cable?? u mean solder izzit?
what to do? i also bleeding..
damn, they said tax is applied in electronics too.. we cant do anything

lao... christmas eve. some cable made for santa.


final work. all using canare (F-10, F-15, L-2T2S, LV-61S) and of course, WBT 4% AG solder. 1st try and not bad, just they have some excessive flux when melted.


as usual, a pair of RCA-RCA with marking for unidirectional purposes


a pair of 1/4 MONO-RCA for EMU1212M


close up for mono-rca, Canare F-15


coax cable with 75ohm digital cable

that's all, merry christmas guys~

p/s: santa, i seriously need a good camera. an DSLR will do, please

This post has been edited by yeahs4.1: Dec 24 2007, 07:27 PM

lol, it's you that get HD650. i didn't say anything about HD650

btw, welcome to head-fi and sorry for your wallet?

are you using coax cable for rca-rca? the pictures are quite confusing though

i mean, i know it's RCA terminated at one side, but not the other side. it may be mono-rca, or mini-rca. and of course it's darn obvious that it's coax cable. lol!

never own or use Sonic gear before, my bad

post some pictures will greatly help

by the way, there are 2 possibilities in your case:
1. the connection points are disconnected/loose. resolder will solve your problem. you might opt for recable to improve the quality.
2. your driver is burnt, even recable cant save your cans.

hmm.. IINM, i've never see any 4S11 at pasar road.. but if you wanna get them at pasar road, the only distributor is IC Electronics, which carries genuine product of Canare. so, no worries mate..

by the way, you should head there and ask if they can order for you since you want in large quantity

use F-10 la.. then look for 75ohm coaxial cable by canare too. the model is Canare LV-61S
i've just made one for mikelanding

anyway, i'm going to pasar road soon. going to make cables some friends. so, anyone want to hop into the cables list since i see quite a lot people looking for DIY cables these days? PM me then

thanks,

AND WHERE IS THE PICTURES???????????????!!!

first attempt of braiding cables, with SPC for a friend. you know who you are. LOL~

here comes the RCA-RCA that cost the most (for me, at least) and requires a lot of my patience/work. hopefully they'll sound good as the price tag.

finally, the long awaited SPC and Switchcraft Right Angle plug..
CHECK OUT THE BLING BLING!!!







This post has been edited by yeahs4.1: Jan 21 2008, 06:00 PM

woot, sexy looking Neutrik Pro-fi in techflex!!

i think they're WBT, with 9mm diameter cable. mind to share?

lol, the tax is a ripped off

Has been a while since i posted in audiophile section.. but here comes:




just some balanced XLR cables that i made for my system.
Neutrik XLR male/female plugs, Canare Starquad, double techflex wrap, 4% silver solder, unidirectional ground configuration.
Benchmark DAC - Adam A5x