Noted, will you guys be open during Thaipusam?

Has anyone ever used Senz Invinsivle Kitchen Hood before? How is the performance in terms of its ability to extract oil from air/smoke? I could not find this information anywhere. 😅

Also, any suggestion of a reliable 2B gas hob that’s priced under RM500 with acceptable KW (5.0>) and equipped with safety features?

yes open

Hi any recommendation for hood less than 700mm?

Hi all, my house is currently towards the end of renovation and thinking of doing a kitchen backsplash (using tiles, green in picture).

Selected Fujioh FR-LW2490 V (L-shape hood) for the kitchen.

Wanted to get your opinion which backsplash configuration is better?


Configuration 1:
Cutting backsplash and cater to the hood. So this way the hood will be flat with the wall









Configuration 2:
Laying half body of the hood over the kitchen backsplash. Green repesents the tiles for kitchen backsplash, so this case the hood will have slightly protruding out from wall (5mm)



This post has been edited by tritritri: Mar 13 2025, 03:12 PM

if for my case, i go for option 2

so protruding out from wall about 5mm is ok?

I'm imagining side view is something like that? (maybe exaggerated slightly over here..)

Hi. I need some advice. Pls anyone can help?

I have ready 6" hole in my kitchen (kept since last renovation). Now looking to install the kitchen hood. But in the market the recent one mostly come with 7" hose.

I am a bit concern to rebore the hole to 7", due to the possible dost and cost incurred of course.

I heard salesman said 7" to 6" better use AC motor hood instead of DC motor hood. Is that true???

If i plan to use reducer (from 7" to 6"), should i install the reducer in the hood outlet (use 6" hose" straight to the hole) or install at the hole (Use 7" hose from hood and reduce to 6" near the hole)? Which one is recommended?

Pls help me..Try to google info also can not get.


*Plan to buy 2800m3/hr hood.

**Total hose route is about 190cm in L shape.

This post has been edited by sitizak: Mar 19 2025, 09:47 AM

@zheilwane , im looking for hood and hob.. budget around 4k combined. Any recommendation? Im from Penang but I travel frequent to KL.. if can transport back i dont mind for the price difference

Which hood has suction 2800m3/hr?

The latest by rubine sales person say is Arezzo with 2300m3. Other brand he say didn't have so power.

I am planning to get a hood too. Elba is cheaper with 2200m3.

This post has been edited by kopiride: May 26 2025, 08:34 AM

usually installer add plywood behind the bracket, so the hood will b straight but, there will b gap behind of the hood

nothing to do with AC or DC, stronger suction power hood requires 7" so less noise, if u dont mind a little more noise then just connect to 6", if u wan perfect jus ask them hack the hole bigger no need a perfect circle, after install cant c

hello guys, looking for recommendations for hood and hob with max 4k budget. Was thinking of fujioh LW2490 but my condo only allows recirculation hood most likely

Dear all, looking for recommendation on kitchen hob and hood for double storey house. My wife prefers electrical hob and chimney hood design. We dont cook everyday, only once per week.

Looking for either Robam and Fotile, given both brands are common brands and high sales volume

Thanks in advance

edited

This post has been edited by MasBoleh!: Jul 5 2025, 02:32 AM

edited

This post has been edited by MasBoleh!: Jul 5 2025, 02:32 AM

edited

This post has been edited by MasBoleh!: Jul 5 2025, 02:31 AM

Want to ask, my hob hole cut out if 660x430.
The new hob recommended 630x330 cutout. But the hob size is 750x440.
Should be ok right? can still cover the hole although doesnt meet the recommended size

I would want to have the hood flat on the wall. My Fujioh is something like FR-SC2090 R/V (older model).

The hood is wedged between upper kitchen cabinet. I'm not using tile for backsplash because I think it is hard to maintain white or colored caulk between tiles (unless it is black)

anyone got experience with Fotile ZMG9056? planning to get this model.

thank you.