Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 DIY (smart, energy efficient) house building, another house from scratch. DIY style.

views
     
CoffeeDude
post Aug 12 2014, 04:31 PM

Regular
******
Senior Member
1,609 posts

Joined: Sep 2005
From: KL


QUOTE(paskal @ Apr 29 2014, 08:19 AM)
if you engage an architect, insist that they do a site survey or site study.
it's the only way to check for sun movement and wind direction in the area. simple info that will make your house cooler and properly ventilated.

avoid orientating the largest wall in the house against sunshine as it will heat up the area inside. avoid arranging bedrooms directly facing the evening sun as it'll make your room hot at night.
and change the direction of your window opening to guide wind into your house, rather than deflecting them away.

user posted image
user posted image
can't find the complete 3D design since there's so many interation and revisions to the plan. it's in here, somewhere.
but the cheapest i got quoted for this plan is RM260k.
basic house, basic equipment, good build quality (from contractor past build history).

specs agreed for RM260k:
12 feet wall
metal deck (because roof pitch is only 5 degrees x 40 feet)
insulated roof
folding door, folding window
full plaster ceiling, 10 feet high
normal downlight, cfl bulb
normal ceiling fan with regulator
16" tile, entire house
full height tile in bathroom
normal paint, indoor and outdoor
normal bathroom finishing
no outdoor tile
no glass railing as in pic

IIRC 4 bathroom, 5 bedroom, 1 ht room, wet & dry kitchen, separated guest living room & dining area, family area, 2nd floor family area, 2 decks.
~3000 sqft interior floorspace.
translates to ~RM86-something psft

edit: (refer post below for accurate floorspace)
*
whoa I'm tracking this topic biggrin.gif

My target is to build a 3000sq ft single storey house in 5-10 years time biggrin.gif

Did you hire architect?
Do you need specialized contractor to do the HT room?
CoffeeDude
post Aug 14 2014, 11:24 PM

Regular
******
Senior Member
1,609 posts

Joined: Sep 2005
From: KL


Wow you did all the drawings yourself? shocking.gif

But for contractors don't they need the drawings for the internal wirings, water piping, air-con piping?

How about security - CCTV, alarm?
CoffeeDude
post Aug 22 2014, 09:49 PM

Regular
******
Senior Member
1,609 posts

Joined: Sep 2005
From: KL


I would choose the solution that would avoid water leak problems.

Functionality out weighs aesthetics.
CoffeeDude
post Sep 8 2014, 03:45 PM

Regular
******
Senior Member
1,609 posts

Joined: Sep 2005
From: KL


Are you sure about using AAC bricks.
I've read somewhere that it is not strong enough for load bearing.

 

Change to:
| Lo-Fi Version
0.0283sec    0.35    7 queries    GZIP Disabled
Time is now: 26th November 2025 - 03:19 AM