officially am2 owner now...(low budget one...)
will join this OC clan after getting new PSU next month..currently using 300w cap ayam PSU..
and off course after "khatam" the OC guide pinned thread..

here is my current screeny..

eh, just realize..mine default just 1.232..it's ok or not enough power??

btw got 2nd hand AcBel 450w from silverbolt..(nice seller there), trying oc my 3000+ a bit last night and able to get 2250 from 1808 default..
pass 8 hour prime torture test, but then system become unstable after restart..
it's only happend after i restart it..before restart it's seem ok and pass prime..why??:confused:

guys need help here..
playing around with OC feature in M2N-E bios last night,
changing multiplier to 8x and set ram timing to 5-5-5-12 n T1..
with 220 frequency..
then it wont reboot..and nothing shown on the monitor..just blank..
and warning beep keep beeping..

how to set it back to default...?

just reset the jumper and pull out the battery only..
then all back to default setting??

ok..done..TQ 7/11..

This post has been edited by mr_habuk: Dec 29 2006, 03:50 PM

mine able to hit stable at 2250 yesterday..maybe can go more kot.. but scare edi i think..better stay with this point first..

bios setting currently
HTT...250
Multiplier..x9
Vcore......1.500
Vdimm.....1.95
timing.......5-5-5-12 (T2)---->>guys may i know what is the different between 1T & 2T
frequency..450.0 mhz

no error priming for 24 hour...and get 34m 16.672s at 32m pi calculate..(but still away far from u guys)..
wanna show u guys print screen pic. but till today i still can't access photobucket...

This post has been edited by mr_habuk: Jan 5 2007, 04:45 PM

photobucket is back..show u yesterday screenie..



BTW..allenutra..can that timing works with mine too??
using M2N-E with DDR 800..

edited: wrong picture...

This post has been edited by mr_habuk: Jan 6 2007, 10:41 AM

8tvt..ur still using M2N-E right??
don't think to change that mobo..??
poor 1.95vdimm really holding my ddr2 800..
coz 800 using minimum vdimm 1.95..

been thinking to change to 570infinty..
coz nF ultra II-m2 don't support 800..isit right??

are u sure coz i get this from dfi website..

System Memory
Four 240-pin DDR2 DIMM sockets
Supports DDR2 533 and DDR2 667 DIMMs
Supports dual channel (128-bit wide) memory interface
Supports up to 4GB system memory


so en. soulfly..is this recomended??

[quote=Jealousy,Jan 11 2007, 03:14 PM]
[quote=soulfly,Jan 11 2007, 12:23 PM]
TTBT will block the first slot nearest to the cpu socket. Get the Zalman instead.... or Arctic Freezer/Coolermaster HyperTX

ok thank soufly, so wat hsf u using for ur dfi system? how was the performance overall...

[/quote]

dude, why don't u just grab mr. soulfly punya CM hyperTX...

hmm..i guess better for me to change to X2 then changing new mobo..is it??

haha..if that true, u should change ur TX price..bro..

i guess people edi bought it before NF 570 release...

btw, where did u get those pricing??
nice price there...

nice vey99...did u play with the ram..or just increas the FSB..

migrating to X2 3800+ edi..hope can oc more this time...but M2N-E might still holding me..
anybody can teach me how to tweak DDR2 800..??
that might increase something i guess....

it's EM2...

btw..playing with this new proc last night...seem it's hard to reach more than 2.3..
even at 2.25 it's cannot finish the pi 32M..why arr..

yeah..edi set the htt to 4x but ram directly 800 with 1.95v
running on 5.0-5-5-12..that is stock for mushkin..
cpu at 1.350...smooth at 2.200..
but when i've increase the fsb to 225, but it's stuck at window logo..
why arr??

thanks guys...and sorry for the wrong info..
btw..i did do it with 3x n 4x htt last night..but as i say it's only boot at fsb 220..
more than that it's stuck at windows logo...

so..with ur advice, i've drop the ram speed at 667 n htt 4x..and able to get this..



might try more tonight..see how high it's can go..TQ guys..

are u sure..coz i've stuck at 245 edi...
any opinion on best timing i get with this..
8tvt..dude can u give me ur setting on advanced ram setting..
coz i just left it there with auto only..or just leave it with auto only??

btw got ate pricing last week punya..
fatility is rm695..

update...



vcore at 1.475v..
running at 667-->833 at vdimm 1.85v...timing 5-5-5-12-24 at 2T..

yup..i noticed that..but currently setting on 667 then able push the fsb to 250..but if i'm using ddr 800..with max vdimm...it wont booth even at fsb 225...
and for now it's stable at 5 hour priming...(using orthos off couse.)

btw..actually i'm still noob in oc..so am i doing the right thing here..???