17mm? hmm, i'll try to measure the o-ring size when i dissemble my loop.

I thought all G1/4 O rings are standard. Just get those specially made for fittings.

hmmm just wondering right, those O-rings inside the c47/48 fittings can be replaced? o_o or only those comes with barbs/compression can be replaced?

It's possible if you know the size. For acrylic tubing it's either 12mm OD or 1/2 OD depending on the brand.
In your case, it's 12mm.

Ohhh~~~ I see, then I am more relieved then. I thought if the o-ring somehow *touchwood* broke or damaged, means the fittings is literally useless and need buy new one =="

Ohh yaa I also need thoughts on this.
Anyone have idea on how to cut those small parts on the side?



Reason Why I need to cut it cuz I wanna put it facing the side. Then at the 2 front G1/4 Thread use 90degree turn to connect to pump and res.
But for the fittings I measured is about 1cm, then the tubings coming out from there onwards is roughly 2cm. So I need to make space for 3cm.

Bad drawings, but kinda show what I wanna achieve.

hello there. hm, to me, i think it would be better if the pump is below the res. because you can't leave the pump dry. when filling up the loop, the coolant still can't reach the pump with that situation. so, if you put the res below the pump would be good for not letting the pump dry.

Anyone experience in painting radiators? Can someone guide me though? Wanna paint my radiator

if u lucky like joel said.

Bro AX Series is modular. Easier to mod and paint. Normal Rads are a whole different story.

Agrees with u~ That's why I say if he's lucky lol XD
Orelse, the one I know so far is taping all the radiator fins with masking tape or other tape and then spray the exterior.
Its gonna be a headache haha

Here's my noob setup after migrating from Lian-Li PC-7HX to Corsair Obisidian 750D









Any suggestion to improve my set-up is highly appreciated

That looks great! Maybe you should use the blue ring on those SP120s.

this seems quite nice

Anyone here knows where to get Dead Water?

Not the Giant supermarket or 7/11 variety. Lab grade ones. Just want to know.

This post has been edited by Sentinel92: Apr 9 2014, 04:23 AM

That is a nice and clean setup bro

Thanks! I'll try swap the rings. See how it goes

Haha..Thanks. Its just a simple set-up. I tried my best to make it as neat as possible

Nice, would be better if add another radiator at front intake.

atlast.. some pictures of watercooling rig... MOAR please

not sure why but its kinda too thick for my liking xD