How can i access the setting page for Huawei HG8240w?

Brand: Huawei
Model: ONU-HUAWEI-HG8240w
Telco: TM Unifi

Terminal IP: 192.168.100.1
Computer IP: 192.168.100.20

I can ping the router IP 192.168.100.1, but i can't access the WebUI page at http://192.168.100.1
I also tried telnet at port 23, ssh to port 22. None of it success.
I tried with LAN port 1 and LAN port 2, same result.

Thanks!


Attached thumbnail(s)

I having the same issue, anyone got any clue on this?

no gui available. TM access this ONU via element management system (EMS).

is there any app or anyway to log into it? really would like to log in to set for the voip setup... maxis fiber

Access by huawei software u2000, very technical. Not for normal user.

Yes it can still be accessible. If you are not connected.

Reset the BTU, disconnected the fiber cable from your BTU

Can I have the details step?

the prob is just how to set it back haha

hi all, a quick question does this modem support 1000Mbps?

yes

I was bought a Huawei Echolife HG8240 but ended up failed to set up the modem. I can't access to my Alcatel Lucent I-240G-T too, it has locked and must reset the BTU in order to telnet into it.
I was gave up because I don't know what is the ONU password of my BTU. Will lost everything if I reset it.





This post has been edited by junclj: Nov 27 2018, 12:51 AM

Ah..thanks dude.. so I don't need to get TM to replace this Huawei modem for me after Turbo upgrade 300Mpbs..

Bro, what WiFi router are you using? I got the Turbo upgrade too but my WiFi speed is limited to my router which is maximum 30 Mbps.

It is better for you to tell what router you are using and test on what device (mobile phone ? Notebook ? etc)
easy for others to help you...the capped limit might not be your router , mighy be your device.

I'm still using the TM provided stock router D-link 850L bro (Supports up to 300Mbps). Will be getting the Tenda AC18 soon though.

You can check out thread https://forum.lowyat.net/topic/4658096 meant for Wifi router matter and see if your router supports Gigabit speeds.

Thanks.

I'm using stock Dlink DSL-2640T provided by TM which I know that the LAN port is 100 Mbps and WiFi 54 Mbps. So this is my limitation.

BTU is Huawei HG8240w which I have tested the LAN port to 1 gbps but I cannot access the web access at 192.168.100.1 but I can ping it. Any help here?

I got the 300 Mbps upgrade and just want to test the speed to confirm it.

Thanks.

we cannot access the btu one

HG8240 is 1 Gbps LAN, no issue ; and you not suppose to access this modem (BTU), yes, some ppl has the knowledge to access it but all setting will be gone and not worth to alter anything of it.

2nd, you know your router is limited to 100Mbps and yet you want it to reach speed of 300 Mbps ???
3rd, I am not sure ADSL suitable for Unifi or not ; and Unifi normally using VDSL.

This post has been edited by jpong1: Jan 17 2019, 03:01 PM

Can, I can access mine.

Model : HG8240H
IP : 192.168.100.1