ORthos

This post has been edited by yehlai: Oct 29 2006, 02:48 AM

DDR3 compatble with current setup??

My cvs also have brown dot at the corner... they said better because its 'micron'chip. But oc only can reach 860Mhz, and tht chip dont take +0.3 vDimm one. Cant reboot. No respond at all dead fish

This post has been edited by yehlai: Oct 29 2006, 01:04 PM

mobo GA 965P-S3..
@860MHz timing is 5-7-7-20.. so loose.
my OC bottleneck by this RAM so far only can reach 435x7 cant reach 440x7

This post has been edited by yehlai: Oct 29 2006, 01:49 PM

so wht... ppl with KVR 533 pity us also
lucky i only bought 1 stick... so many ppl go mjoe now.. abandon cvs..

Guys should i lock my PCI-E during OC ?? Can tell me why should i lock it pls..
How much should i lock it then...
THANKS

Need some help here guys
i found tht my lousy cvs can reach 990MHz.. with 3x multiplier. (2.31GHz @330FSBx7).
But when i tried 440x2 multiplier (3.08MHz@ 440FSBx7) during OC cant reboot. Can any OC pros tell me why?
* +0.2 vDimm, vCore, vFSB, vMcH@ stock*
\Tried +0.5 vDimm and 1.45 vCore b4 but failed\

My OC bottleneck by ths RAM??

2nd question.. how much PCI-e should i lock during OC? (i never lock it b4 during OC)

THANKS


This post has been edited by yehlai: Oct 31 2006, 02:19 PM

thank you gengstapo & mikelanding
i saw mjoe's RAM was using D9 chips also.. anyone here ordered tht RAM??
Can share some OC result please...

This post has been edited by yehlai: Oct 31 2006, 06:52 PM

Guys Advance modules RAm and Samsung RAM is good ??
i dont know too much about RAM.. can someone tell me pls. THANKS

This post has been edited by yehlai: Oct 31 2006, 07:58 PM

waoh.. can support any OC la ur RAM..
i P.Med M.J ledi... seems like still dont have stock..
got one insane person kacau his thread lolz..

Now i dunno wanna buy KVR 512Mb 533 (rm 165) or Mjoe's super RAm ledi..


This post has been edited by yehlai: Nov 1 2006, 01:27 PM

Thanks i ordered from Mjoe ledi.

This post has been edited by yehlai: Nov 1 2006, 08:45 PM

Mine 3.01Ghz @stock vCore..
2.800Ghz 1.275 vCore only.. pass stress tests.
i alwayz try lower vCore for lower the temp..
found tht by lower .025 vCore my proc's temp will decrease 1-2C.. runnig 2.8Ghz core temp are about 54-55C

This post has been edited by yehlai: Nov 2 2006, 12:04 PM

wao.. so many ppl ordered CRUCIAL PC5300 2GB KIT..
after test it share some screenies with us ya ..
rich la u guys

This post has been edited by yehlai: Nov 2 2006, 08:34 PM

Micron D9-Gmh and Micron D9-Gkx performance almost same??

//OFF TOPIC//
Guys HELP please..

mine 1.275 vCore stable at 2.8GHz.
running cool 24/7. 53-54C. idle

But cant lower vCore to 1.25v... failed prime within 5minutes

how to make the timing tighter?? need to increace how much vDimm??
Wht is the stock vDimm for e6300? all c2D vDimm are same??
Thanks.
I ordered this RAM ledi, but post laju off for 1st satuday. need to wait till monday...

This post has been edited by yehlai: Nov 4 2006, 09:45 PM

yes thanks .. but i dunno the default vDimm for GA965ps3.. i think its same with DS3 maybe..
I just put +0.2v when OC. Can anyone tell me their default vDimm please.
THanks.

This post has been edited by yehlai: Nov 4 2006, 10:04 PM

How u make it become CL 4??
@ stock is CL 5... Are u +0.6v for vDimm??
can teach me please?? mine is 5-6-6-20 @900+Mhz

This post has been edited by yehlai: Nov 7 2006, 12:14 PM

Where to set timing?? i only +0.5 vDimm. @1050Mhz.. lanterncy is too loose.
How to adjust the timing please...

coolice i tweak in M.I.t also.. bot i dint see the RAM timing adjust thing.
can teach me please.. Nvm i go back try it 1st then i tell u.. Thanks

This post has been edited by yehlai: Nov 8 2006, 10:26 AM