AMDŽ Socket-AM2 Overclocking thread, discuss our setup/overclocking issues
|
|
 Apr 27 2007, 11:46 AM
Return to original view | Post
#121
|
 
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6  
|
QUOTE(CV6149 @ Apr 27 2007, 11:45 AM) hahah i thought sooo... Can be used...but the Agena core is using AM2+...so the full potential can not be released by this board .. doesn anyone can confirm whether DFI Infinity nF Ultra II-M2 like pws mainboard confirm can be use with Agena??thinking hard to change mobo..   -pWs- |
|
|
|
|
|
Apr 27 2007, 05:45 PM
Return to original view | Post
#122
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(byfc2010 @ Apr 27 2007, 03:25 PM) yea lor... Wow...that is freaking high.cauz ram alr set to ddr400... then oni left either mobo or proc lor... bt dun wan try liao lar... 2.8Ghz my temp on idle alr 51C... on full mar at least 70C...  If i din remember wrongly, 72 is the max safety temperature for amd proc  -pWs- This post has been edited by -pWs-: Apr 27 2007, 05:46 PM |
|
|
Apr 29 2007, 12:04 PM
Return to original view | Post
#123
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
Mayb ur rig too cold...need extra voltage to warm up
 Weird ... ermmm If default clock speed with default vcore, can boot? -pWs- This post has been edited by -pWs-: Apr 29 2007, 12:22 PM |
|
|
Apr 30 2007, 06:35 AM
Return to original view | Post
#124
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(serez @ Apr 30 2007, 05:50 AM) late oCed from me Yea..nice  subuh edi. wanna perform prayer   Try to oc somemore -pWs- |
|
|
Apr 30 2007, 07:19 AM
Return to original view | Post
#125
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(serez @ Apr 30 2007, 07:00 AM) haiya~!! u woke up so early aa today IMO, your system still not stable yet ... Try to downclock a bit hmm i have something that was confusing me. why my system suddenly shuts down? is it too hot or what?-pWs- |
|
|
Apr 30 2007, 01:45 PM
Return to original view | Post
#126
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(serez @ Apr 30 2007, 07:00 AM) haiya~!! u woke up so early aa today I also experienced it b4 once. But i dun care it... I just open again my computer with the same setting... hmm i have something that was confusing me. why my system suddenly shuts down? is it too hot or what?Maybe really as Amedion said, ghost shutdown our computer   -pWs- This post has been edited by -pWs-: Apr 30 2007, 01:46 PM |
|
|
|
|
|
Apr 30 2007, 04:34 PM
Return to original view | Post
#127
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(bryanyeo87 @ Apr 30 2007, 04:05 PM) coz budget mar...no $$ to buy a good heatsink or good watercooling atm...js bidded for an dangerden block from ebay, so hopefully can use wc w/o fan(stick radiator in front of air con Good idea... better than having fan blow on it... )Then, u can oc ur proc all the way regardless of how much vcore u pump -pWs- |
|
|
May 1 2007, 11:46 AM
Return to original view | Post
#128
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
For brisbane user, there is a reason why we getting low temp on it...Not sure whether it is true o not...
