My google contact is fine...is not my google cntct have duplicate its the phone i.e. wechat, watsapp, waze contacts etc...and I cant access (contact to display ) phone local unsynced. If I could I doubt it has d delete all menu instead, need to delete 1 individual by individual :faint:

U mean the cover ,in the long term, peels the back cover of your sandstone? Ughhh...even casing alone can do this?

Lastime i use S2 and chapalang cheap transparent those rubber or hard plastic but bendable type and it peels all the edges of my S2 till d metallic paint comes off. U mean this on your phone back cover right?




This post has been edited by wayfeel: Oct 1 2014, 07:56 PM

I think google pinyin input is the best keyboard for me. its a non-swype i think

I love it and it is irreplaceable because I like the up-swipe the button then can get capital letter 'T', swipe down get the symbol or number like 5 or comma, press it then is normal 't' so it minimize time without the additional presses to get the same job done. I love this kb, I used to have swiftkey but have since obsessed with this kb due to the mentioned feature that no other kb have



This post has been edited by wayfeel: Oct 1 2014, 10:20 PM

I migrated from huawei ascend mate, huawei's flagship, 1.7ghz quad core, 2gb ram...consider quite smooth oledy.
The 1+ spec is among the highest in the market, so, very smooth but certain opening apps i.e. WPS Office excel bit lag (not my unit have problem, I believe is overall android ) so I m really asking alot there

Durability wise I think these guys are mentioned the back cover of sandstone, the texture will peel off over time so might need your average TLC (tender loving care), bend strength should be up there among the stiffest or toughest....and some x-evidence of water proofing ability. So durability is abit mixed bag of beans. I put the silk white original back casing to my sandstone so getting the best of both worlds.

Battery life is another dept liek performance that exceeded my expectation....The performance part I'm quite satisfied already, expecting more from it is asking alot from android set current (technical) ability which I believe is android's own limitation...in other word, the set piece performance is really *that* good. Probably much thanks to the cynogen guys.

the 1.7G quad huawei ascend is a huge 6.1, and 4050mah, a monstrous battery....can clock SOT 7-8 hours no problem has still got enough juice for the rest of the (quieter) evening. not expecting the 1+ to match but it totally gives more than enough battery not just after work but till before bedtime... can SOT 6hrs without breaking a sweat. Maybe lately abit quiet at work, I can still remain 40-50% battery after 5pm with SOT 3-4hrs. (I'm on powersave & balance)

So all in all, the phone really did a fantastic job, more or less exceeded all my expectations (marginally).

I would summarize it in the most appropriate quote for it, like the Razer gaming peripherals product.
1+1 is passionately made for smartphone enthusiasts, by smartphone enthusiasts (including cynogen).



This post has been edited by wayfeel: Oct 1 2014, 10:52 PM

I'm on stock rom, yet to root, have been on ART for several days now...in fact, since the 2nd day of us together...no issue or glitch at all..

But the significant improvement that I notice from ART vs dalvik is the wechat apps....the wechat very devour the android hp actually, I mean the operations is very 'bottleneck' feeling, meaning the photo load very slow and it 'kik' /not smooth with the wechat...but once ART, the wechat is smooth as butter. I was surprised...

I've yet to discover others as i've not very long on dalvik. I may revert back to dalvik someday and use it longer but since I use wechat often, it's hard to ditch aRT

/it can happen on powersave mode but rare. It doesnt happen in balance mode for me

edit: i';m using google pinyin input...which is my favorite btw



This post has been edited by wayfeel: Oct 3 2014, 03:52 AM

OEM (original equipment manufacturer) is not original? if yes, then what is the original original call?

balanced is good enough.

powersave 0.3-1.Ghz
balanced 0.3G-2.5Ghz
performance 2.5Ghz all the time i think which will be quite battery consuming, more for performance test benchmark , no need performance mode for normal usage.

I'm surprised that the 1+ battery is a li-po. I din know it, I thought the normal li-ion :delightful:

Basically Li-po is arguably safer, lighter, moldable, more consistent and has more energy in d same size (say if the powerbank is 1000mah, can give out 90% vs 70-80% than li-ion), but shorter lifespan and costlier to produce.

