Hello i have a question, anyone using Daikin Inverter and facing problem with the mother board which located at the Compressor unit? ( outdoor unit ) ?

and the replacement for that could cost around RM400 or more?
i went to 2 electrical shop one recommended daikin and another on recommended york

im not trying to compare the brand,

basically the main concern is either i choose York non inverter unit or Daikin with inverter, is about the main board unit will it spoilt easily ?

or any user facing this problem before?
SHOP A

Daikin 1 HP with inverter RM1500 with Installation
York 1HP non inverter RM980 with Installation
Shop A only a dealer which they will forward the installation to their sub-con
SHOP B

York 1HP non inverter RM1100 with installation
Shop B only sell York , Fujitsu and Mitsubishi
they is dealer and installer as well

FYI i will install in my Bedroom which is 11 x 11 feet...


thanks in advance for the information and reply

Hello i have a question, anyone using Daikin Inverter and facing problem with the mother board which located at the Compressor unit? ( outdoor unit ) ?

and the replacement for that could cost around RM400 or more?
i went to 2 electrical shop one recommended daikin and another on recommended york

im not trying to compare the brand,

basically the main concern is either i choose York non inverter unit or Daikin with inverter, is about the main board unit will it spoilt easily ?

or any user facing this problem before?
SHOP A

Daikin 1 HP with inverter RM1500 with Installation
York 1HP non inverter RM980 with Installation
Shop A only a dealer which they will forward the installation to their sub-con
SHOP B

York 1HP non inverter RM1100 with installation
Shop B only sell York , Fujitsu and Mitsubishi
they is dealer and installer as well

FYI i will install in my Bedroom which is 11 x 11 feet...


thanks in advance for the information and reply

Kim Sim,

i appreciate your recommendation, but i wont go for york inverter, do answer my question regarding the PCB board 1st can? ( no offense ) =)

if inverter i would choose daikin over york...

Where you buy the additional filter?it wont effect the air blow?

Kiding,
thanks for the reply, did u asked before how much is the PCB for Mitsubishi inverter?
KimSim,
thanks for your feed back, somehow, you recommended me Mitsubishi due to easy cleaning which i can perform myself am i right?

ok if daikin give alot of problem, i would leave it behind, talk about york , the shop told me york dont have inverter they just took other brand inverter and change the branding to York only...

through both of you feed back, i would only consider Mitsubishi Inverter and York Non inverter then... problem now the price for 1 HP is how much?
mind to share? roughly?

thanks

So you are generalizing that everything made in China are bad?
If you are so anti China made products, make sure you don't use any of them.
Just to let you know, made in Malaysia stuffs some time are worst than made in China stuffs.

sorry kim sim mind to circle or point where is the rubber part? from that picture?
i see thanks for your feed back, u replace the PCB or change new air cond ?

oh... so far the inverter type of air cond u using for how long already? 1 year?

so many people told me this!!!!
my mum already say....york cooling king. lol i pitam when she sang the advertisement song.

old and trusted brand i supposed.

any york hater here. i wanna collect more opinions.

also depends on the the electric ler. not everyone has/ intend to change to 3 phase.

I still prefer National if possible, but sadly, changed name already, haha.
Mine are Panasonic 2HP while my neighbour York 2HP. No doubt it does have a bigger outdoor unit, but I always turn off faster than his. Not to mention the noise generated by his outdoor unit.

Then it is no good and York better? I just need to you to say : made in China stuffs are not good, don't buy from them.
But each time you chicken out and ask me to go round the garden.
Stop generalizing as I repeatedly said.

As said, don't be a chicken and ask others to go round the garden.
First statement say a brand is no good as it is made in China, when people ask why, you say nothing. This is not sensitive as you said. I need clarification. But till now you can't clarify.  

Is this called argument? I doubt so. You said made in China stuffs no good? Fact and figures where? And you are a chinese? Come on man, don't be a racist *******.
But this world less you 1 will not be less, since you don't come out such no ground statement, more will do also.

As said, don't be a chicken, show us the fact and figures on made in China stuffs are bad. Don't come out some irrelevant reply.

thanks for sharing
the 2.5HP is used in your living room?
the shop quoted me 2.5HP inverter for 3.3k, how much you get yours?
i gonna take 2.5HP R22 type for living room due to short usage duration and the outdoor unit size was more or less the same with 2.0HP

anyway, i presume ME aircon are made in thailand?

2HP with 2 fan (plan to add one more fan later on) should be sufficient i guess
living room aircon will be turned on when having guests come over (5 hours+- max), and maybe 2-4 hours on really hot evening
i plan to use fan only whenever possible
so on average, how much is your monthly bill? and how many units of electric you used on average?

i see, your fridge also ME? or panasonic?
i plan to get a 5-star rated ME fridge as well

i guess my usage would be master bedroom 11PM-6AM daily
another bedroom will be empty, only occupied when my sister is around, or when having guest overnight, should be 8PM-morning occasionally
my living room is connected to dining area and kitchen, so i will install the bigger HP aircon as you recommended or see what the shop's/installer's suggestion on the installation location

i do understand about the 25C+auto setting condition, it's written on most inverter aircon brochure