just update to TD-W8951ND_V5_14111
but cannot access 192.168.1.1 thru wifi or cable.

later try restart.

I need help suddenly can't create multiple SSID ??

Please use TD-W8951ND_V5_14111 firmware

most of the times, the firmware updates are for router routing function, less or none of the updates are for sync, bridge functions.

@Anime4000 how u disable the 3 other SSID? total got 4 included mine SSID. i already choose broadcast SSID: NO for the 3 SSID

when u using hp search for wifi u can't see the 3 SSID but it still exist. wifi analyzer stated got extra 3 SSID overlapping on ur main SSID which can so how interference. now i filtered out 3 MAC for the extra SSID.

v6 is out but i tried flashed 4 different ras files all failed & not compatible.

This post has been edited by ngkhanmein: Apr 22 2015, 03:08 PM

Mine... I reset to factory settings, it use TP-Link default settings which is one SSID
btw... this riger has so many backdoor, I enter someone wifi even do Login Info Harvester to steal some then rename Wifi to something and broadcast SSID let other ppl use =P

Silly TM... dumb on this thing.

thanks solved the issue.

This post has been edited by ngkhanmein: Apr 24 2015, 02:23 PM

Do u all still using the riger?

yes I am, it make it dumb modem only, disable WiFi, since I using DIR-820L US version.

Hi, I need some help. I wonder why can't I access to the internet, which the upgraded router has it's DSL light off (indicating on), but the internet light won't turn off. Maybe I missed some settings?? I did as the instructions, flash TD-W8951_V5_140226 then flash TD-W8951_V5_140306.
Gracias!

The device is actual Riger Modem?

Yup, the same one, The model name - ADSL-RIGER_DB120WL.
Maybe I did wrong with the settings, like maybe VCI/VPI.
Which I would like to make a correction about the VCI/VPI, it's the other way round right??
Should be VPI/VCI right???

This post has been edited by ffckyou13: Jun 11 2015, 11:35 PM

0/35

Hmm, other setting i need to change? Changing the vci/vpi doesn't work it seems. Still can't connect to the internet.

Edit:Ah nevermind. It works now, my bad.

But i was wondering, diagnostic shows fail for:

1)ATM OAM segment ping
2)ATM OAM end to end ping
3)ATM OAM F4 segment ping
4)ATM OAM F4 end to end ping

Not an IT expert here, what's that suppose to mean anyway?

This post has been edited by Sairenji: Jun 15 2015, 09:19 PM

ATM = Asynchronous Transfer Mode
I believe these was blocked/not supported by TM.
Simply see DSL, up = have connection.

upgraded mine, but seems like after a few restarts (ie. raining and so on), i cannot access the main router page using 192.168.1.1. Am i missing something here? btw, the internet is working superb

This post has been edited by creezalird: Jun 16 2015, 01:22 AM

Mine I tried Riger without my D-Link 5GHz and test, it's works fine with 4mbps streamyx, then end up converting Riger into dummy modem purpose only (WiFi/DHCP disabled)

Restarted router with LAN connected to PC, suddenly i can access 192.168.1.1 again. Updated to TD-W8951ND_V5_141114. And now so far still working fine. Thanks for the guide @Anime4000

Mind telling me how to do the downgrade process?

Just use old TP-Link Firmware.

Hi TS, thanks for the info, just flashed the firmware today and so far so good.
Would like to know if there's a way to increase the number of 'Wireless MAC Filtering' ?
thanks!