Outline ·
[ Standard ] ·
Linear+
[wta] failed to overclock haswell, overclocking haswell
|
TSmod_po
|
Oct 23 2013, 09:56 PM, updated 13y ago
|
|
i know maybe this topic will b little bit out, but still it is technical support rite?
my spec i7 4770k msi z87-g41 xigmatek tauro 700w CM seidon 120v
the rig keep crashing if i overclock it more than 4.2ghz can someone teach me the correct method to overclock with this cheap mobo? have someone tried overclock with this specs? want to push up to 4.5ghz if possible.
is there 3rd party software that can be used in windows?
|
|
|
|
|
|
mikicun
|
Oct 23 2013, 10:01 PM
|
|
whats ur ram model/spec?
this mobo supports OC Genie... y not use it and oc from there..?
|
|
|
|
|
|
YearOne
|
Oct 23 2013, 10:25 PM
|
|
QUOTE(mod_po @ Oct 23 2013, 09:56 PM) i know maybe this topic will b little bit out, but still it is technical support rite? my spec i7 4770k msi z87-g41 xigmatek tauro 700w CM seidon 120v the rig keep crashing if i overclock it more than 4.2ghz can someone teach me the correct method to overclock with this cheap mobo? have someone tried overclock with this specs? want to push up to 4.5ghz if possible. is there 3rd party software that can be used in windows? Crash because of ram speed maybe?
|
|
|
|
|
|
meons
|
Oct 23 2013, 10:40 PM
|
|
QUOTE(mod_po @ Oct 23 2013, 09:56 PM) i know maybe this topic will b little bit out, but still it is technical support rite? my spec i7 4770k msi z87-g41 xigmatek tauro 700w CM seidon 120v the rig keep crashing if i overclock it more than 4.2ghz can someone teach me the correct method to overclock with this cheap mobo? have someone tried overclock with this specs? want to push up to 4.5ghz if possible. is there 3rd party software that can be used in windows? https://forum.lowyat.net/topic/2833263baca post dlam nie
|
|
|
|
|
|
TSmod_po
|
Oct 23 2013, 10:43 PM
|
|
using kingston hyper x blu 1600mhz single 8gb
anyway the oc genie seems to tune my cpu only to fixed 4ghz myb i am new to overclocking, myb there is somehow i can modify the speed through oc genie?
|
|
|
|
|
|
TSmod_po
|
Oct 23 2013, 10:44 PM
|
|
QUOTE(meons @ Oct 23 2013, 10:40 PM) too long, cant focus which part should i read though
|
|
|
|
|
|
h@ksam
|
Oct 23 2013, 10:54 PM
|
|
|
|
|
|
|
|
meons
|
Oct 23 2013, 11:17 PM
|
|
QUOTE(mod_po @ Oct 23 2013, 10:44 PM) too long, cant focus which part should i read though 1st start with using stock volt... find max multiplier you can get like 44 mybe then pump little bit jus volt .. check.. it can runing smooth . @ fail... if fail pump more volt. ingore about ram 1st .. focus on cpu 1st...
|
|
|
|
|
|
TSmod_po
|
Oct 24 2013, 07:48 PM
|
|
QUOTE(meons @ Oct 23 2013, 11:17 PM) 1st start with using stock volt... find max multiplier you can get like 44 mybe then pump little bit jus volt .. check.. it can runing smooth . @ fail... if fail pump more volt. ingore about ram 1st .. focus on cpu 1st... currently running at 4.4ghz on 1.299v voltage This post has been edited by mod_po: Oct 24 2013, 07:48 PM
|
|
|
|
|
|
meons
|
Oct 24 2013, 07:51 PM
|
|
QUOTE(mod_po @ Oct 24 2013, 07:48 PM) currently running at 4.4ghz on 1.299v voltage Open RealTemp Execute Task Manager > Performance tab Launch Prime95 Choose custom, min FFT 128k, mem to use (see task manager for available mem) Start stressing Monitor the max temp make sure it doesn't exceed 100C (TJmax) - speed will go down (throttled) if TJmax is hit to protect the CPU from overheating Stress it for 3 hours + Don't stop priming & open CPU-Z Take screenshot including Prime95 + CPU-Z + Task Manager + RealTemp tgk system stabil or not
|
|
|
|
|
|
TSmod_po
|
Oct 26 2013, 09:13 PM
|
|
my mobo seems to limit the voltage only to 1.300v how can i increase that in uefi?
|
|
|
|
|
|
XeMoAsLaM91
|
Nov 16 2013, 03:39 PM
|
|
do u have the steps? i wan learn too
|
|
|
|
|
|
TSmod_po
|
Nov 16 2013, 04:36 PM
|
|
QUOTE(XeMoAsLaM91 @ Nov 16 2013, 03:39 PM) do u have the steps? i wan learn too just jump to bios click on OC tab adjust the multiplier to 43 ring ratio 35 then adjust the VCCIN to 1.9v cpu voltage to 1.25v make it adaptive DRAM to 1.65v (not sure this is neccessary) that was my setup on msi-z87 g41 with seidon 120v This post has been edited by mod_po: Nov 16 2013, 04:37 PM
|
|
|
|
|
|
XeMoAsLaM91
|
Nov 16 2013, 04:40 PM
|
|
QUOTE(mod_po @ Nov 16 2013, 04:36 PM) just jump to bios click on OC tab adjust the multiplier to 43 ring ratio 35 then adjust the VCCIN to 1.9v cpu voltage to 1.25v make it adaptive DRAM to 1.65v (not sure this is neccessary) that was my setup on msi-z87 g41 with seidon 120v what u did this oc the mobo rite?
|
|
|
|
|
|
TSmod_po
|
Nov 16 2013, 05:09 PM
|
|
QUOTE(XeMoAsLaM91 @ Nov 16 2013, 04:40 PM) what u did this oc the mobo rite? no, not the mobo. ive being oc the proc and the ram thru mobo bios
|
|
|
|
|
|
XeMoAsLaM91
|
Nov 16 2013, 08:40 PM
|
|
QUOTE(mod_po @ Nov 16 2013, 05:09 PM) no, not the mobo. ive being oc the proc and the ram thru mobo bios isit complicated?
|
|
|
|
|
|
TSmod_po
|
Nov 16 2013, 08:49 PM
|
|
QUOTE(XeMoAsLaM91 @ Nov 16 2013, 08:40 PM) nooooo, simple like abc  cendawan goreng je do u have the same setup?
|
|
|
|
|
|
XeMoAsLaM91
|
Nov 17 2013, 02:29 AM
|
|
QUOTE(mod_po @ Nov 16 2013, 08:49 PM) nooooo, simple like abc  cendawan goreng je do u have the same setup? my mobo is z77-g43 xD
|
|
|
|
|
|
TSmod_po
|
Nov 17 2013, 02:36 AM
|
|
QUOTE(XeMoAsLaM91 @ Nov 17 2013, 02:29 AM) hmm different mobo chipset g43 and socket too. not sure bout it. basic overclocking should b the same. other features is the extra This post has been edited by mod_po: Nov 17 2013, 02:37 AM
|
|
|
|
|
|
XeMoAsLaM91
|
Nov 17 2013, 02:37 AM
|
|
QUOTE(mod_po @ Nov 17 2013, 02:36 AM) hmm different mobo chipset g43 and socket too. not sure bout it Ya mine is a micro atx mobo
|
|
|
|
|