Welcome Guest ( Log In | Register )

436 Pages « < 15 16 17 18 19 > » Bottom

Outline · [ Standard ] · Linear+

 LYN Almera Owner Discussion V3, Come Share Your Experience

views
     
a_dot_el
post Nov 22 2014, 10:43 PM

Getting Started
**
Junior Member
194 posts

Joined: Sep 2010
QUOTE(arrowhead7372 @ Nov 22 2014, 05:17 PM)
i also travel those roads.

subang jaya -> pj near jaya33 area -> subang -> assunta hospital area etc.

my full tank 330kms je

i usually avoid jams, like travel at 11am, and try to return before 4pm... hardly get caught in any bumper to bumper type jam, federal highway slowdown, once awhile, but i also dunno why my mileage mcm haram
*
Your car all stock or got modification?

For engine oil I use fully syn, except during first 3 free service, 1k, 5k and 10k. They insist on giving the mineral oil, I have to argue with them to use semi Castrol Magnatec 10w30. Very lousy oil but SC don't have fully sync for 30 weight, they only have Castrol Fully Synthetic Edge 5w40. Too heavy.

Now I already switch to Nissan Fully Synthetic 0w-20 (made by Idemitsu). This is the best oil for this engine so far, very quiet, free revving and no sluggishness detected even at 10K km.

As for ATF, I insist on changing every 30K instead of 40K as per schedule. Other than that, everything else I follows SC recommendations.

Tyre pressure is 230kpa as per recommendation.

Aircond is auto, usually set between 20C and 23C.

Petrol is mainly Petronas RON95 (giving me the best millage) or alternative Caltex RON95. I can't use Shell (results like yours about 350km per tank only and pickup is sluggish), the worst. Other petrol brand is in between. Never used RON97 or Vpower before.

Driving style..... very subjective and irregular. No comment here.

a_dot_el
post Nov 22 2014, 10:45 PM

Getting Started
**
Junior Member
194 posts

Joined: Sep 2010
QUOTE(beyond86 @ Nov 22 2014, 08:42 AM)
As I mentioned, is don't rev  over rpm 4 until 1600km
*
Lol! Day 1 I got the car already pecut naik Genting drool.gif drool.gif

And the gear and engine is so free revving, easily shoot till 5K rpm.
beyond86
post Nov 22 2014, 10:47 PM

Regular
******
Senior Member
1,956 posts

Joined: May 2010
QUOTE(a_dot_el @ Nov 22 2014, 10:31 PM)
Huh later batch that bad?? Luckily mine all good. No pulling, all stable.

Or could it be the tyre problem? The Conti CC1 and CC5 that Nissan is giving is simply the worst tyre there is. Quality is not consistent at all and all is prone to problem.

Mine got CC1, and out of 5 tyre (including spares) I already have 6 punctures. The same happen to my previous car, same route, using other brand no issues. The moment change to CC1, puncture here and there.
*
CC5 now, already changed 2 pcs new Tyres but still pulling to left, before & after also pulling left.

SA keep saying OK, now I think really need to go other sc already .
Although complain to HQ, they need u go sc few times to verify , really stupid.
Want make us susah, give up complain
a_dot_el
post Nov 22 2014, 10:48 PM

Getting Started
**
Junior Member
194 posts

Joined: Sep 2010
QUOTE(nismo87 @ Nov 21 2014, 04:07 PM)
So i am not alone. It sounds ""kokkk"" when i run into pot holes. Not sure whether i need to raise my concern in SC.
*
I have this 2 times, both time I go back SC make noise. They say tighten undercarriage shocking.gif shocking.gif and no more noise.

Weird... undercarriage can loosen ???? shakehead.gif shakehead.gif shakehead.gif

After that incident so far no such noise anymore... hopefully sweat.gif
nismo87
post Nov 22 2014, 11:09 PM

Casual
***
Junior Member
339 posts

Joined: Oct 2008
QUOTE(a_dot_el @ Nov 22 2014, 10:48 PM)
I have this 2 times, both time I go back SC make noise. They say tighten undercarriage  shocking.gif  shocking.gif  and no more noise.

