surprisingly, when I set 22c at aircond, I got the same 22c +/- 0.5c on my bed. so nothing wrong with the temperature, what else can be the contribution to coldness?

yeah true

my York is very dry, with plasma/nanoe-G/ionizer, humidity is around 60% compared to 30%

I will try to play around more with the pana inveter, it seems the humidity always stay at 60% regardless of the temperature set

This post has been edited by babyk: Apr 24 2015, 01:56 PM

1.5hp is not enough, get 2.0hp Daikin inverter

Get inverter 2.0hp

2.0hp sure enough to cool down fast, 1.5hp you might need longer time to cool, hence it will use more energy than 2.0hp

yes

sure
what brand what model?

ah~
my pana inverter S18RKH was installed last week, then I felt the aircond was not cold compared to my S10RKH and S13RKH, called the installed yesterday and today they came to check

not surprised, the gas was not enough in the compressor, the gas was only half filled! They refilled the gas and now it's super cold

either cut cost or the QC did not bother about the gas filled, because they know the installer has to check

anyway, no cost incurred for me as it is bear by installer

Pana parts are made in Malaysia at Kulim plant

Nope, they are doing parts, assembly is done in Selangor

http://www.panasonic.com/my/consumer/home-...s-s10rkh-1.html

PKH is 2013 model
QKH is 2014 model
RKH is 2015 model

expensive

I bought it for RM1320 for 1.0hp, RM1650 for 1.5hp and RM2680 for 2.0hp

same goes to Samsung washer, 2014 model is H series, 2015 model is J series

Do you already have inverter piping? minimum 0.6mm thickness copper

the 1.0hp i got free installation while the 1.5 and 2.0 i need to pay for installation

oh my oh my

i should have waited and get York instead of Pana

Daikin parts are more expensive than Pana

York parts are cheaper than pana