Welcome Guest ( Log In | Register )

6 Pages < 1 2 3 4 5 > » Bottom

Outline · [ Standard ] · Linear+

 LYN Almera Owner Discussion V3, Come Share Your Experience

views
     
Thrust
post Oct 27 2020, 12:19 PM

Power To The People!!!
*******
Senior Member
3,760 posts

Joined: Oct 2005


QUOTE(weicuenbb @ Oct 27 2020, 09:48 AM)
Hey guys, for my car service at 5,000 km, should I start calculating the mileage from the day I had my 1,000 km service done. Or just send to service when my total mileage hit 5k?
Apparently the sticker on my car says 5k but the app says otherwise... (6k)
*
You start counting at 5,000km or 6 months whichever comes first after you've serviced the car.

There after, it will be every 10,000km or 6 months whichever comes first.

user posted image
Thrust
post Nov 19 2020, 03:05 PM

Power To The People!!!
*******
Senior Member
3,760 posts

Joined: Oct 2005


QUOTE(Jessieccy @ Nov 19 2020, 02:49 PM)
Oh, cause i got KYB from online. The shocks on the front right dies on me on the 6th month, no warranty. Up the bumps, fully depress, "Kha-thunk". Cause no one can confirm the cause... so i drag till 10mth and just let my Workshop NCS garage buy and fix it for me (RM350 one pair front only, RM80 labor). he say got 6mth warranty.  so yeah. back to KYB, if you have the same symptom, I tell you how to diagnose... if your car lifted up, shock fully extend and no load, suddenly it goes away for like a week or so... 100% confirm is the shocks.
After got the Proride in June, oh surprise surprise... August it goes "dup dup dup" on the left on uneaven roads. hahaha. well at  least that came out early so got free replacement but need to pay labor. My alignment never got back "solid" when i changed to KYB... finally just last week Kenzone Auto (i only went there for free stuff, end up paying for the camber nut LOL) they suggested I add camber nut. Which solve my problem. Now feels more planted, no more "lorry air push/sway" anymore.
*
The KYB when new is very stiff. After longer usage, it will get softer. I installed KYB in October 2018 and found it to be stiff. Now after 2 years, it got softer and ride quality improves a bit though still not as good as original shocks.
Thrust
post Dec 2 2020, 07:02 PM

Power To The People!!!
*******
Senior Member
3,760 posts

Joined: Oct 2005


QUOTE(ascariz @ Dec 2 2020, 06:03 PM)
i feel like wanna explode today. my foreman ask to send today morning, instead of yesterday, i follow. 12.45 i go check, still dont start changing anything. i need to go back home take another car cause have appointment for my son. but what really wanna make me explode is, i changed all engine mount, still the vibration the same, or littleeeeee bit less than before. changed zenwa. lower arm change, nissan japan. absorber all 4, kayaba. all absorber mount. absorber link 555. ignition coil and plug changed too. but, still i can feel vibration up until my chair and my door arm rest. my leg feel stronger vibration. im about to give up. lol help! what else.. i change brake caliper pin too since i want to try remove klak2 sound when driving slow, as suggested in FNA.
edit. forgot to mention. my timing is solid. 700 rpm, static. not fluctuate or anything.
*
Sometimes, 3rd party engine mounting are hard and it may not absorb the engine vibrations well.

I've replaced with DENCO engine mounting and it works great. Totally no vibration.

Did you see your mechanic changed all these parts?

This post has been edited by Thrust: Dec 2 2020, 07:04 PM
Thrust
post Dec 2 2020, 10:20 PM

Power To The People!!!
*******
Senior Member
3,760 posts

Joined: Oct 2005


QUOTE(ascariz @ Dec 2 2020, 10:06 PM)
already contact another workshop. explained the problems. show him the errors picture. he told me to bring the car. seem he confident. last option before go to TC.. afraid TC gonna rip me off. lol
*
Confirm Tan Chong will skin you off alive!!

Do update us once you've solve the problem.

