nice.. but err AOC.. not nice.

btw decided. If 4790k next few days will be a cracker. going to back to WC. I NEED 5GHZ Haswell


This post has been edited by cstkl1: May 11 2014, 09:33 PM

u is the funnies
https://forum.lowyat.net/index.php?showtopic=3193277&hl=



lol is that a rampage VI Black??
Ek new all in one block is pretty damn nice.

that was one very nice build.

close lar ure thread.

interesting.. more details on the rampage vi build...

not yet.. 2nd June..but we will be getting more confirmed rumours, specs etc... if the 4.4ghz thing is true...
buy buy buy...

This post has been edited by cstkl1: May 11 2014, 10:36 PM

http://linustechtips.com/main/topic/150760...de-and-outside/

eh different nick..

following.

but 760t?? errr with 780ti tri-sli but 1866 plats errr with 4970x (errr theres a 70 now??) with a single gtx neutro 240gb and 1tb WD errr

didnt ure customer/friend went overboard with the mobo/extreme proc??? sacrificing rams,casing,hdd+ssd

shld be a epic build.. gaming at 4k??

This post has been edited by cstkl1: May 11 2014, 11:19 PM

eh just go to pharmacy
get 50ml syringe, a 10/12/14mm Ryles tube
Done

This post has been edited by cstkl1: May 15 2014, 10:49 AM

Too slow...

This is really cheap like less than RM2. Ryles tube+50ml Syringe.

hmm saw this at a vid the syringe .. good idea especially to preserve those mayhems.



also came across this badass lol.



This post has been edited by cstkl1: May 15 2014, 10:56 AM

Hmm anandtech review..

They use Glue on the mem sinks...
and its not easy to install it.

the performance wise he said was astounding.

most of the time problem with aircooling is insufficient cooling on the vrm rather than gpu side.

hence ek blocks are the best at this.


This post has been edited by cstkl1: May 15 2014, 08:55 PM

thats just what i need

buy buy buy.

btw where did u find and see this..

edit nvrmind got it

https://www.facebook.com/media/set/?set=a.6...38075035&type=1

This post has been edited by cstkl1: May 16 2014, 10:32 PM

already whatsapp vincent. no reply.

suspect as what ezzy told me just now.. because of computex.

Ure in luck

Awesome Ram, Cpu and mobo bundle in garage.. Check it out yo.

selling point.
the rams and cpu are keyed in super stable. No noobie can do this crap.
Be awed by the mobo bios settings

saw this in bi-tech like few years back.

czone still has a few afaik.

either ure proc need to be delided because of too much tim
or flow config is wrong and ure getting heat dump on ure proc
cause technically on idle, fan capability on rad will be indifferent.

This post has been edited by cstkl1: Jun 13 2014, 01:25 AM

dude really this temp at idle is to high. unless we go back to the days of i7 920...
idle my 4770k are 30s on air cooling with two fans at 800-900rpm.
thats because there is no heat to remove.

so same thing with the rad. theres no heat for the fan to work at

i only can think off flow config theres a heat dump just before ure proc. or ure overvolting ure cpu.
since ure using DDC. is it directly to ure cpu.
touch ure pump.. see how hot.

This post has been edited by cstkl1: Jun 13 2014, 02:06 AM

Thermalright Venomous Black with Two Noisblockers M12-P. Works for me till date.

but ultimately i think it really has to do with the casing. TJ11 and FT02 really helps in aircooling setups with reference card etc...

ure top rad is a 360 and bottom also 360?? ure whole flow config and understanding of heat transfer.. is the issue

take it like this watercooling

u need the highest flow and coolest water to hit ure cpu
and u need after all the blocks are done to have a coolest dead flow at the res.

so what is ure top rad doing.. its cooling just ure pump.
whats happenig in ure res.. ure go hot water in there. (unless u got a 360/480 rad at the bottom)
so what is being fed to ure pump hot water.
and ure pump is a ddc.. its warm.

although u have a better head pressure. but cpu block etc all requires coolest water with highest flow.

this is why ddc nowadays dead for multi config setups and ppl only use them for small build cpu+gpu cooling etc. ( with little bit overclock.. more for silent etc...)

This post has been edited by cstkl1: Jun 13 2014, 02:49 AM

kawan. ure using wrong rad for ure block config, and seriously wrong pump for this job.

if DDC is ure thing for this should be.

DDC to re240 rad to CPU/GPU1/GPU2 to a RX360 Push Pull to res. not a re360 and RX240...

best get two dual D5 loop config like bitspower with two res and do
D5 To CPU to RX240 to res
D5 to GPU 1/2 to ex360 to res.

u can do vice versa on the RX240 and ex360 but take note RX series require high RPM fans to actually see the benefit and re360 wont make a difference with Push Pull high flow fan.. its has a fan limit as its just a single pass radiator afaik.

Currently ure top rad is only cooling the pump and whatever thermal equilibrium etc. Its not doing much for the cpu/gpu block.
ure RX240 is doing most of the work and its not enough. In thermal equilbrium ure creating heat in the whole loop and hence y ure idle temp is high because ure pump flow is also insufficient. This is y we always place temp sensor from the res to pump. That shows the capability of ure flow/block/cooling config.

This post has been edited by cstkl1: Jun 13 2014, 02:48 AM

Thought by now u would have realized

U see a waterblock. Picture taken awesomely
only two words to google

Bundymania Facebook.
https://www.facebook.com/pages/Bundymania/467667709912606

gonna dive in and get some PETG and some primo ghost.

Lets do this. Dive back to full WC again.

btw will be ordering some fujipoly 200x150x1.5 11w/mk

Think i will be using half so the other half will sell it at garage thread for 350.


This post has been edited by cstkl1: Jul 14 2014, 05:14 PM

thats takes a lot of courage. lol. even now 80 percent of me is saying stick with tubing.

btw ure loops. i really dont know what is going on..

do u mind showing a full side view.

cause it looks like dual loop.

ok found it at ure album


hmm why so complicated?? btw that rad back to mobo.. balls of steels..
btw are u doing Pump to GPU to Rad to Mobo to CPU to Res??? is there another rad at the front like the following?


example OCN guy the other day with PETG. looks much straightforward.

http://www.overclock.net/t/1490076/petg-tu...0#post_22554608


This post has been edited by cstkl1: Jul 15 2014, 02:18 AM