That is the carry pit. Lol.
I honestly thought they copied Kyosho, apparently, according to Teoh, Taiwan already made this model quite a while ago and I was like whutttttt

if possible , it would be better if you could go over to Singapore there and get , but with the excahnge rate now , maybe not so good idea

Or just contact Junaidy.

hmm... i intend to use it to keep tools, paints etc...

know anywhere to get one?

hahaha.... this one too hardcore for me already...

krik krik..
cik ati.

smalam ko nye BFF dapat TQ kat mijion

This post has been edited by iOnine: Jun 15 2015, 08:57 AM

For hobby tools your Tool Box in Hardware shop would be better.

This one is more for keeping cars & small parts as that is how the upper deck is designed for.

Hi Guys,

It's me again with a question. I hope you're still active even though I read a lot of closing shops on this thread.

How do you reinforce the front of Super FM? Speedtech racers here restricts drilling holes on chassis. So the Youtube video I saw is not applicable where in you drill a hole and screw the FRP I mentioned to them that Super FM should be at least allowed just to reinforce as we all know it easily breaks. Isn't it justifiable? And then they overprice and hoard Carbon FM from $5.00 to $15.00. *pissed* Even 2nd hand Carbon FM's are around $15.00.

I wish you have a video of your car jumping on the ramp. Same here, my car tumbles like on the video on my first try on the ramp. In the end, we all made our cars slower to prevent it to go off track.

This post has been edited by Cim~: Jun 17 2015, 11:22 PM

take the frp and cut it to shape , or soak some cotton wool in superglue and put it in the front (rule dependent ) or use putty and reinforce the fron area .

as le above.
depending of rules as well.
i wonder why u guys dont allow to drill hole ;(
overall, its still tamiya and the japaneze loves to drill and cut and paste alot!
meaning ur rules is much more superior than the japs -.-'

Hi.. I'm nubis here.. Nak tanya klau funrace kat TU, screw n nuts (including lock nuts) pun kene pakai ori jugak ke? Mohon pencerahan fair n lovely.. TQ

screw and locknut telah di waived.
tapi yang lain kena ori.

Orait.. Thanks bro..

dunno , my own sfm , been using the same method for a long time now which involves drilling 2 holes in the front there ... maybe the TU rules is different gua

Any videos or pix about it? I heard about cotton and super glue. You mean you put cotton underneath the FRP plate and inside the front bumper?

What about the FRP and cut to shape?


All I can think of is unjust marketting. Unjust because u tend to buy FM chassis but CFM are hoarded and overpriced. Local speedtech racers here said that they are following the "Manila rules" which they also follow Japan Rules. Japan Rules with extra restrictions. I just also heard that Super XX EVO parts are banned for race here O.o

the cotton one is put inside the front bumper ..cutting the frp also possible , but is a bit longer

mana ada TU sini.
hes talking bout pinoy rules.
their rules is diff than us.
even their qualification and tandem oso diff oh.

BFF saya ZAF hobby je. wakakakakakaka

tutup sebelah mata je. tapi kalau immi ketara macam tayar hijau, roller shuriken fakd up ninja warna merepek merepek, rim alloy (Vossen & TE), memang kau mintak nak kena DQ la.
setakat screw, locknut, wheel shaft, batang aiskrim masih boleh dipertimbangkan

TU actually tengok siapa inspect.

kalau Amin (or aku) relax je.
tapi kalau Yaya ke, Redza ke, nasib nasib kau la. hahaha

bukan ZARFT ngan Kemal ke. hahahahahaah

Yaya ngan Redza tgk org.
hahahahahaha. ko relax ke? tipu la

28hb ni kan game semi sepid?