Weird... undercarriage can loosen ????  shakehead.gif  shakehead.gif  shakehead.gif

After that incident so far no such noise anymore... hopefully  sweat.gif
*
Thanks bro.. Thank god at least someone face this issue. Maybe i should go back to SC to verify with them. The knocking sound is really annoying.
arrowhead7372
post Nov 22 2014, 11:38 PM

Noob
******
Senior Member
1,917 posts

Joined: Mar 2008


QUOTE(a_dot_el @ Nov 22 2014, 10:43 PM)
Your car all stock or got modification?

For engine oil I use fully syn, except during first 3 free service, 1k, 5k and 10k. They insist on giving the mineral oil, I have to argue with them to use semi Castrol Magnatec 10w30. Very lousy oil but SC don't have fully sync for 30 weight, they only have Castrol Fully Synthetic Edge 5w40. Too heavy.

Now I already switch to Nissan Fully Synthetic 0w-20 (made by Idemitsu). This is the best oil for this engine so far, very quiet, free revving and no sluggishness detected even at 10K km.

As for ATF, I insist on changing every 30K instead of 40K as per schedule. Other than that, everything else I follows SC recommendations.

Tyre pressure is 230kpa as per recommendation.

Aircond is auto, usually set between 20C and 23C.

Petrol is mainly Petronas RON95 (giving me the best millage) or alternative Caltex RON95. I can't use Shell (results like yours about 350km per tank only and pickup is sluggish), the worst. Other petrol brand is in between. Never used RON97 or Vpower before.

Driving style..... very subjective and irregular. No comment here.
*
Have to check what oil they gave me. Car is at 34,000km.. i didnt ask

Currently on shell. Giving me consisten 320-330kms.

Air cond is at 23, fan speed 2 bars only.

Tire pressure always check and repump every 2 weeks.

Car is stock.

Yes. Driving style is subjective. There was once i super light footed, nv rev pass 3k. No diff also.

This post has been edited by arrowhead7372: Nov 22 2014, 11:56 PM
kkh1511
post Nov 23 2014, 12:18 AM

New Member
*
Newbie
0 posts

Joined: Jan 2013
QUOTE(beyond86 @ Nov 20 2014, 08:29 PM)
rpm 4k....

u can check the manual....
learn alot of things from manual...haha
*
I cant find it in the manual cry.gif
nismo87
post Nov 23 2014, 02:59 PM

Casual
***
Junior Member
339 posts

Joined: Oct 2008
QUOTE(kkh1511 @ Nov 23 2014, 12:18 AM)
I cant find it in the manual  cry.gif
*
Bro, kindly refer to page 5-2 in "Break-in Schedule".



Attached thumbnail(s)
Attached Image
beyond86
post Nov 23 2014, 03:37 PM

Regular
******
Senior Member
1,956 posts

Joined: May 2010
QUOTE(nismo87 @ Nov 23 2014, 02:59 PM)
Bro, kindly refer to page 5-2 in "Break-in Schedule".
*
Infact, it apply to all car.
Since I was kid, always heard adult talked about this.
Rev below 3k until 1000km & first service
kkh1511
post Nov 23 2014, 04:55 PM

New Member
*
Newbie
0 posts

Joined: Jan 2013
QUOTE(nismo87 @ Nov 23 2014, 02:59 PM)
Bro, kindly refer to page 5-2 in "Break-in Schedule".
*
Thx! rclxm9.gif

*do not drive at constant speed... hmm......
nismo87
post Nov 23 2014, 05:43 PM

Casual
***
Junior Member
339 posts

Joined: Oct 2008
QUOTE(beyond86 @ Nov 23 2014, 03:37 PM)
Infact, it apply to all car.
Since I was kid, always heard adult talked about this.
Rev below 3k until 1000km & first service
*
I revved the engine beyond 3k but below 4k in it's first 1k. You know sometimes the car is a bit under power when it is going uphill.
nismo87
post Nov 23 2014, 05:45 PM

