Whoa
Hyper Hybrid Gouf 1/60 was selling at MYR 350.00

That is dirt cheap, right

Hi,

U can refer to below picture which i have highlighted in red which i believe is the issue as this component can only move left right but cannot move up or down at all.please help. thanks



This post has been edited by squall_12: Oct 3 2013, 10:05 AM

up/down as in, kicking motion towards the front? left and right i assume is towards the side skirts, like a side kick? if it's the up/down motion, u might want to check the crotch/waist piece, the problem should be there and not on that piece
if it's outwards towards the side skirts, then u may want to disassemble that piece, check properly the direction and reassemble it, it may be because you have that piece assembled the other way round

up/down no problem the problem is left and right that move towards the side skirts which that part that i highlighted cannot move at all and i did build correctly so i don't know what wrong.

This post has been edited by squall_12: Oct 3 2013, 10:14 AM

then it might just be tight, if you're absolutely sure you've built it correctly, maybe sanding down the peg will help loosen the joint and allow for the movement

try swapping that joint left leg to right leg, see what happens.. u might build correctly but u put in the wrong way..

This post has been edited by immpulse: Oct 3 2013, 10:26 AM

any of u is in penang island can help me check? as this is my first time build 2.0 mg gundam kit.

Thanks

you might be use the wrong orientation of parts J4,
there's a " marking showing it should be on right side...
might be you oriented the part wrongly,

or J4 should be on right leg, not left leg...

1. Both side of the hip joints are using the same J3 and J4 piece, so it doesn't matter.
2. Most probably the pieces are just too tight so you might have to loosen it a bit.

Best way to loosen up (and not break anything in between) is to detach the entire leg from the crotch, take out the hip joint (J3 and J4), and try moving J4 outward when holding J3. There's no locking mechanism between the 2 pieces.

Welcome another addition to the family

Huh...MG minion?

I wished
but as you can see, it is just as excited as I am

ok let me try out this method thanks all.

mana RG GP01s?

This post has been edited by HxiiiK: Oct 3 2013, 01:55 PM

For Astray Red Frame lover...

Was looking for this for long time. Finally found it today. And thought of sharing with you guys.

Download here.

papercraft?

Still queuing
probably will be postponed until I clear a few backlogs first...

wow so many in the pipeline

how much is the expected price for Wing Proto Zero here? i'm thinking around 170-180 and i saw PO for 160, i wonder if i should jump at that price

A gundam feature article in today's THE STAR newspaper.

btw I seldom read newspaper.