Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 Car Tint Advice - V2, Raytech, Vkool, Huper Optic, 3M or .....

views
     
mffa
post Aug 27 2014, 11:33 PM

Casual
***
Junior Member
374 posts

Joined: Nov 2008


QUOTE(xLANx @ Aug 27 2014, 10:46 PM)
Guys, I have a situation here.

So I just got my Civic last week and I had Raytech CS85 installed for my car windows.

I did notice some smudges and a few red lines/scratches on the window when I first got it but I didn't say anything because I thought they could be wiped off once the no-whirling-down-windows period is over. So today after a week, I went to get my car washed and once I got back home, I tried to clear off the smudges.

To my disappointment, however, they won't go off! I didn't pay RM2300 for such a sloppy work! Do you think I can go and complain to the vendor about this? I'm worried they're just going to say they were not responsible and those smudges might have been caused by me.

What do you think I should do?

By the way, this Raytech vendor is located in Melaka.
*
as a customer,,u should go back to the shop and make a complaint to them..I also tint my car at Raytech Melaka branch..but it was 2 years ago and the service they give is really good..totally satisfied with the workmanship.but that is 2 years ago..now,I do not know the workmanship quality..please update here because I consider to retint my car there..if service sucks,maybe will opt for other brand instead.
mffa
post Sep 6 2014, 11:13 PM

Casual
***
Junior Member
374 posts

Joined: Nov 2008


[quote=Sylph818,Sep 6 2014, 09:38 PM]
hi all, need some advice here.
i got the quote from ecotint for my new city

Package 1 - RM2200
Front windscreen : RB 01
VLT 63%
VLR 9%
UVR 99%
IRR 95%
TSER 60%
(i know it is non jpj compliant but when i see the tinted paper, it is hardly to differentiate VLT 63 with VLT 70)
4 side windows : RB SC A6
VLT 58%
VLR 9%
UVR 99.5%
IRR 97%
TSER 64%
6 mil
rear windscreen : RB SC
VLT 58%
VLR 9%
UVR 99%
IRR 97%
TSER 64%

Package 2 - RM1800
Front windscreen : RB 01
VLT 63%
VLR 9%
UVR 99%
IRR 95%
TSER 60%
(i know it is non jpj compliant but when i see the tinted paper, it is hardly to differentiate VLT 63 with VLT 70)
4 side windows : RB E6
VLT 63%
VLR 9%
UVR 99%
IRR 95%
TSER 60%
6 mil
rear windscreen : RB 01
VLT 63%
VLR 9%
UVR 99%
IRR 95%
TSER 60%
does it worth to add RM400 to take package 1 which is only slightly different?

hard to answer whether worth it or not to pay additional rm400,,but for me not much difference between this two model..honda city in my house use eco tint ray-barrier non security for all windows..63% VLT but not dark and have pass through a lot of jpj and police roadblock..my house city have 95% IRR and TSER 60%..really cold,,no heat at all..

mffa
post Sep 7 2014, 12:59 AM

Casual
***
Junior Member
374 posts

Joined: Nov 2008


QUOTE(Sylph818 @ Sep 7 2014, 12:05 AM)
ecotint is one of the reputable brand and is an autorized tinted by Toyota currently (before that Merc but now no more)
they hv outlets in most of the state in Malaysia
after survey the tinted paper and owner review, i deciced go for ecotint
*
U cant go wrong by choose ecotint..have use raybarrier for 2 years and work like day 1..ho is good because ceramic film..but from the spec,feels not convincing enough..
mffa
post Sep 18 2014, 09:48 PM

Casual
***
Junior Member
374 posts

Joined: Nov 2008


QUOTE(peri peri @ Sep 15 2014, 12:23 PM)
saw groupon offering less than rm250 for all window. F+R window 2 mill thick and  4 sides is 8 mill thick, claimed made from US, all are security sun tint. reliable for not?
*
for sure not reliable brother..very good security tint must be at least 2000..
mffa
post Dec 26 2017, 06:19 PM

Casual
***
Junior Member
374 posts

Joined: Nov 2008


QUOTE(ry8128 @ Dec 25 2017, 02:56 AM)
I had my car tinted for 1 year already, using Raytech highest spec (Centurion RX + Ultra 70). So far for me the performance are not good enough. I still feel the car is very very hot if park for long time under the sun (not much different compare to my other car which just tint for 1.2k).

Anyone facing this issue? Or is there any way to check is my film really is ori raytech, or if it is ori, how do i know is rx and u70? And yes, I did my tinting in authorized raytech dealer.
*
Nothing much u can do. Even if u try other manufacturer, the result will be the same. I got experience and jumping from one tint to another and fyi, any high end tint cannot prevent cabin interior become hot if u PARKING UNDER SUN FOR LONG LONG TIME. If tint manufacture claim it, then it is bullshit. I had try it and I know.

Impossible for car to keep become cool under sun exposure for long time since sun will still penetrate and accumulate over time.

Differences between ur high end tint with rm1.2 tint is, how fast interior cabin become cool. Dunno u realize this or not. Fyi, My car that use top range become cool, very very quickly as compared to middle range tint I use b4.

Based on ur description, No way ur tint is fake if it been install at raytech authorized dealer.

 

Change to:
| Lo-Fi Version
0.1549sec    0.61    7 queries    GZIP Disabled
Time is now: 11th December 2025 - 03:38 AM