hg front or rear usually cost RM40-50 per pc.

frp car, no usually they use large.

apa side?

MS manada side

You would want sprint dash motor instead of power dash, or else those MS chassis with mach dash pro and tayar sotong would easily tapau your car.
Some weight reduction would help too, like using polycarbonate cover and skip the reinforcing plate on the liberty emperor.

An easy recipe for S2 for speed ....

- 830 front
- 830 rear top, 620 rear bottom
- 620 wheel bearings all around
- sprint dash
- 3.5:1 gear ratio
- reinforce front bumper by using Super X rear FRP plate as underguard

For HG plates, use at least the 2mm ones (HG Carbon for AR chassis front and rear set). Remove the stock plastic rear stay. 1.5mm HG could break or bend at high speeds especially when approaching corners.
For the front make sure you have at least 2 degrees angle adjustment or else your car will fly at high speed corners.
All bearings must be as smooth as f**k and able to spin freely without hesitant. Make sure the rear rollers are straight, parallel to ground surface and does not tilt backward, not even a little bit.

The rest is up to your skill in tuning the motor.

* tilt backward = recipe for disaster

read it again

lol 3.7v 

Lets say.... MA chassis is a b****! Is hard to setup for Semi Speed.... But I'm seeing the good side of the MA chassis...

My setup of MA chassis is almost the finishing setup of able to run semi speed.

MA Chassis is stronger than MS chassis and easy to maintain (gearing).

MA chassis is heavier than MS Chassis does.

takde nama. people call it KJMC Kelana Jaya Mini Centre.
no signboard no nothing.

ordered and confirmed all 2014 already ;P
any idea what color will it be for the box?
ehem (vs red reinforce) sudah tau harga? hehe
kelabu taik kuda takde. screw tanam warna kelabu ada. mau?
i no sifu. i nub.
bearing will be bigger or wider than original and theres no plastic cover.
as for the FRP. i yet to master coz i dont bother. haha
no need to breakin battery la.
everything wana breakin. later ur car break how?

abam, sabtu (speed) ahad (semi) funrace di KJ.
mari mari
ini khamis jgn lupa. aku rasa trim biasa je la.
apa yang penting, frp itu. mau test on saturday/sunday   

I don't think I can give the truest definition of frp car.

17 seconds camne nak lawan.

frp angle? slalu org adjust roller angle..

dua-dua pun ada.

FRP angle adjuster = both rollers will have the same angle
Roller angle adjuster = you can have both at the same angle, or different.

always tilt to the front.

tilting the angle to the back will cause your mini4wd to fly off the track at every high speed corner