sorry...
i download the latest firmware 5.07
but how to flash my device Prolink 9300G ?
can anyone teach me?
thx a lot.

new firmware up!

Version: V5.52G (12th of July, 2007)

Prolink 9300G (Billion 7402GL)
http://www.billion.com.au/downloads/FOR_PC...402GLAv552g.zip

New Features:

Improvement:

. Improved logout with web page in order to close the window automatically.
. Added flash checksum for firmware upgrade protection.
. Support SNMP function over loopback interface.


Bug Fixed:

. Fixed the memory leak issue that was caused by DDNS function.
. Fixed the memory leak issue when WAN interface is activated as DHCP client.
. Fixed the memory leak issue when Telnetting to device many times.
. Fixed the memory leak issue when device gets DHCP client request and it will lose 16 bytes per each request.
. Fixed the bug whereby system will be locked when enabling multiple IPSec policies.
. Fixed IPSec IKE bug: Getting wrong policy when 2 or more Road Warrior policies are created.
. Fixed the bug that CPU load will be increased up to 100% when doing remote Telnet/HTTP access.
. Fixed the bug that wireless channel scan can not work on IE 7.
. Fixed slow DNS resolution issue on Linux system.
. Fixed the bug that QoS doesn't work correctly for wireless network.
. Fixed bug that system will crash when disable firewall function from web GUI.
. Fixed bug that FXS port 2 doesn't work if both FXS ports are use the same account.
. Fixed bug that DHCP server will cause memory lost.
. Fixed bug that wireless WPA security can not set correctly by using Mac Safari browser.
. Fixed bug that diagnostic function is not stable.
. Fixed bug that system will jam if get DNS reply with TCP packet.
. Fixed bug that response time of DNS relay function is too slow.
. Fixed bug that traffic can not pass-through if the first packet is from CO to CPE on BiPAC 8501.
. Added watchdog command back.


Known Issues:

-Flash based upgrade will not allow downgrading to version 5.07 and earlier versions, emergency utility is required for downgrading
-Resetting to factory & manually re-entering settings after upgrading is a must for this version.

This post has been edited by yangxi: Jul 12 2007, 06:33 PM

What is the different between 9300G and 6300g?

how about the downloading performance?
does anyone do the compare b4?

New official firmware release...

Please refer to prolink website for latest firmware...

This post has been edited by Ree73: Nov 9 2007, 01:57 PM

hi.. i m using Prolink 9300G for quite some time d.. but nowadays whenever i use Bitcomet programme.. my connection like died..
cannot surf.. but bitcomet is still running..

izzit firmware problem? which version u all recommend ? where can i get it

Try this setting



*I change new LINKSYS WAG200G. (Texas Inst. AR7 @ 210MHz , 16MB ram)

Previously, Bitcomet flood prolink router NAT Sessions (max 1500) , once nat connect max 1500 session, cannot browsing anymore.

This post has been edited by yangxi: Nov 15 2007, 12:08 AM

hhhmmm thanks alot.. but after i update my firmware is much better.

New firmware up!~

Version: V5.53 (29th of January, 2008)


http://www.billion.com.au/downloads/FOR_PC...7402GLv5.53.zip



New Features:
- Added DNS Suffix support, it can be found at DHCP Server setting page

Improvements:
- User can check PSTN voltage without Internet connection established.
- Update wireless AP driver version to 1.1.2.0.
- Corrected some ADSL information on web page.
- Corrected Network Busy/Congestion Tones for Spain.
- Modified DHCP server's reply packets for HOSTNAME option (option 12) behaviour.
- Added the capability to display local SNR Margin and Line Attenuation for 85xx.

Bugs Fixed:
- Fixed the bug whereby wireless WPA/WPA2 connection is not stable with Intel 4965AGN.
- Fixed the bug whereby IPSec won't reconnect with RFC1483 routed mode.
- Fixed the bug when doing diagnostic test, ping to www.google.com will fail sometimes.
- Fixed the bug whereby user will get error message "webserver:error: vim namespace from error: invalid operation" when changing wireless security setting.
- Fixed the bug whereby IPSec Preshared key is deleted when Road Warrior connection is terminated
Page 3 / 16
- Fixed IPSec bug: Not include HASH in 2'nd message of Aggressive mode, if DPD is enabled.
- Fixed the bug whereby DHCP Client cannot get IP address from specify DHCP Server.
- Fixed the bug whereby access from remote site can pass the firewall if no NAT session table or Virtual Server rule matched.

bro how to remove the yellow light from my bitcomet on the bottom right ?

have u done port forward ?

suggest turn off upnp.


When first open bitcomet , router NAT table always load full 1500max. Need wait ~2min to release nat table.

My Prolink 9300G keeps rebooting while I'm surfing internet. Sometimes it reboots 15 mins into startup or 40 mins into startup, then it just keeps rebooting itself again and again. What do you think is happening?

I flashed to the latest Prolink firmware. I did give the Billion firmware a try but the result is the same.

what is your snr margin ? you adsl might not stable .

-try set back Connect Mode to "ADSL"
-Encapsulation mode set to "PPOA"

-after flashing , please set Factory Default Settings

This post has been edited by yangxi: Feb 18 2008, 02:37 PM

SNR Margin Downstream: 30.0 dB
SNR Margin Downstream: 23 dB

Changed Connect Mode to "ADSL"
Changed Encapsulation Mode to "PPoA"

Connection still wouldnt last more than 5 mins. Router keep rebooting itself. It's quite hot tho.

This post has been edited by delon85: Feb 18 2008, 05:11 PM

try disable wireless .
-are you connect BT client ? bitcomet / xunlei

Maybe something wrong circuit board , send RMA .

This post has been edited by yangxi: Feb 18 2008, 08:04 PM

Is there anyway to actually set connection limit and TCP connection timeouts?

Hi,
Was hoping to confirm if any shops are still selling this modem.

According to some ppl, this modem has been discontinued. Any reason why?

Really wanna buy this modem.
Thanks

is this modem better than buffalo one? The firmware better than ddwrt in terms of QoS? Can limit download or upload speed on certain IP?

Prolink 9300g already discontinued ,because oem price quite high from BILLION.

and their new prolink 6300g use TI chipset and less function. Not worth~.

*Prolink 6300g = BiPAC 5102G/5200G (also discontinued long time ago ~ )


RECOMMEND:

-LINKSYS WAG200G
-TPLINK W8920G

hi. will there be problems when i use the billion firmware on the prolink 9300g?

like led lights going haywire or something similar? thanks.

Don't have any problem so far..

This post has been edited by yangxi: Mar 31 2008, 12:29 AM