Raytech Ultra 70 with 98% IR rejection...
mean Smart tag cant use??

those raytech spec is proven 1 or cincai write only??

Many tinted over claim their IRR, so far tested raytech seems to be more reasonable around 5 to 10% differences, others mark up like 30% I don't want mention their name =.="

Did my tinting recently with Raytech. Happy with the result!

My tint on rear windscreen, next day after tinting noticed got a bubble about 1.5cm long and 1mm wide. Will it go away after a while, or should I send back ask the installer "push" it out?

hello guys.need some advice here

Need help for Honda Civic 2017 tinting options:-
1) JPJ Compliance
2) Security Tint for side windows
3) Able to use GPS and Smart tag
4) Budget around 1-2k

SA suggests to me to use raytech FX which costs me around rm1410 after discount, because of the 7 years warranty

Honda authorized Window Tint which is Ecotint RB4 costs me around rm1500 with 5 years warranty ( light green )

anyone have experience with raytech before here? i dont want tinted which is colourless, btw raytech comes with light blue colour bt i have not seen it .

thanks so much for your feedback

Bro. Saw your other page on raytech. So you issue 2d barcode now?
Which of your film  can pass JPJ, Puspakom?

Ok. I'm still waiting for it to launch. Else if install now no barcode right, sure need to test with film and glass then sure fail by puspakom.

with this code does that mean puspakom n jpj sure no issue

Anyone kind enough to list out tint brand that we should AVOID AT ALL COST? Other than pasar malam brand

How much extra per car will be charged due to MS2669?

Thanks. i'll take a look in the garage section.. but personally, what would u recommend bro? i've read too many bad feedbacks from bloggers and fb users who got scam from tint shop (incl raytech pusat bandar puchong)..

i was wondering, most car tint focus on side window, example i buy mid to high end tint. yes side window TSER % is high, but then front windscreen still standard that come with the tinting package, i mean whatz the point. front window still feel hot @.@

Yes, this fall under wear n tear.  I believe all tint film heat rejection will drop after 2 years. Only high quality film maybe drop 5~20%% , low quality film maybe drop 80~90 % .

For those car always park under sunlight, performance will drop faster then those car park indoor.

if there is a slight small chip in my front windshield screen, can i still able to tint my screen?

If no QR sticker, will it fail if I install Raytech on my car ah? How to make sure it is legal compliant?

Hi, i just worried if im do the Raytech tinted now, then the new policy request us to change & the existing one cant pass their requirement?

please advise, tq

Hope the Raytech and/or V-Cool rep here can answer my query...

Under the new JPJ 2018 rules, min. VLT still at 70 front/50 front sides/30 rear sides and rear?

Under your product line-up, what's the darkest tint that can pass the new ruling and can get the barcode sticker?

Please advise

Add: 1 thing I find funny, my previous car tinted by Llumar, they actually tinted my whole car with VLT 50 tints...which basically means my front windscreen tint cannot pass JPJ/Puspakom, yet they gave my JPJ warranty on my invoice

I won't recommend Raytech. Already on the highest range Rx still feel the burns.

should have just stick to my good old huper

Boss, what is the purpose of the BTU meter testing after installing the tint?

Add another layer of darker tint need to add $?

Ceramic 60 for front, Ceramic 40 for driver& passenger, Ceramic 30 for all back

The suggestion above are not JPJ friendly nor compliant but very cooling and comfortable to block sun ray in the hot afternoon. No burns at all in the afternoon sun.

I did a review of HO after 7 years+ of usage. Deteriorates after 5 years but still better than other brand i used.

I have not used any security series from HO as installer say they kinda suck in heat rejection compared to normal HO. Maybe some rich forummer would like to try and review.