Found the guide liao...

Hi Bro Eric...

Yup, me got my OEM ABL Module years ago when my Gaga still new that time...
And yup, it's like Bro ruby1288 posted...
That module is PnP ie uplug cable 2Alarm & plug in2 ABL socket; plug in plug fr ABL in2Alarm socket.
Only 1 cable need 2tap in2 power cable 2rear brake lamp...
That's it!

Mine is in a solid plastic box whereas the module yu show above is a PCB in shrink wrap only but same install...can see the lone cable 2tap in2 rear brake line.
Mine is however also more expensive... 

Yr choice, Bro...

i tot male brain is like RAM. u r tarp pandan isit? 

RAM = random access memory
memory padam when shut-off

So sorry , Bro...
Din mean like Bro Iska posted...

Yup, yr HDD still w/o errors...more like that! 

ps. Mayb more like EPROMS? 

How you check the bars in the doors and seat belt pretensioner?    have to dismantle door and B-pillar to check those things.

But if don't have the V-bar in the boot behind the rear seats and the 3-point rear middle seat belt, then likely it's pre-SV model.
xyah.
My FLX SE also ade, but you nvr notice even though you saw my car more times than you saw ruby's

I haz a sadding 
DIY TB PnP also  titanrev

so wrong.

sh@rty 5 dah reply me.

Cheaper for me to get from mudah

62 je... vs 88

downhill exit car park la deng.
ayam not ah beng.

 
brake pads good quality like lemburg or trestor also less than rm100~
imagine new GB rm3k++
but for FLX GB i think even more expensive 

itu stoopid woof woof mia.
downhill exit la.
dah cakap cheapjing, cheapjing la. tarak paham ka. apa la lu mau. 

About the WS spraying water one. Get a friend to press the spray function for you with the ignition on but engine off. Listen if there's a small whining sound from the driver side front tire area (near the fog light). There's where your water spray motor is at. If no sound means motor not running (maybe socket loose or motor rosak or spray function fuse blown) If got sound but no water come out or water spray out very weak use a paper clip or needle to poke at the hole sometimes it is stuck at the nozzle there.
I use N let it roll by itself.

Ular Racing Lower Side Bars! Corner like GTR!!*

*Sideskirt required

Damn you, always tease me.

No la. I changed from "damn" to "hey", now it sounds friendlier.

To confirm about what I need to do:
1) Call SA and ask about the car manu date?
I think "JPJ Car Card" (Certificate) got write ?

2) Go SC to see if can get back the features of the post SV Exec CVT?
Call IdontCareLine and try your luck.
If cannot, go SC. 1 cannot, try 2nd.
If all else fails, call / go COE and rage them why 2013 car no this n that.
What you missing edi ah ?


3) Poke the nozzle
4) Check WS water
5) Refill with what? Clear Water?
If you ask until like that, means you din check the bottle got water or not before.
Do No #4 first.
If empty, put clean water and try got water spray out or not.
if got, means assembly tyme the ah beng no help u put water.

if put dy, still no water then do like what TitanRev advised.
clean water is enough. I don use water with shampoo coz my WS edi coated with Rainaway.
normal water is fine.

No need to be so polite to funker. Hantam saja.

no skirt too obscene

bottle looks like this

needs around 5L

better take to Proton do.... need to change CVT Filter as well (RM 235.25)