How bout the power supply?

Put 6 wires then to be more save.

ME is manual clean by human.
Can easily open out the grill to access into blower for clean it out like table fan.

Daikin & York to be the same platform, last time I wanna clean the York inverter n remove the air grill and the clip broken, but still need tool.

Toshiba quite rare never used b4

This post has been edited by kimsim: Nov 9 2014, 11:45 AM

Actually is can, but we not sure the aluminum coils fins can take the high pressure or not.

Some gas pipe would leaks at corner area or connection screw nuts location.

Nowadays seem like new Aircon quite cheap, no point to be upgrade and make a high risk.

This post has been edited by kimsim: Nov 12 2014, 03:22 PM

If the only solution for pana inverter then don't have a choice.

Next time you guys if can then ask the comtractor put in at least 6 wires to be save a trouble in future.

Refer my review here, for nothing can be self cleaning
http://www.kimrovacstore.com/mitsubishi-el...lean-video.html

5-10 mins is around there, much easier than table fan.

No one talking Aircon again?

Due to raining season?

Toshiba quite ok, but very rare, I dun think some smaller Aircon shop would carry it brand, also compressor made in Japan like Fujitsu.

Parts wise much expansive if any issue after few yrs later.

This post has been edited by kimsim: Nov 17 2014, 11:41 AM

ME very common in SG or JB.
For me is not an issue.

Toshiba even the Aircon seller also told me about spare parts much expansive.



But last time I saw in Sibu quite a lot numbers of user used Toshiba daisekei.

This post has been edited by kimsim: Nov 17 2014, 12:14 PM

If compare to ME much nicer

LG black glass & hitachi as sleep model, the rest quite boring.

After install sharp n Pana please sharing here.

This post has been edited by kimsim: Nov 17 2014, 06:17 PM

But Pana is branded and design quite cool wow..
Used Pana got face, when used samsung ppls won't asking

This post has been edited by kimsim: Nov 17 2014, 06:27 PM

Just refer the input watts : 1hp normal at 800w vs 1.5hp for 1000-1100w.

Over here even switch on slow but the power consumption is too much from 1.5hp.

Unless you buy inverter, even 1.5hp after from the input watt may reduce into half or 70% of after keep cooling the room area.

70% reduce on part loan vs non reduce at 100% Power Consumption

If wanna cold n quiet go with ME you never say regret lah.
Myself dunno how many unit in between 2 country

Fixed speed meant never reduce the power input watt from maximum power at 1kw per hour.

Once temp. are reaching n reduce from on/off compressor to be save a bit only.

How does inverter work?
Detect outside temperature & indoor temp to shots up in high Jet speed from compressor and fan motor, once is hit on n reduce to minimum as 400w or 250w as low for lower BTU to keep it maintain as same temp.
So call it part loan, how to save energy?

From part loan you save more, unless you suddenly increase lower from 25c to 23c for suit up more ppls.

Then the High Jet motor would working in high speed again.

Mahal for 1 time you pay, the rest you enjoy like boss, cheap meant you balance up for every month.

Hai ya depend your budget lah... Never ask you follow

Just suggest n my opinion only