to buffer the upwards and downwards movement of the DCP before the legs are positioned and the platform is raised out of the water.

To facilitate this precise calibration, part of the strand jack installation included special "guying valves" and a new computer system to create a constant tension to deal with the movement of the platform on the water.

The platform is now being held in its raised position, with its 262 foot (80 meter) legs secured on the seabed, awaiting the completion of the operation to weld it in place and install the connecting link-bridge.

Mammoet’s experience in installing and raising offshore platforms ensured the project was executed swiftly and safely within 48 hours. Use of the "self-installing platform" avoided the need for specialized barges that would have been necessary for the more conventional float-over platform installation method. This saved Shell valuable time and resources.

- See more at: http://www.rigzone.com/news/oil_gas/a/1376...h.pW3tSnGY.dpuf

Shazli Razak
Managing Director at Kemuncak Lanai Sdn Bhd

(MALAYSIA ONLY) Looking for HR cum Recruitment Executive with minimum 2 years experience in recruitment to be based in KL. Interested candidate pls email CV to shazli.r@kemuncaklanai.com

KASK Careers Dear All, WE'RE HIRING: RECEPTIONIST (2 Year Contract with an option for 1 year extension) Location: KLCC, Kuala Lumpur Nature of Business: Investment Company. Requirements: * Min Diploma in a related field * Fluent written and spoken English [is a must] and B.Malaysia * Excellent Telephone Skills and Verbal Communication * Knowledge of Microsoft Office * Good Listening, Organization, Informing Others and Phone Skills * Professional Conduct and Customer Focus * Malaysian Citizen To apply, kindly send your latest CV to recruit@kask.com.my If you know of anyone who might be suitable for the above positions please forward this advertisement to them

asik experienced punya hire je. cer tepek sket untuk fresh grad punya ke. nak tarik member2 masuk oil n gas ni

Shane McGowan
Lead Consultant at Air Energi

Completions Director and a Technical Sales Completions Manager to be based in APAC - if keen please forward me your resume on smcgowan@airenergi.com

Can steam engineer work in offshore?

-

This post has been edited by lancer193: Mar 14 2015, 07:10 AM

To be honest, with the weak market currently, tiada tempat yang banyak untuk fresh grad. Cukurlah dengan apa yang ada walaupun masuk vendor and subcon kecil sahaja berkaitan O&G.

I always emphasize this advice to fresh grad out there - cari lubang untuk masuk project berkaitan O&G walaupun melalui subcon. You have to built your foundation first.

Inilah nasihat dari saya yang mentah dan hina ini.

Boleh.

First of all - aku nak mintak maaf for those yang PM me nak mintak nasihat. I had enough - I wont spoonfed for easy access for you. Aku hanya boleh tunjuk jalan, and nak bagi a critical thinking advice sikit. Maaf jika bahasa aku kasar, dah memang style aku. Aku dah terbiasa bambu subcon aku, I have no mercy for those who are slacking in my project.

Hi guys,

I have been a silent reader for months now, have read all the threads and just wanna thank you guys for sharing valuable tips and advice.

I have a question here. If I want to do computational fluid dynamics, is there a place for that in O&G specifically upstream? Maybe mud engineer, or drilling fluids? Your response is appreciated. Thanks!

Maintenance Superintendent
10+ Years
MYR35,000 - MYR40,000/month

Senior Reliability Engineer
8+ Years
Negotiable

Senior Facilities Engineer
10+ Year
MYR20,000 - MYR30,000/month

Business Development Manager
5+ Years
MYR20,000 - MYR30,000/month

Project Controls Manager
15+ Years
MYR25,000/month

Project Managers
15+ Year - O&G
7+ Years - Installation & Transportation
MYR20,000/month


Attached File(s)
 Engineering_Jobs_in_Malaysia.pdf ( 129.68k ) Number of downloads: 70

Aku pun cukur dapat tempat join vendor and subcon ikan bilis. kesian tgok kawan2 tak dapat tempat lagi.

cukur la.

T&I PM earn more than 20k per month. Easily 40k-65k per month for PM on contractor side, 80k-100k PM on client side (both on contract basis, depending on experience and project experience list for T&I).

Hi, anyone has heard of Exact Automation Sdn Bhd ? Know of their work environment, culture, benefits and salary ? Is a stable company ?