i had to reapply a few times to get it just right but even then its still not perfect.

appreciate if you can do that..cant find it..

Morning lowyat-ians!

thanks again for being with sakurazz for such a long period

and for those who pm-ed me inquiry about z3 glass and case, please refer here for your kind perusal

https://forum.lowyat.net/index.php?showtopic=3379110&hl=

Cheers

Reapplying many times would definately spoiled the sp no?

As long as you dont crack or chip the glass its ok. In my experience tempered glass are more forgiving to re-application compare to plastic screen protectors. plastic screen protectors you need to be very very gentle not to make it even a little bit out of shape. Once out of it flat shape the plastic screen protector will have bubble already. Even when done with a tape will still have 50% chance of that happening.

Tempered glass problem is that you cant use tape to redo it because it attach really really well to the glass. So i uses something with a very sharp point and gently lift it up. Just need to make sure you dont chip. Then gently lift it up to avoid cracks because tempered glass can also be quite fragile if you apply bending forces to it. They are only strong against compression force.

This post has been edited by WhitE LighteR: Oct 15 2014, 10:46 AM

my experience in applying tempered glass is use nail (not too long, not too short) to lift the glass is better than sharp objects. sharp objects like paper knife will damage the adhesive layer of the glass, resulting in chip or bubbling at the area.

Btw guys, I plug my newly acquired audio technica m50x headphones in the z3 and it seems that i would need to get a portable amp. Although the m50x is suppose to be easy to drive, i feel the z3 like doesnt have enough power to drive this headphone to the level i wanted. When i plug it into my PC the volume is louder but of course more terrible quality sound due to crappy on board audio.

This post has been edited by WhitE LighteR: Oct 15 2014, 11:05 AM

Its a common thing among the xperia line up.

I have some small bubbles on my Glass Sp on my S4. It wasn't there when installed. Could be due the the phone getting hot and cold and thus the small bubles starting to appear. What do you think could be the solution to this?

u mean the volume not loud ?

for those interested in dual lte, there are some on lazada going for RM2134, can get cheaper (if u know what i mean)

Yeap. Heaven n earth comparing it to the m8.

haha.. im charging back my m7 to test out the headphone there...

Waterproof so cannot compare

i've tested m7 vs z2..
speaker wise is quite similar tho but m7 is slightly better with beats on~
z3 supposed to be better than z2... is m8 too great or what?
i never test m8 before..

Sony Xperia Z3 and Z# compact comparison.. to help you decide which sine to get.

http://www.hardwarezone.com.my/feature-son...mance-two-sizes

Im comparing the headphone output, that's the discussion earlier right? Correct me if I'm wrong.

On a side note, z3 external speaker is amazing. Comparing to the m8 it lacks the bass and fullness but i thought I liked the clarity and highs a lil bit more than the m8. N ITS WATERPROOF!!!!

I believe the reason is the thickness. no speakers can perform given a 6.9mm chasis. Give and take lor.

i'm currently using case mate barely there back case which i brought from,

Here

i wan it, how to get cheaper one z3 dual sim bro? hehe... & lazada handphone COD not available... huhu

This is the white litmus paper in Z3.


Attached thumbnail(s)