how much smilodon right now..next sem my target was Sirius Black..love he design very much...some more i harry potter freak...Sirius black one of my fav char...this sirius black got at LYP??just saw at garge sale from niclaetosh...

Sirius LYP got sell...at All IT got one..then..at Cycom i think got one also...i got similodon for 320 only ! Happy...LOL

who wan 2 buy my raidmax titan 901? come2 http://forum.lowyat.net/index.php?showtopic=523934

anybody know where i can get rx-9gt in sg or in lowyat area????

I juz get a ninja for RM290.... how's the price?? izzit become expensive??
i bought at melacca bukit beruang....

erm bro where is PAS located?

wats happening to this raidmax league! guys is there anywhere selling the sagitta 2 and how much is it? and NINJA doesnt come with front USB panels and audie ports right?

Ninja got la...

located on the bottom part of the front panel --> got plastic door covering it

my black ninja


now im thinking of raidmax titan, samurai or smilodon..
can you guys suggest me the best?

oh means i have to open the door when i wanna use the usb? haha. i went to the sites they didnt state that the ninja has the front usb ports

---

Added on November 13, 2007, 9:35 pmand redjol, means ure selling ur ninja? why are u changing? haha

This post has been edited by SpongeY: Nov 13 2007, 09:35 PM

i just want a bigger chassing.. its' hard to modyour rig if the chassing is too small..maybe samurai or titan or smilodon can help...
im not selling my ninja..it was for my 2nd rig..

ahh i see. anyway, is there ANYWHERE IN MALAYSIA SELLING THE SAGITTA-2??? i only can find SAGITTA no SAGITTA2 =(

1 thing i wanna ask... is ur side panel fan noisy??
my 8am side panel freaking noisy lerr... the sound so annoying,
like a vacuum cleaner

i just come across this thread.
i am using a smilodon casing. bought it in penang PC depot for 299.
will try to write up a short review if there are interest and i have some time.

Greeting to Raidmax clan!, just bought a raidmax casing and very much fallen completely in love with it..

here some pics of me Smilodon



when the light goes out...



a simple review on the casing

pro
excellence fans package included! 4x 80mm + 1x 120mm
movable mobo tray!! it help A LOT for me SLi setup
its blue everywhere

con
tight fitting of the "dirk tooth"
the side panels are both removeable BUT to put it back, the hinges are quite a pain in the **** to put back

you mean the bottom hinges?
i think with practice you'll get the hang of it.
a few tips from my experience
when putting the panel back, don't try to immediately slot in the hinges (3 of them)
try to use the right edge of the panel (for the transparent panel side) and align it with the gap on the casing where th eplastic front panel connects witht he casing.
then slide it in to align the hinges. it will be easier this way.
also try to angle the panel when inserting the hinges. approx 20 degrees aggle to the casing (almost in closed position liao)
i find that the hinges are very hard to slot in when the panel is placed flat on the ground

hope it helps

thanks!! im so gonna try to this..!
imagine everything on the mobo allready fixed in and i tried to put in the hinges.. it was a nightmare!

ok got some time tonight, so i took some photos of my casing and the points that i like/dislike

likes (Most are already listed in the raidmax webbie, so i'll list the ones that i personally like and not listed):
1. removeable side panel. in fact even the platform where the mobo sits on can also be removed, but i don't see much point in removing that platform since the panel is removeable
2. fan fans and fans. not just the quantity, but they are very strategically placed. for example, the side panel (transparent side) the intake fan is directly on top of the processor HS which means that it draws fresh air directly to your processor HS. there is an exhause fan which is below the intake fan and it is positioned directly in front of the cards slots which pulls out all the heat generated by the GC/other cards.
3. The casing comes with a bar ad the side panel. the exhause fan is attached to it. but what is interesting is that the plastic cage where the fan is house has adjustable 'fingers' that can be ised to 'hold' up the cards. I think it's an overdesign but i am using a light graphic card. probably it will helo to add additional support for heavier cards.
4. Removeable hdd cagethe hdd cage can be swivelled out to ease hdd installation and can even be taken out. and i think the quick release hdd mounting mechanism is probably the easiest to remove design i have come across.
5. Because of the removeable sidepanel, i can easily hide the 24pin power, ide, and other misc cables behind the drive bays.
6. of yeah the tool box

dislikes (some are mere muinsense but some coule be dealbreaker, but it all depend on individual taste):
1. Because of the removeable side paned, one have to be careful when opening the panel. with the mobo installed and the 8pin atx power attached, you could easily do some damage if you open the paned without remembering to remove the atx power cable. the cable might not be long enough and will tug on your mobo.
2. weak door magnet. the front panel door is held by 2 small and weak magnet which makes the door feels like it is not shut securely. But i have a fix to that
3. placement of front usb and audio jacks. the jacks are placed at the bottom of the front panel. this means that you will need to have the door opened in order to use the jacks. placement at the bottom also makes you waste extra length of yout cables esp headphone cable.
4. due to the door design, even though you have a 120mm front intake fan, the front door essentially blocked most of the surface area tha that makes it less efficient
5. due to the placement of the hdd cage at the lower front of the casing it essentially created a 'tunnel' of sorts to the intake from the 120mm intake fan and this gives only a small path for the fresh air to be circulated aroung the mobo area.
6. heavy, but i sort of fix that problem
7. dark power on button. the texture of the button is very similar to the front panel, and this makes it hard to look for the button in the dark. not really a problem, but would be nice if it is more distinguishable.
8. the metal plates for the card slots are 'permanent'. dunno how to put it. but it's something like this. as stock the covers are attached to the casing, and if you need to remove them, the removal is permanent, means you sort of 'tear' it off the casing (refer to last photo). another thing is even though raidmax mentioned that this is a toolless casing the cards still need to be screwed in the traditional way.

Fixes, actually i wouldn't wanna call it fixes, but more to improvements. i did 2 so far and they are.
1. I got myseld some magnet strips. it looks like rubber strips but are magnetized. put double sided tape on one side and stick it onto the front panel wherer the door closes. this solved the stock weak magnets issue.
2. i swapped the bottom support pads with castor wheels. I got some mini castor wheels and some plastic washers (to increase the load beating area of the wheels). the remove the pans and put on the wheels.

photos.
1. magnetic strip for the door
2. castor wheels
3. side panel (left side) opened, the lue box at the tip of the black bar is the exhaust fan casing
4. side panel (mobo side) opened. notice that there are spaces behind the drive bays where you can hide your wires.
5. the sucky card panels



oh ya, sorry for the long winded post.

This post has been edited by webster: Nov 21 2007, 09:30 PM


Attached thumbnail(s)

i took a short video of my method of closing the side panel.


hope it helps.


gosh... my voice sounds so freaky ...


Attached File(s)
 100_1424.MOV ( 7.34mb ) Number of downloads: 42

how big is the fan on the sidepanel of raidmax ninja casing ?