This post has been edited by Thrust: Dec 3 2020, 07:36 AM
Thrust
post Dec 4 2020, 04:35 PM

Power To The People!!!
*******
Senior Member
3,760 posts

Joined: Oct 2005


QUOTE(ascariz @ Dec 2 2020, 10:06 PM)
already contact another workshop. explained the problems. show him the errors picture. he told me to bring the car. seem he confident. last option before go to TC.. afraid TC gonna rip me off. lol
*
Any updates?
Thrust
post Dec 5 2020, 11:04 PM

Power To The People!!!
*******
Senior Member
3,760 posts

Joined: Oct 2005


QUOTE(ascariz @ Dec 5 2020, 10:32 PM)
sory for late reply. i go to other workshop, he bring bigger screen scanner, 4x scan, NO ERROR. lol. phewww... if still got error, i will feel frustrated since i took care that gearbox with all my heart. lol.
for the vibration, i changed my 3 days ZW mount to nissan thailand. then im 200% satisfied. i can  hear my engine piston again during idle & AC off. lol
*
Means the culprit is the Zenwa mounting..
Thrust
post Dec 10 2020, 07:25 AM

Power To The People!!!
*******
Senior Member
3,760 posts

Joined: Oct 2005


QUOTE(Jessieccy @ Dec 9 2020, 05:11 PM)
Yes no doubt about the acceleration. The old one, when new... It had this silence when start up and low dashboard, high headroom that other competition doesn't have. You'll be surprised at the silence when the car is warmed up. You don't even know if the engine was on. Highway cruise is quite comfortable at 120-130kmh. I'm quite sure the NVH in the new one has much improved
*
Do you plan to upgrade to the new Almera?
Thrust
post Dec 13 2020, 07:07 AM

Power To The People!!!
*******
Senior Member
3,760 posts

Joined: Oct 2005


QUOTE(xiaobaiwm @ Dec 13 2020, 12:24 AM)
Yes I agreed! I using denco and very satisfy! But I can still feel some vibration at the door butof cuz it's alot reduced. Well, our car are not V6 engine, so a little vibration is normal
*
You must be very meticulous in feeling the condition of your car biggrin.gif

I was told DENCO is a subsidiary of Tan Chong where they make spare parts for Nissan. So I would assume the standard is there but it may not be as good as Nissan original.

Nissan original also have those made in Thailand and Japan and the price varies a lot.

Since Denco is around 40% cheaper than Nissan parts, better to go for Denco.
Thrust
post Dec 16 2020, 06:33 PM

Power To The People!!!
*******
Senior Member
3,760 posts

Joined: Oct 2005


QUOTE(ascariz @ Dec 16 2020, 06:28 PM)
user posted image

is this consider VERY DIRTY?
*
Dirty is one thing, I just worry the black stain indicates that your cooling coil 'bocor' already.
Thrust
post Dec 16 2020, 06:42 PM

Power To The People!!!
*******
Senior Member
3,760 posts

Joined: Oct 2005


QUOTE(ascariz @ Dec 16 2020, 06:39 PM)
r u sure? or just oil stained? cause i just service my ac on 17/10/2020
*
Not too sure.. Normally if cooling coil bocor, you will smell some chemical odour when you turn on the aircond for a while.

If you don't smell it, most likely it's still ok.
Thrust
post Dec 16 2020, 07:12 PM

Power To The People!!!
*******
Senior Member
3,760 posts

Joined: Oct 2005


QUOTE(ascariz @ Dec 16 2020, 06:46 PM)
last time my cooling coil leak, i did smell something, i hear hissing sound.. so far my ac cold as ice (at night rrr).. hope all is well.. looking for cabin filter. seems like nothing special online. better buy at local shop. almost same price. RM20. or got any recommendation for cabin filter?
*
I always use those cheap cabin filter bought from local spare parts shop. Around RM20.. Use 1 - 2 years then change lo.
Thrust
post Dec 17 2020, 08:12 AM

Power To The People!!!
*******
Senior Member
3,760 posts

Joined: Oct 2005


QUOTE(ascariz @ Dec 16 2020, 08:43 PM)
ok. hear my plan.
Disclaimer: im not racing man, i drive follow rules, at highway 110 KM/h max. i love my current condition car. same as new, i mean, slow as original it should be.
I dont push my car when climbing hill, or when the traffic light is green, i just drive normally, what it can.
But i want a little pickup / torque when overtake, when traffic light is green, and when climbing hill. damn car behind me keep cucuk2. they think i dont have 4th gear ha? lol

So, im thinking some modification. Turbo out of question. dont want to touch  engine, retune etc. still cant trust malaysian tuner.. maybe got good one, but, nahhh...

