why no ppl use maha imedion battery?
i have a lot of these from my photography days. 2100mah
not popular?

Smooth bearing is important. But how much more smoother can be that much significant when everything is well tuned altogether.
There are many people who think that free spinning using fingers is enough to measure the car real performance on track when it's not.
I was particularly referring to those who thinks that their bearing is very smooth after dipping in zippo oil and doesn't want to relube them anymore because "see how long this bearing can spin wow!". But then there's the sound of grinding ball bearings inside lol.

For example, when you have wheel bearings, when on the track, the smoothness the wheel can spin is only up to how much the motor drag with all the gears attached together.

It's the same with cars. You can dyno on flywheel and get 200hp. But when you put it on an on-wheel dyno with all the wheels attached and car load, there is probably only like 160hp or so.

Get my point?

This post has been edited by soulfly: Dec 5 2013, 02:08 PM

What is this high pitch torque tuned pro?

now share your motor breaking in technique

I want to break in my light dash pro, but somehow I read somewhere that light dash don't really have any difference before/after breaking in.

This post has been edited by soulfly: Dec 5 2013, 04:47 PM

singer oil is decent

lower the position of the bottom rear rollers.

I'm interested to build Super-II for speed setup.. is it a good choice?

ultra large wheels (tayar sotong) still legal for official races?

tu la kan.
org kat atas cakap bole :

ada jual bateri tak?

This post has been edited by soulfly: Dec 8 2013, 05:45 PM

as long as the sotong part is 8mm diameter and the rest of the rim still covered by tire is still ok right?

szngszng pakar sotong

next year January....




and February...

so the rubber tires actually expands when boiled? all these while i was thinking really really hard on how people stack two tires like that

bearing 850 boleh pakai spacer bearing biasa ke? tengok lubang macam besar je.

kena pakai bearing spacer gold eh? yg mcm included dalam roller bearing 9mm

aahh.... ok.

dapat mahal ke murah?

and i want to ask.... Super Avante Ifrit rare tak? berapa market price kalau ada

This post has been edited by soulfly: Dec 11 2013, 02:06 AM

ah damn it... aku tak jumpa yg complete
dahla warna hitam org tu jual mahal tapi yg merah/biru murah kuning tak ada

aku nak cari yg murah2... buat investment

depends on the chassis i guess
some chassis can have more bearings for shaft supports than others

for ma chassis, the most you can get is bearings on all 4 wheels and 2 counter gears only.

I soaked my ball bearings for 3 days and the zippo liq starting to look murky already.

Will finish this with some Singer oil

not spinning long is not important because you're spinning it using your fingers. free spinning doesn't matter if you put your car on the track.
if you don't put singer oil, there will be some friction towards the ball bearing, which in certain amount of time, will eventually kill your bearing.

don't follow all those videos showing off their free spinning rollers, because if you listen properly, their bearings are making noise (which is not good)

some people think it's good, but i don't.

This post has been edited by soulfly: Dec 13 2013, 11:22 AM