just got my brisbane and my 1st round results..
2.945 ghz....1.35 vcore...
This post has been edited by treason: Apr 25 2007, 02:08 AM
AMDŽ Socket-AM2 Overclocking thread, discuss our setup/overclocking issues
|
|
 Apr 25 2007, 01:55 AM
Return to original view | Post
#21
|
 
Junior Member
190 posts Joined: Aug 2006 
|
hey guys
just got my brisbane and my 1st round results.. 2.945 ghz....1.35 vcore... This post has been edited by treason: Apr 25 2007, 02:08 AM |
Quote|
|
|
|
|
Apr 25 2007, 02:14 AM
Return to original view | Post
#22
|
|
Junior Member
190 posts Joined: Aug 2006
|
QUOTE(Asus @ Apr 25 2007, 02:10 AM) treason, ur vdimm is at what voltage and at which slot u put ur ram on the 570u mobo? the orange slot or green slot... its at 2.1v and at the orange slots...from my past experience the ram slots do affect the overclockability...i dunno whether its a coincidence or if theres really a reason for that...my asus m2n-e and now my biostar also same..... |
|
|
Apr 25 2007, 11:02 AM
Return to original view | Post
#23
|
|
Junior Member
190 posts Joined: Aug 2006
|
QUOTE(Enigmatic @ Apr 25 2007, 09:47 AM) Aiyark go do some prime95 ma. haha yeah have to prime abit to gauge the stability..hehe dun think its stable enough yet though...this morning it rebooted by itself after about 8 hours..so i pumped vcore up to 1.375...see howlar.. Nice results there.  I have to use around 1.425v for that. I THINK. Can't determine cause my brisby gets real hot. Need a better cooler soon.By the way I am cooking my rams now instead. 5-5-5-12-17 at 1100mhz.  1100mhz sounds great though hehe whats the vdimm?By the way PWS whats ure current vcore r? |
|
|
Apr 25 2007, 11:45 AM
Return to original view | Post
#24
|
|
Junior Member
190 posts Joined: Aug 2006
|
sure asus, will check it out for u when i get home..i did update it though recently....can u adjust ure pcie frequency in bios? coz i could not with my previous bios..
|
|
|
Apr 26 2007, 01:35 PM
Return to original view | Post
#25
|
|
Junior Member
190 posts Joined: Aug 2006
|
Minor update...official member of the 3.0ghz brisbane group! haha
at 1.40 vcore though but seems very stable now...ram timings also abit looser than i'd like..will try to tweak it more when i can...brisbane is great! super pi was done while i was watching a video and all though..so might b a little slower lol  This post has been edited by treason: Apr 26 2007, 01:39 PM |
|
|
Apr 26 2007, 01:41 PM
Return to original view | Post
#26
|
|
Junior Member
190 posts Joined: Aug 2006
|
ok ok..will update the screenshot later and post one with everything else closed.hehe...still need to change ram to get the most out of it though...seems like a shame to not do 1000 ghz with brisbane lol
|
|
|
|
|
|
Apr 26 2007, 06:57 PM
Return to original view | Post
#27
|
|
Junior Member
190 posts Joined: Aug 2006
|
sempronic,
wow! very impressive! welcome to the 3ghz club! lol!  how much vcore is that though? |
|
|
May 8 2007, 04:12 PM
Return to original view | Post
#28
|
|
Junior Member
190 posts Joined: Aug 2006
|
QUOTE(kalakatu @ May 8 2007, 12:16 PM) i dunno how should i say this, but i think its quite dangerous when we set the vdimm jumper to 2.4v.. yah..one thing i realized is really silly bout our board is that it cant go between 2.1v and 2.4v ..id rather have the 2.2v jumper one lar if i knew....now i wanna buy the crucial ballistix also have to think twice..coz the rated voltage is 2.2v ... i saw my vdimm was 2.48v on the posthardware..lucky.. then i changed back to the normal jumper place.. and currently my crucial can go around ddr800 (divider 667) with unchanged vdimm.. now my target is, oc until the highest 1T can make..   should have bought dfi |
|
|
May 8 2007, 04:48 PM
Return to original view | Post
#29
|
|
Junior Member
190 posts Joined: Aug 2006
|