Casual
***
Junior Member
339 posts

Joined: Oct 2008
QUOTE(kkh1511 @ Nov 23 2014, 04:55 PM)
Thx!  rclxm9.gif

*do not drive at constant speed... hmm......
*
laugh.gif , I wonder what the manufacturer is trying to tell us..
beyond86
post Nov 23 2014, 05:46 PM

Regular
******
Senior Member
1,956 posts

Joined: May 2010
QUOTE(nismo87 @ Nov 23 2014, 05:43 PM)
I revved the engine beyond 3k but below 4k in it's first 1k. You know sometimes the car is a bit under power when it is going uphill.
*
I did my first service around 800km, never exceed rpm 3k.. .
I got the car that time is about 50km.. ..


Before 50km SA or tinted guy got rev beyond rpm 3k I dunno lo
beyond86
post Nov 23 2014, 05:48 PM

Regular
******
Senior Member
1,956 posts

Joined: May 2010
QUOTE(nismo87 @ Nov 23 2014, 05:45 PM)
laugh.gif , I wonder what the manufacturer is trying to tell us..
*
Cannot all the time maintain eg, 90km/h
Need 80 - 90km/h. ....
Up down up down ??
nismo87
post Nov 23 2014, 05:55 PM

Casual
***
Junior Member
339 posts

Joined: Oct 2008
QUOTE(beyond86 @ Nov 23 2014, 05:46 PM)
I did my first service around 800km, never exceed rpm 3k.. .
I got the car that time is about 50km.. ..
Before 50km SA or tinted guy got rev beyond rpm 3k I dunno lo
*
http://www.mototuneusa.com/break_in_secrets.htm

Try at your own risk... he has proven result with his way of breaking in new engine
shinchan99
post Nov 24 2014, 10:11 AM

On my way
****
Senior Member
619 posts

Joined: Feb 2005
QUOTE(nitromx @ Nov 21 2014, 11:05 PM)
Anyway to disable seat belt warning beep?
It's pretty annoying sometimes.
*
Easiest way go to any accessories shop, or you can DIY yourself. Find directly underneath your car seat there should be a clip + wire attached to the bottom, just unplug the clip smile.gif No need to buy those dummy seat belt
arrowhead7372
post Nov 24 2014, 11:25 AM

Noob
******
Senior Member
1,917 posts

Joined: Mar 2008


U know... U should be wearing ur seatbelt...
nitromx
post Nov 24 2014, 11:27 AM

On my way
****
Senior Member
532 posts

Joined: Nov 2004



QUOTE(shinchan99 @ Nov 24 2014, 10:11 AM)
Easiest way go to any accessories shop, or you can DIY yourself. Find directly underneath your car seat there should be a clip + wire attached to the bottom, just unplug the clip smile.gif No need to buy those dummy seat belt
*
u guys did this ?
or buckle up everytime?
shinchan99
post Nov 24 2014, 11:48 AM

On my way
****
Senior Member
619 posts

Joined: Feb 2005
Buckle up everytime, but i put the seat belt stopper for more comfort drive smile.gif RM 10 only
beyond86
post Nov 24 2014, 11:52 AM

Regular
******
Senior Member
1,956 posts

Joined: May 2010
QUOTE(nitromx @ Nov 24 2014, 11:27 AM)
u guys did this ?
or buckle up everytime?
*
buckle up la....unless traffic jam like hell....

once over 2 mins, it won't make noise more, just blinking

436 Pages « < 15 16 17 18 19 > » Top
 

Change to:
| Lo-Fi Version
0.0184sec    0.50    6 queries    GZIP Disabled
Time is now: 11th December 2025 - 06:31 PM