QUOTE AMD reported that the DTS in Brisbane is broken. Here the links i refer to. http://www.alcpu.com/forums/viewtopic.php?...db4d8f1b5899b60 http://www.xtremesystems.org/forums/showthread.php?p=2152881 -pWs- This post has been edited by -pWs-: May 1 2007, 12:38 PM |
|
|
May 7 2007, 12:52 AM
Return to original view | Post
#129
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(normeck @ May 7 2007, 12:50 AM) i see other thread says.. Yea...u can just oc the proc. Use lower divider and ensure the timing and speed do not exceed the SPD value can overclock to 2.5 to 2.7 with stock HSF..for windsor proc.. is that means the voltage will be higher? and the temp will be 50 - 60c? cause my biostar can go till 2.6Ghz...with stock HSF...but the temp will be around 50c to 60c.... any suggestion? im using value ram... can i just oc the proc only.....? -pWs- |
|
|
May 11 2007, 05:13 PM
Return to original view | Post
#130
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
|
|
|
May 12 2007, 10:49 PM
Return to original view | Post
#131
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(TerryZeroX @ May 12 2007, 11:31 AM) hmmm i noticed one thing, your cpu-z shows ur vcore at 1.2xx? If i am not mistaken, CPU-z cant report the correct vcore if exceed certain vcore -pWs- |
|
|
May 13 2007, 09:13 AM
Return to original view | Post
#132
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(jy14 @ May 13 2007, 02:51 AM) Nice result there. Is that stable result ? Everest will do Oh, another thing is, mind to tell me about that soft ware that u using to show the temp and measurement of the voltages ? Kinda noob in software side. Thanks in advance.  -pWs- |
|
|
May 14 2007, 01:05 AM
Return to original view | Post
#133
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
The timing wont increase...You better manual set the timing.
When HTT increase, only memory frequency, clock speed and HT link will increase. -pWs- |
|
|
|
|
|
May 14 2007, 01:11 AM
Return to original view | Post
#134
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
O..I see. Damn sleepy now...Misunderstood d
Btw, take your time to test the bios. I am busy of my final exam also -pWs- |
|
|
May 14 2007, 02:05 PM
Return to original view | Post
#135
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(8tvt @ May 14 2007, 10:41 AM) my brisbane can even boot up @ 1.v.. How much ur vcore at 2.973GHz?? And what ur OPN code??1.1v default can set till 230fsb... that's on my M2N-E.. tried 285fsb with 1.26.. but the thing is.. my new TA690G mobo set startup voltage @ 1.225... and lowest ddr option is 1.95v.. so no EE option... lol... set to 270fsb easily... now guys.. come to look new ATI mobo chipset.. load with default bios.. -pWs- |
|
|
May 15 2007, 01:16 PM
Return to original view | Post
#136
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
That is insane O_o
HTT supported is 600 and vcore nearly 2v  @8tvt... use lower multiplier and use 600HTT, see will explode or not Jk Jk-pWs- |
|
|
May 15 2007, 08:33 PM
Return to original view | Post
#137
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(8tvt @ May 15 2007, 03:24 PM) from my observation.. the brisbane dislike over voltage.. so i tried the lowest possible voltage to get higher mhz.. with 1.33v can reach 2.9ghz now.. only my ram holding me back.. loose ram timing also no use... so keep it tight.. 2.9Ghz at 1.33v?? stable?My brisbane need 1.4v to reach 2.945Ghz  -pWs- |
|
|
May 16 2007, 06:34 PM
Return to original view | Post
#138
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(8tvt @ May 16 2007, 10:19 AM) after sometimes... drop the cpu voltage.. I think u got a nice batch of 3600. Hehe at first my brisbane cannot go beyond 2.7.. i thought 1.3v is not enough.. i tried until 1.45 also never use.. then i try to start from 1.25 back and it's stable.. then i increase the fsb step by step to reach higher speed...  So what speed now? And what the vdimm for ur ram? Is it micron d9?? -pWs- |
|
|
May 18 2007, 03:38 AM
Return to original view | Post
#139
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(guckks @ May 17 2007, 04:52 PM) my rig 5200++, mobo m59sli-s5 Maybe update to the new bios will help the prob is i cant change the multiplier for my proc. can anyone help me Last time, m55sli-s4 appears to have htlink multiplier problem. QUOTE(soulfly @ May 17 2007, 08:02 PM)   -pWs- |
|
|
May 18 2007, 03:37 PM
Return to original view | Post
#140
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(soulfly @ May 18 2007, 10:44 AM) that setting was done on BIOS. i just tweaked drive strength and dqs delay thru Systool. What is drive strength and dqs delay for? What is the recommended setting for those??-pWs- |
|
Topic ClosedOptions
|
| Change to: |  0.0490sec
 0.48
 7 queries
 GZIP Disabled
Time is now: 11th December 2025 - 08:22 AM |
Quote