Most of the time MA chassis only needs minimal dampers... for example on simple semi-speed tracks.
Hence the reason of those thinner dampers, I guess.

Thanks for the information.

For my case, I'm using MA chassis festa Jaune. Had problem when after jump then landing. Off the track. Now wonder do I need to sacrifice the cowl to install damper on front. Tonight will try to install FRP brake set.

did your car overshoot? or was it a clumsy landing?

got it from mutual friend.
chip chip price.

below rm200 or below rm100

below 150.
lel.

before this, i missed the ship by 10sec.
supposedly to get it from my supplier for rm80 /set that time.
haish ;( so sedey. then i go get it from my friend lor.
haha

This post has been edited by iOnine: Mar 26 2014, 02:04 PM

The jumping section was far from me. Judging its a bad landing when speed picks up. First two lap it's safe. Once it goes for the 3rd lap when the motor goes to its top speed. That's when shit happens. Jump and landed and tipping off the track. My car weight is considerable heavy. Wonder do I need to go any heavier.

amboi cakap pasal taya senyap tros. puitt~

Any one can share besides Banzai Hobby, Hobby Search, Hobby Link Japan & ebay.com... there is other web can buy tamiya parts & cars from japan?

sharing is caring & loving...

you will need a grippy brake

in many circumstances good braking will save you some weights
lighter setup = easy for the battery

This post has been edited by soulfly: Mar 26 2014, 04:23 PM

V14 OI! fasta pasta

lagi 10

FRP reinforcing plate brake DIY should able to solve the problem?

I already PMed asyraf. Still pending his reply.

My car also has similar problem with u, jimmylim85. My car did not landed properly, not overshoot. I suspect the braking is not good enough. Any other thought guys? My damper is very minimal. I only use the basic tune damper. (2 pemberat at front)



Chasis super 2. Roller 6. (front 11mm ball bearing, rear 13mm guided ball bearing)

For my case, MA chassis stock braking system ain't good and most players says it's preferred for speed. But I'm trying to prove that wrong.

same problem with ar chassis using stock brake included with ar basic tune

tend to not land properly after hitting jumps at top speed, the car swerve abit mid-air and the rear plastic roller got stuck on the walls

need to rebalance the weight distribution, for now just changed to frp brakes to slow it down before jump

off topic: cepat2 la V14

if the rear rollers get stuck , adding one frp to the bottom will help prevent it ...

changed the stock brakes to frp, positioned just below the rear rollers

just close enough to cover the area where the rear roller tends to get stuck

but still didn't test it on track

now have to buy another frp for this brake project... emm hehehe