Yes it can still be accessible. If you are not connected.
Reset the BTU, disconnected the fiber cable from your BTU
Huawei HG8240w settings, How to access HG8240w setting page?
|
|
 Jul 14 2017, 11:30 PM
Return to original view | IPv6 | Post
#1
|
 
Junior Member
272 posts Joined: Jan 2010  
|
|
Quote|
|
Oct 18 2022, 05:03 PM
Return to original view | Post
#2
|
|
Junior Member
272 posts Joined: Jan 2010
|
QUOTE(peter_ng @ Oct 7 2013, 03:35 PM) How can i access the setting page for Huawei HG8240w? SSH is accessible by plugging in to Port 2. Set LAN IP to 192.168.100.10. Then SSH into 192.168.100.1. username: root pass: adminBrand: Huawei Model: ONU-HUAWEI-HG8240w Telco: TM Unifi Terminal IP: 192.168.100.1 Computer IP: 192.168.100.20 I can ping the router IP 192.168.100.1, but i can't access the WebUI page at http://192.168.100.1 I also tried telnet at port 23, ssh to port 22. None of it success. I tried with LAN port 1 and LAN port 2, same result. Thanks!  |
|
|
Aug 20 2025, 09:35 AM
Return to original view | Post
#3
|
|
Junior Member
272 posts Joined: Jan 2010
|
Hi guys, just a quick note here
It seems that TM already found out about this, where I still can access via SSH and view the settings especially the SIP information and do voice mg shutdown so that calls will go straight to my FreePBX instead of the ONU. - FYI, the SIP information keeps changing especially the media IP address and the default gateway for voice vlan. As of 18 August 2025, they seems have pushed new configuration where , access is now locked including http, https, ssh and etc. I suspect they also changed the LAN interface IP where it is no longer in 192.168.100.0/24 network. I tried 192.168.2.0/24 and 192.168.1.0/24 is also not working as well. [For TM provided ONU] |
| Change to: |  0.0168sec
 0.99
 7 queries
 GZIP Disabled
Time is now: 10th December 2025 - 05:15 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.