The motor still run right ? It's normal problem dy 

lol sounds like you're using the plastic one and the thing broke.

need to spray silicone spray at the rubber quite often

got metal type

yeap that sounds about right.

only thing is that the metal type is slightly noisier than the plastic type in terms of vibrations and the feeling when you close the door

smoother wind up/down maybe coz the fella added some silicone lube on the rubber, i'm talking about the metal itself vibrating when you drive on uneven roads or when you close the door

actually it should also vibrates to a certain extent if blast music =p

anyway, i have a pair of old used front seats and a front bumper.
any takers?

if not, can recommend any kedai potong which i can donate to?

Left side ok. Right cover pecah but working.
umm does ns want the fogs (dont think he wants kenot fot intercooler kot)

Sry sry i was away.
Where are u based?
Im in pj

Hmm i am working on the new waja KilleRom V10...  Going to make a special promo for new user and existing user... 

You will love the improvement....
Now with spark dwell time management where it increase lotsa torque on the low end....  Enjoy at town drive or gymkanna sendiri syok sendiri...

Will update the info soon....

KilleRom V10 for Waja is ready to served....

Existing customer may come and upgrade your ROM at a special rate.
2001 - 2003 Waja 4G18 V10 Rom (CODE E03) AT or MT
2004 - Above Waja 4G18 V10 Rom (CODE E44) AT or MT

PM me for more information and remember to provide the code. (eg: E03-AT)

-Launch Control
-ECU Traction Control
-Cooling System Control
-Bigger MAPPING available up to 11k RPM
-Dwell Spark control table
-Smart Ignition Timing system
and ETC

Kuching...  Nope but u can send the ecu to me

apa susah susah.......

[attachmentid=4255267]

Last time I bought damn cheap, market flooded with it around RM220 I think, the leather version. Plug and play only but buttons different story lol

depo not that bad....but if want really good light...retrofit the depo! 

now got basic kit mini H1 bixenon projector cheap2 rm250-300 range...even better output..sharp cutoff line with those flicker line woooo....
but i got another idea now..get a set of alza headlamp...want to try custom fit the oem projector+highbeam bowl on wira headlamp....  definately gonna tweak the alza projector output...this one i plan to maintain halogen setup....

yup..their highbeam was normal round lamp beside the projector.....the size (without actual measurement) looks like can be easily modded into waja....wira possible but i'm sure need major cut and taking a lot of time.....

their projector is quite good for oem halogen.....

which is surely will blow away the stock waja headlamp performance...

FC is almost similar to 1st killerom reflash. im averaging around 12km/l.
But its difficult to say that killerom v10 consumes more or less fuel over just one tank.
my latest run got me 12.08km/l which is 80% urban with massive kl jams, a few run-ins with rude myvi/vios.

the waja has been throwing tantrums. FC kdg baik kdg x baik.
after reverting back to 195/55r15s the FC improved to 13-14km/l (previously was on 205/50r16s)

i've been keeping tabs on FC since 2011; lost all my FC data after i had to hard reset the phone (kept data on app).  shifted to google docs every since mid 2013.  you all can view my logs at the link below.

https://docs.google.com/spreadsheets/d/1Op_...dit?usp=sharing

(also includes my friends waja campro data  )

am testing a tank of RON97 now hehe.

My waja car trunk spare tyre will soak water like fish pond...is there anyone facing this problem? FYI, 3 years back my car hit from behind and changed the bumper and 2 tail lights. where can I repair this? Mugduard lou? or paint shop? or accessories shop?