mean they change your existing modem and continue warranty period? if expired, new modem become expired?

yeah maybe due to my bro work under TM haha

Anyone knew the configuration of the modem? After I flashed for some reason all setting becomes default..

This post has been edited by whomiask: Jun 20 2014, 06:17 PM

I tried my both modem, it retain the settings...
just configure normally, some what VCI/VPI around 0/35

The DB-120WL can save its configuration file? Is it the ROM file? It's the only thing can be save..

This post has been edited by whomiask: Jun 21 2014, 09:17 AM

Interested to see TM/Riger is using tplink products now.

hi.. new to this modem..may i know where u check total devices connect to that modem.. i click status, here and there but couldn't find ..

too bad

mine same modem casing, but it is maritime w3400v6, ought to be huawei oem as the gui similar to huawei

Amateurs who are attempting this.

Please be careful on what you're doing.

Always refer to the make brand and model number at the top left of the modem front face labelled in white.

It only applies to Riger DB120-WL.

TM is using a universal design silver casing for all their modems and routers now. That includes their ONTs, home gateway routers and STBs.

There's also the Innacom ADSL2+modem that is also in distribution now which looks excatly the same as the Riger DB120WL but slighly smaller in size.

Do Not Attempt The Firmware Upgrade On This Model

Always confirm your modem's make/model before proceeding.

hey bro,i done download TP-LINK TD-W8951ND v5 it work and nice,but can i gate back firmware V4 ori Riger DB120-WL..,i new use

This post has been edited by Apexi77: Aug 14 2014, 01:14 AM

how to check someones stealing wifi on adsl riger db120wl?

thanks...

try this

i managed to upgrade but my TM logo is RED.

>> Testing Ethernet LAN connection ...
PASS

>> Testing ADSL Synchronization .
PASS

>> Testing ATM OAM segment ping ...
PASS

>> Testing ATM OAM end to end ping ...
PASS

>> Testing ATM OAM F4 segment ping ...
FAIL

>> Testing ATM OAM F4 end to end ping ...
FAIL

>> Ping Primary Domain Name Server .
PASS

>> Ping www.yahoo.com ...
PASS

Hi Anime4000, thanks for the info. Upgraded to V5 no problem. I found a V6. Is it okay to upgrade to V6 as well? www.tp-link.com/resources/software/TD-W8951ND_V6_140514.zip

After flash, I put default settings, and then enter streamyx login info, but i can't connect to internet.

" These VCI/VPI -> 0/35, is important "
I have done all steps w/o above 1 step, i cannot connect internet.
If found duplicate when change setting to 35, please change to other VPI to other number (i put 36).

Now it's ok already!

Hey peeps, interested to see the modem can be flashed with tp-link firmware.

Anyone can help me out to look at the DDNS section on the newly installed TP-LINK web interface, is there an option to change the service provider of the provider other than dyndns.com?

My only reason to flash it to the tp-link firmware is to be able to use the ddns other than dyndns. I've another tp-link wifi router that has that function built-in.

thanks peeps

I am new to the 4Mbps Streamyx using Riger DB120-WL, may I know how do I see the list of connected clients to my Riger? I went through every tab / options but I cannot see it. Sometimes, I wanna know what IP is assigned to a certain computer. Anyone can help?

Interface setup -> Lan -> Current pool summary

I will give it a shot tonight - thank you.

can someone teach me how to setting qos for this TM stock modem.? ty.