Li-ion is opposite of all above but cheaper to produce, can produce higher (not more) energy , better life span but more volatile

In short, it shd be safe to say and arguably, li-po is more superior than li-ion batts

But the gripe is, some Li-po batteries r Li-ion in polymer casing so when we get a Li-po make sure its really the li-po chemistry. Don't ask me how i dont know

More on batteries Li-ion vs Li-po

http://batteryuniversity.com/learn/article...e_ideal_battery

Quote:

Improved safety - more resistant to overcharge; less chance for electrolyte leakage.
Limitations
Lower energy density and decreased cycle count compared to lithium-ion.



This post has been edited by wayfeel: Oct 7 2014, 01:10 PM

I was at a crossroad before, between a 3 weeks old used oppo find 7 at rm1450 and this 1+ new set sub rm1300...I took the later on better battery over vooc charging (due to lesser lcd to Find7)

ya it happens to me as well. i wonder how to overcome this

I saw in the playstore, the tinted status bar SAMPLE by jeff gilfelt is fantastic but unfortunately its cant use de...anything close resembling that?

Yes the capacitive may make the LCD screen estate larger and the bezel thinner which is nice...but being practical (aside from using a 5.5" smartphone ), using the on-screen buttons are much more accessible and additionally, better grip of the phone while at it...

That's why my previous mention of the tinted status bar by jeff was fantastic, it made the whole screen look larger yet with the (arguably) 'more' practical on-screen buttons (also +grip)

I wish the on-screen buttons like my huawei ascend,
have a real tiny downward arrow on the left to hide the on-screen button and anytime can summon the on screen navigation buttons back by sliding up from the bottom lcd. real useful....

I was on ART, getting SOT alittle under 5hrs with 30-40% batt remaining.

Just reverting back to dalvik and see how

I'm on 33R



This post has been edited by wayfeel: Oct 10 2014, 01:51 AM

I was using 1+ original back case, white. so slippery and expensive...more than rm65
Because the casing is hard, I believe IF i drop my phone, the casing will split with the casing after the first drop so the second drop will dent my phone. Sorry I didnt do a fall test with it

So, I got a soft rubber back case rather thin casing almost over a week ago....rm15
I accidentally dropped my phone and the rubber casing really protected it well

Just now browsing some backcasing...saw this IMAK clear air case, watched the ytube and got to know it's a hard back cover casing...Anyone EVER dropped their phone with a hard cover casing and dent their phone due to separation of the casing during the 'fall-bounce'? Happened to me before with my huawei ascend, it using a heard back casing...it dent the corner of my phone

I saw my friend HTC M8 totally clear like IMAK clear case but it is a soft casing, really tight and thin...I'm looking for that ideal casing for meself...anyone got recommend? I like clear case.

Another advantage of soft backcasing vs hard casing is when u want to take the phone out to show ur friend of the back texture or adore it naked at night, u have to effort to pry the phone out from the hard casing and WITH extra care so as not to scratch the phone in the process because the hard casing grip the square edges of the phone might flex the phone in longterm while the soft casing is much less effort and without concern if it will scratch the phone because the casing is soft yet more fall protection , I believe. What do you think?






This post has been edited by wayfeel: Oct 10 2014, 02:02 AM

Nice to know that they got the hybrid. quite choosy when comes to personal casing coz prefer thin casing coz still want to bask in the thinness and svelteness of the 1+


your suggestion is interesting, to use the phone naked n change the spare 'original' back case but i doubt it's that cheap and still can replace the original cover so fittingly...where do u find it...

And gunmetal my favorite color of all time...I believe it's ur own custom spray ,right.

My first priority will still go for thin & clear tpu casing

Edit: Pls check for ur friend's HTC M8 such casing for example that I mentioned. I adore his but simple clear htc casing lol such casing really bring out the best charm of what the phone is intended for.



This post has been edited by wayfeel: Oct 10 2014, 02:18 AM

lol
DannyOP

Why is there no PURELY clear SOFT TPU case???
https://forums.oneplus.net/threads/why-is-t...tpu-case.96394/


got clear tpu here
http://www.oppomart.com/tourmate-tpu-skin-...eplus-one.html#



This post has been edited by wayfeel: Oct 10 2014, 02:57 AM