Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 [wta] failed to overclock haswell, overclocking haswell

views
     
meons
post Oct 23 2013, 10:40 PM

noobies
*******
Senior Member
3,489 posts

Joined: Jul 2008
From: BUTTERWORTH pulau pinang



QUOTE(mod_po @ Oct 23 2013, 09:56 PM)
i know maybe this topic will b little bit out, but still it is technical support rite?

my spec
i7 4770k
msi z87-g41
xigmatek tauro 700w
CM seidon 120v

the rig keep crashing if i overclock it more than 4.2ghz
can someone teach me the correct method to overclock with this cheap mobo?
have someone tried overclock with this specs?
want to push up to 4.5ghz if possible.

is there 3rd party software that can be used in windows?
*
https://forum.lowyat.net/topic/2833263

baca post dlam nie laugh.gif
meons
post Oct 23 2013, 11:17 PM

noobies
*******
Senior Member
3,489 posts

Joined: Jul 2008
From: BUTTERWORTH pulau pinang



QUOTE(mod_po @ Oct 23 2013, 10:44 PM)
too long, cant focus which part should i read though
*
sweat.gif

1st start with using stock volt... find max multiplier you can get like 44 mybe

then pump little bit jus volt .. check.. it can runing smooth . @ fail... if fail pump more volt.

ingore about ram 1st .. focus on cpu 1st...
meons
post Oct 24 2013, 07:51 PM

noobies
*******
Senior Member
3,489 posts

Joined: Jul 2008
From: BUTTERWORTH pulau pinang



QUOTE(mod_po @ Oct 24 2013, 07:48 PM)
currently running at 4.4ghz on 1.299v voltage
*
Open RealTemp
Execute Task Manager > Performance tab
Launch Prime95
Choose custom, min FFT 128k, mem to use (see task manager for available mem)
Start stressing
Monitor the max temp make sure it doesn't exceed 100C (TJmax) - speed will go down (throttled) if TJmax is hit to protect the CPU from overheating
Stress it for 3 hours +
Don't stop priming & open CPU-Z
Take screenshot including Prime95 + CPU-Z + Task Manager + RealTemp

tgk system stabil or not


 

Change to:
| Lo-Fi Version
0.0147sec    1.21    6 queries    GZIP Disabled
Time is now: 2nd December 2025 - 12:13 PM