QUOTE(lohwenli @ May 8 2007, 04:28 PM) Well just to put things into perpective, those system monitoring chips are pretty off target. I've measured a few boards with a DMM and most of the system health readings are off target by a fair bit. So you don't know how accurate is the reading anyway. haha yeah and considering that the rams would be right under my tt big typhoons fan..i just might do that.....would it work at 2.1v in theory though? ive seen most reviewers say that it would at close to stock speeds but 1 or 2 have said that it wouldnt b stable...anyway..already ordered the pc6400 tracers 2x 1 gb kit..so FYI, most crucial ram (micron actually) have a max rating of 2.2v according to datasheets. But hell, if you feel extreme you might just say 'screw the datasheets'...  which most overclockers are already doing without realising it, particularly for processors.  hope for the bestlar..hahaha |
|
|
May 13 2007, 06:47 PM
Return to original view | Post
#30
|
|
Junior Member
190 posts Joined: Aug 2006
|
QUOTE(jy14 @ May 13 2007, 06:46 PM) Ur everest reports the temp still near 0C ? Mine is around 2-3 b4 OC. for brisbane im using the biostars t-utility software to gauge the temps...seems oklar(30+) ..the rest like speedfan, coretemp, everest..all cannot at all..like 10-15 wan lol..... ehehehe, i'm abit outdated on this thread, will read back to see if u guys found any solution to it yet or not. So far, the AMD X2 is very stable now, will try to OC soon. So, i should use CPU-Z(Specs), Super Pi 1M(for memory), Everest(for temps) and wat else I should use to ensure that the OC is successful ? I'm kinda noob with memtest or prime. Can let me know wat's the name of the software and version, so that I'll go check on google lo. hehe Thanks to all the help offered. |
|
|
May 15 2007, 05:35 PM
Return to original view | Post
#31
|
|
Junior Member
190 posts Joined: Aug 2006
|
yeah with brisbane i realized after about 2.95 u need quite abit more voltage to go higher than 3....so im sticking to 2.9 something for daily use too...the vcore quite alot of difference...
|
|
|
May 21 2007, 09:36 AM
Return to original view | Post
#32
|
|
Junior Member
190 posts Joined: Aug 2006
|
 This is my latest super pi after changing to my new rams...crucial ballistix pc5300 2gb kit, running at 2.1v (2.2 v is recommended voltage) and @ ddr1000 need a board that can go more than 2.1v lar haha |
|
|
May 21 2007, 12:41 PM
Return to original view | Post
#33
|
|
Junior Member
190 posts Joined: Aug 2006
|
QUOTE(jy14 @ May 21 2007, 12:19 PM) Nice results. The D9 on the Ballistix is really awesome man. Can change any jumper to get more than 2.1V ? cant understand y biostar did that..i bought the board last time thinking that the bios vdimm adjustment goes up to 2.3v...otherwise would have gone for dfi instead...  mfa333, 2.5ghz on stock cooler shouldnt b a problem for brisbane as it can do 2.5ghz at close to stock v core... |
|
|
|
|
|
May 24 2007, 05:17 PM
Return to original view | Post
#34
|
|
Junior Member
190 posts Joined: Aug 2006
|
QUOTE(mfa333 @ May 24 2007, 02:56 PM) ok... to reach 2.8ghz u probably have to lower the divider of ure rams if u r not using d9slets say i'm using Brisbane.. do i need good ram chipset like DG9MP(iinm) to reach that speed or Hynix FP-5Y(iinm) is good enough? |
|
|
May 25 2007, 01:08 AM
Return to original view | Post
#35
|
|
Junior Member
190 posts Joined: Aug 2006
|
|
|
|
May 28 2007, 06:22 PM
Return to original view | Post
#36
|
|
Junior Member
190 posts Joined: Aug 2006
|
QUOTE(pali303 @ May 28 2007, 03:53 PM) Brisbane 3600+ with stock hsf + Biostar Tforce 570 SLi reporting in... bro,wats the max vdimm for this board via bios r? hehe thanks! |
|
|
May 29 2007, 01:53 AM
Return to original view | Post
#37
|
|
Junior Member
190 posts Joined: Aug 2006
|
QUOTE(Vtec(Rock) @ May 29 2007, 01:38 AM) Brisbane 3600+ with stock hsf + Biostar TA690G+Acbel Iplus 550W SLI+kingmax 2x512 DDR2 800Mhz reporting in... for me its 1.35 v for 2.9v...stable with no issues so far...back to Oc world.hope all menber wellcome me back  post up my result soon.gonna clock with sotkc hitsink.hope can break 2.9ghz.3Ghz my target with better cooling system.hehehehe...normal how high vcore ur guy to use to break 2.9Ghz.need some info hereThis post has been edited by treason: May 29 2007, 01:53 AM |
|
Topic ClosedOptions
|
| Change to: |  0.0554sec
 0.36
 7 queries
 GZIP Disabled
Time is now: 11th December 2025 - 01:01 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.