1) air intake. youtube (MCM especially), forum, say, change air filter performance type / open pod, may or may not improve it. but my air filter clip got problem already. broken. i use 3M double side to keep it intact. im so lazy to go halfcut shop to find it. not selling anywhere online or sparepart shop.  so chaning it entirely, i dont mind. but, as i searching around, seems like open pod / K&N type, not really safe. it's direct to throttle body, not secure as original filter setup. if water splash, worried it go through it.. what u say?

2) exhaust. if im going full for extractor 4-2-1 setup, ask already, local no stock. online got, but, without wrap it with heat shield, it not safe to O2 sensor. can melt it. and my local shop suggest to change tabung tengah exhaust / muffler that he claim can improve pickup. should i take it?

3) Pressure jet hose c4? forum FNA post it. im not sure, seems like he just add 1 tiny samco tubing. i ask 2x for clear picture, he don't show it. it's not i want to duplicate it, i want to know, is there any special feature to his hose, like some adapter that can change the flow from spray to pressure type (i guess it air flow since he connect it around throttle body). what do u think?
*
If you want slightly more power and pickup, remapping your ECU is the way to go but you need to find a mechanic that knows how to do it for Almera. Another way is to install those throttle control which will increase the pedal response thus making you feel the car is more power (but actually it's the same).

I know Honda City can remap and it cost around RM350 to do so without modding anything.
Thrust
post Dec 17 2020, 02:43 PM

Power To The People!!!
*******
Senior Member
3,760 posts

Joined: Oct 2005


QUOTE(ascariz @ Dec 17 2020, 01:07 PM)
yeah. my mechanic also say remap (i tell my plan, not even 1 of it he suggest, he just ignore it. lol). He said kedai Alor gajah, but not say which shop. lol. need to google around.
made my mind actually. after some research, all that changing intake, exhaust, seem not effective. better i go straight to remap..
*
My suggestion is to go with throttle controller lor.

Keep everything stock but just make the pedal being more responsive which will eliminate the feeling of being sluggish.

Replacing the exhaust is the last thing I will do because the original catcon is expensive and there's no guarantee what the new exhaust will perform. Louder, more distortion, fuel guzzling, smellier because no more catcon... Many things to consider.
Thrust
post Dec 17 2020, 07:36 PM

Power To The People!!!
*******
Senior Member
3,760 posts

Joined: Oct 2005


QUOTE(ascariz @ Dec 17 2020, 07:22 PM)
you done it? have review or brand recommended?
*
Nolor.. I drive like uncle only and I am not seeking for power. I focus more on reliability and fuel saving.




Thrust
post Dec 18 2020, 07:37 AM

Power To The People!!!
*******
Senior Member
3,760 posts

Joined: Oct 2005


QUOTE(carnby77 @ Dec 18 2020, 12:46 AM)
hello everyone/anyone,

I just changed my fan belt (bando) and tensioner 2 months ago. Suddenly today morning got squek squek sound (tikus sound), any idea from your experience what could be the issue? My car mileage is 179k.
*
Bearing from some of the pulley is faulty. (alternator bearing, tensioner pulley bearing etc).

