somethings more weird  
i oced to 2.5ghz like my post above..but then,looks the attachments below;

[attachmentid=189373]

anyone can help me??
it seems like my clock and vcore playing with me already...

Tomolo Buy AM2 Mobo...

Any Suggestion? Mostly Is NF570...Which Brand?

Thinking To Grab DFI, But Seldom PPL Take DFI Nf570

last time was 2.5ghz ddr1000..but no time to stress it..so i downclocked it back to normal..

now busy with assigments and programming works..so dun really hav time to seriously oc..

i got a question guyz..with 2.5ghz 1.488 vcore and ddr1000 2.1vdimm,i can say that my rig is quite stable even not doing the prime95 or sp2004(becoz no time), considering that no bsod or restart/hang/crash when in full load..

but sometimes(not everytime) it turned out to be cold/warm boot when i switch on my pc..example when i switch on my pc on the morning it will shows blank screen on the monitor..but this situation didnt appear when i restart my pc..only when boot after shut down..

can help me?

Tforce570U (since david mentioned that it provides up to 2.4V DRAM voltage)

@mr_habuk

do u plan to change mainboard without reinstall windows XP?

Use sysprep utility will lighten the workload

go for nf590 la..

No hesitation! Go just buy!

hehhe beli je...anyway its a nice board..

Much better than m2ne. No more cold boot problem and a couple of issues regarding starting up my system when im O/C. More than 1.95v dram. And umm donno la maybe because i paid more so i feel its better

remove the cmos battery as well

remove the cmos battery as well

Is it your ram plug into to the nearest ram slot near to cpu? It happened to me that i plug to slot3 and slot4, it limits my computer oc abilities.
-pWs-

Mine still ok never encounter that problem. What program can do burn in as sandra?

Already updated to KN918, btw i manage to warm boot at 283mhz HTT at 1.575v 
btw, do i nid to pump up the MCP55 and HTT Voltage?

only Laparty series got build in memtest86
infinity dun have

hey guys

im at 255 fsb now with my x2 3600+...problem is my ram divider is at 400....if i go higher it wont even go to the bios, and there will b 1 long beep and 2 short beeps...i tried to set my multiplier lower and fsb higher, also cannot..y ar? not enough vdim? its at 1.95v (board max)

thanks!!

maybe differences in Trtp? Trc? Twr? Trrd? TrwTO? Twtr? Twrrd? Twrwr? Trdrd? Tref? Queue Bypass Max? Max Async Latency? Idle Cycle Limit? Trfc?

all these changes when you use different divider, and they affect the memory controller and ram. memory timing is not only 5-5-5-15-2T...

not only ur ram..ur gc oso must change to pci-e if ur pc b4 dis using agp slot...i'm newbie in amd section...juz throw out my old p4 system to new AM2 sytsem...dis became my baby rig...lost to much money bought dis new system...    

---

Added on March 5, 2007, 6:25 amsoulfy update my rig on ur 1st post..

3800+ X2 Windsor F2 | tapirus | ABIT KN9-SLI-AM2 | A-data DDR-667 | stock AMD cooler

dis my Super PI 32M