will spoil the paint...
the whole looks of casing willl spoil...

DeMoNkInG...
just try using paint remover...
you can ask it from any hardware shop near u...
not expice...
u can get it below 20.
more information pm me...

i have some prob with my uv acrylic....i've cut it but i put it on the floor...now there is lots of scratch on it ...when i switch on mu uv light the scratch is so visible n looks really ugly ...is there any product to cover up those scratch??

You removed the protection-sticker before you cut it ? That's bad bro...

no no..there is no protection sticker...i bought the ac ryan uv acrylic...it's in a thin box with a plastic bag cover it up in the box...so i thought it can just be put on the floor

LOLZ

MOST OF THE LINK TS POSTED IS DEAD, can AnyBody do ANYTHING BOUT IT?????

i painted flat black for the interiors of HAF 932 but how do i protect the paint??

if clear coat then the paint will be glossy

any infos and where to get it

im frm perak

guyz i need help here... how to open the front panel of cm690 casing... hard to take out or cannot?

where can i buy that one transparent plastik board..??

it stated in the user manual.
pull it hard from bottom of the casing..

---

Added on January 23, 2009, 8:40 pmu mean the acrylic rite?
check here http://forum.lowyat.net/topic/805102

This post has been edited by dan137: Jan 23 2009, 08:40 PM

hi guys

i have a few question regarding modding an ALU case

1. if the case is dirty (dust) and fingerprints...how do i clean it up?
will water be effective? soap? or any chems (alcohol or any solvent) will help ease the process?
im afraid of rusting the case if i use water

Hurm.. anyway... Does aluminium get rusty?

I juz use wet cloth to wipe the dust and fingerprint off...So far my case doesnt get any rust...

hi guys ~

i got a question here

i have an extra casing on my hand , i had strip the top and both side off and front panel off for a repaint

What kind of sandpaper i can use ? ( and i tried 400Grit .. damn painful process ... )

And .. the front panel is plastic ... how ? use sandpaper also ?

after sanding , apply primer ? let for it dry for how many days ?

then after primer color coat right ? after colot coat , clear coat ?

then done ?? is it just that easy ?

hmm.. i have 1 question..
can i sound proof my computer?

material would be those can be brought for sound proof car..

then my concern.. is will it effect my pc temp?

i using cooler master CM690..

i plan to sound proof the right side and left side(follow the shape of the metal casing)

thanks,

kok foong

niclasteoh had the thing you want

Try PM He

Hmmm that is like a sheet of rubber for absorbing vibration and sound too ~

thanks for ur info..


hmm.. will it produce or absorb more heat and then will make my casing warm..

anyone have done it before??

actually my come just next to my bed..

thats why i wanna sound proof it...

check out car accessories for sound proofing materials ..

normally it's neoprene ..
if you're ghetton modder, those 30 eggs cardboard can muffle sound as well .. lol

just walk in those car accessories .. ask them politely for sound proofing materials .. they'll show some example .. pricing

those materials wont absorb heat .. coz they're petroleum byproducts (something like our plastics)

if it's bout sound proofing .. since most sounds like caused by fans ...
by changing a larger fan (120mm~140mm) and run it a lower voltage is more reliable ... not just it runs cooler, it run quieter

80mm (8cm)
3.142*4*4 = 50.272 cm²

120mm (12cm)
3.142*6*6 = 113.112 cm²

1x120mm fan > 2x80mm fan

hope this helps

i have a Raidmax Sagittarius Case(Black n Silver),i plan add some UV Light Kit,
my question is what color schemes should i go for? what ur guy suggestion?
the color schemes in my mind is Blue + Yellow, is it ok?