That's a micro atx right.

This post has been edited by cstkl1: Feb 9 2015, 10:03 AM

hmm pass..

Got a new build with Phantek EVOLV

ah dude i am building something similar. except gonna ditch the r5g.

looking for a full cover matx x99 block+mobo. Thinking of buying gaygay gaming 5 Matx. Since not gonna oc cpu high.


This post has been edited by cstkl1: Feb 16 2015, 09:55 AM

Second rig for shadowplay streaming, n encoding.
Saw my friends 5960x encoding gain n was blown away.

Yeah want to full wc cpu+mobo+gpu.

Looking at phantek evolv or a caselab.

Sourcing cpu first.

Got afaik on ek compataible board list. Gaming 5 Matx.

Planning to ask scanart after cny. Or might as hank from PPC.
Also looking to get the 5960x from silicon lottery. Wait for restock of the 4.7.

So now just waiting for nvidia. Will either put the blacks on this or the new gc's .

This is gonna be a slow build for the year.

Casing for now kindda like the evolv

This post has been edited by cstkl1: Feb 16 2015, 05:48 PM

well i think before gst hit everyone already kena on the exchange rate.

Heck thailand/sg now everything 10-15 percent more expensive due to exchange rate.

This post has been edited by cstkl1: Feb 16 2015, 06:38 PM

hmmm..

This post has been edited by cstkl1: Mar 8 2015, 10:19 PM

Lucassss

Not sure about that bro. Been using shell battery water for quite some time n nvr had yellowish/gunk

Although i normally do a 2 full bleeds, check blocks,pump, 2 more bleed when i first install.

Arghh that time if the year again n worse for some unknown reason my cpu block stands ine was dislodged from the backplate. Did a temp fix but temps were 15c difference on load only. Suspect clp issue. So just resitting n reapplyinh clp.

6 hrs of my life gone. Lol.

No main rig is now 4 months but i changed the water just now because of the cpu issue. CLP lol dont move the block even a little for delid.

Always got some reason within a year to bleed. So never reach 1 year.

Change GC, CPU, etc..

Maintenance of the WC in my opinion is to make sure the block flow path are not hindered. So Just did the check just now by removing all blocks, cleaning each one etc.

Another thing to note WC rigs . Try not to use ceiling fan in the room. Aircond or stand/table fan.

Here is a pic after four months 24/7 use before cleaning and resetting the cpu block. ( BTW i know i need to change those two sata cables.. but to find a 90-120cm sleeved cables.. hmm will take some time.. so until i order more stuff will put that in want list)



demciflex and that no ceiling fan rule. keeps dust away. Rads had demciflex filters

This post has been edited by cstkl1: Mar 9 2015, 11:11 PM

aircond guy explain to me lol..

he said ceiling fan creates a vortex around the room that attracts new dust everytime you open the door/window

hence y they always said dont use aircond with ceiling fan.
same with wc. filters will clean off existing dust.

hence y u see mine so clean still. baby wipe 5 minutes all done. rad no dust.

This post has been edited by cstkl1: Mar 10 2015, 12:50 AM

dont think anyone can say 100% sure of anything in wc.

one thing i dread everytime. Lifting the damn thing. TJ11 was not meant to be hold. Pretty sure 900D is the same.



This post has been edited by cstkl1: Mar 10 2015, 01:00 AM

Whats ure setup??

Meant what cpu ure cooling. If its 4790k. In our weather its very hot cpu unless u delid

wow think overkill right for amd cpu only. dude go 3/8 5/8 on tubing

This post has been edited by cstkl1: Mar 11 2015, 10:34 PM

exactly hence go

3/8 5/8 easier to route etc especially a mid case. Rarely you will need angle fittings etc.

late you see how thick that hose is and its creating unnecessary pressure on fittings when you bend it and sambung.

rarely u see ppl using 1/2 3/4 nowadays. Last time it was a thing for cpu block to have " high flow design " for it. Myth.

This post has been edited by cstkl1: Mar 11 2015, 10:43 PM

yeah in mid casing.

go and see pics of ure casing with 1/2 3/4 and 3/8 5/8

always. been a advocate of this size for a long time. but nowadays trend caught on.

less usage of angle fittings.

Do a google sketchup on ure wc and how the color coordinate etc.

Cause lol pearl uv green never looks good. atleast to me.


This post has been edited by cstkl1: Mar 11 2015, 11:50 PM

Dunno how many times so call expensive bitpower fittings had leaks. Angle fittings n orings always need to double test it.

Got nearly 2-3k worth of bits fittings . It was that experience that led me to a sabatical from wc.

Suprisingly smooth sailing with monsoon so far

This post has been edited by cstkl1: Mar 12 2015, 05:02 PM