Time to replace the faulty bearing.
Thrust
post Dec 18 2020, 02:50 PM

Power To The People!!!
*******
Senior Member
3,760 posts

Joined: Oct 2005


QUOTE(Jessieccy @ Dec 18 2020, 02:41 PM)
🤣🤣 Testing is free. Vtec is a scam! Turbo better. Haha joking only.
Let's see if Kicks e-power will come in, electric engine is the Future. If not... Maybe I'm stuck with this car until N18 becomes cheap enough. Lol.
*
What is the current mileage of your Almera?
Thrust
post Dec 24 2020, 08:56 AM

Power To The People!!!
*******
Senior Member
3,760 posts

Joined: Oct 2005


QUOTE(xiaobaiwm @ Dec 23 2020, 10:36 PM)
Damn this Nissan 5w30 oil. Just run 4k and 5 months already black like hack. Performance also getting bad during cold start.
Last time nissan 0w20 also same.

Really suspect nissan oil quality.

Oil 4k, 5months
*
Actually cannot assume oil is black mean they have no quality. biggrin.gif

If you think on another angle, the oil becomes so dark also means the detergency in the engine oil is very good.

After running for 4,000 km, it helps to clean the internal of the engine and all the dirt, carbon will be remove during an oil change.

You should be worried if the engine oil doesn't go dark tongue.gif

Forgot to mention, the Nissan engine oil is also blended by Shell Thailand.

This post has been edited by Thrust: Dec 24 2020, 09:01 AM
Thrust
post Dec 24 2020, 07:22 PM

Power To The People!!!
*******
Senior Member
3,760 posts

Joined: Oct 2005


QUOTE(xiaobaiwm @ Dec 24 2020, 06:24 PM)
Ahh i see.
Oil also so powerful can act as addictive to clean the engine.
But the power degrades when the oil turns black tho
*
Normal.. as oil gets older after usage, it also becomes thicker.. That's why you feel your engine is geeting a little sluggish as it will be more difficult to pump thicker oil rather than thinner oil.
Thrust
post Jan 12 2021, 06:08 PM

Power To The People!!!
*******
Senior Member
3,760 posts

Joined: Oct 2005


QUOTE(Jessieccy @ Jan 12 2021, 06:01 PM)
Because the NISSAN branding. More than 50% of the population is very social driven... My friend said... Everyone say... That guy say... They don't take risk, and very rarely follow their gut. Cause it's hard earn money. Plus, not everyone knows their car parts... Refill the windscreen water also dunno. More than likely, reliable brand and service centers are what they look for.
Look at proton... If not because of Geely, they wouldn't have come out of bad branding lable.
*
Actually Nissan ok geh.. Once you know the in and out of the car, it's quite easy to maintain.

The only sad part about Nissan is very tedious to remove and replace a faulty part.
Thrust
post Jan 13 2021, 06:28 AM

Power To The People!!!
*******
Senior Member
3,760 posts

Joined: Oct 2005


QUOTE(ascariz @ Jan 12 2021, 11:11 PM)
and what make me sad, is it's parts. it's hard to get original except at SC. even you have money, u need to search here and there to find original.

To find BETTER than original, is another story. 3rd party parts maker, branded one, also rarely made part for nissan.

1 example: brake pads. nissan almera original brake pad come just with brake pad.
Honda brake pad, complete set, brake hardware (those tiny clip, pins), back plate, including grease. so, when u replace brake pad in honda, all the possibility noise cause from the brake pad, is negligible. it's possible other cause if it still happen.

and people said, when you buy Honda, u pay for it's engine only, the rest is FREE. got it?  😉

not bragging here, just my expression. actually my salary can buy a Honda. i can buy it, but im not sure if i can give the best for it. That's why i choose almera at that time, so i can give the best engine oil, the best part replacement, but, it's hard to get. now my almera got many brand, cendol campur already. and im sad about it. it's not what i hope for when i bought this. i get out from nissan SC not because i can't afford it, it's their service. i hate when i complaint here and there noise, they reply with "memang macam itu almera". i don't recall all that noise when i test drive it and when i first got that car.
*
You can visit Tenan at Jln PUDU to get original Nissan parts. Do call before going to ensure parts availability.

6 Pages < 1 2 3 4 5 > » Top
 

Change to:
| Lo-Fi Version
0.1468sec    0.61    7 queries    GZIP Disabled
Time is now: 5th December 2025 - 07:25 PM