priorities bro.

the stuff i listed out already cost over 20k, though still under 30... even if i want ASC... it'll be some time before i can even fork out the money.

my settings tak sama ma... -.-

hmm....

Try jo only says .. its a safety feature ..

many after try will .. wat the...

ok la see how lol (i'm mainly interested on the shifter though )

Ok...d reply bac to u is really ridiculous...

Hello every1 . Need some suggestion on a car i'm getting for my brother. Currently thinking of saga sv . this model got ABS? I heard many saga has starting problem? How
can a new car be hard to start up?

Among proton which model is really value and less problematic? i dont think i wanna get over 50k car for my brother

davidke20

i tot so too.
just dun think it should spoil together.
both rear left and right.
if one side only I will personally think I fall into a really bad pothole that the car tyre is so tahan did not explode or pancit but the wheel bearing so tak tahan.
maybe fall into pothole then kong one side then impact too high transfer to the another side so both side kong together? hahaha~~

When will you arrive? Anyway, may call you to confirm again regarding cheap mooncake

SV - Sohigh Value - Meaning quite kosong, besides of 2 airbag, there's no other safety feature and minimal accessories. You need an Executive version to have the ABS. Still below 50k. Among Plotong, the latest model called "NEW CAR" usually has less plobrem. Normally buying 2nd hand car will have to prepare for unforeseen circumstances.

Hard to start is overflow issue, any electronic fuel injection car can have it. Just because it's a fucking Plotong, hence it automatically become a huge thing and being wide spread across. It's an isolated case, and just need to keep cranking until it start, have nothing wrong at all. The REAL plobrem with GaGa is always fuel consumption issue. Due to less efficient and huge Plotong Kampro engine, the long stroke was note meant efficient for sprint. Hence town driving will cost slightly more petrol utilization compare to other cars. However, long distance can be great advantage due to the nature of inertia.

Start twisting your fingers again, how many cars in the market is running below 50k, yet have 2 airbag + ABS with huge trunk to put 56 durians? If you don't really care about all that, may be you'll just have to top up a little bit more, then you can own an ever sofa king ***** magnet MYBI

Metal fatigue Take a closer look, the crack begun from the HOLE

1) Off engine & jack up the rear part of the car, put stand on both side
2) Release handbrake. If manual, engage 1st gear/R grear. If auto, slot to Parking brake.
3) Use your hand to roll the wheel, listen to it whether got grinding sound. If yes, it could be the bearing itself? Or it could be the brake is jammed.
4) To confirm whether its bearing problem, whilst spinning the wheel of fortune, hold another hand on the shock absorber. If it's a confirmed bearing knock out, you'll feel juddering on the absorber.

So, if you have a jammed brake cylinder for both side, then I welcome you to GaGa world. It happens all the time

If you have both broken bearing at the same time, chances are the grease Plotong put in can't stand heat. As and when you driving too hot, suddenly met a puddle, the heat expansion crack your bearings at the same time wash away all the grease

Good luck, no need to call me and ask. Just send to magician and fix it soonest possiblem

Hi & Good Morning, Everyone!!

Nice weather 2wake up2...
No rain but still cool...

Me happy cos DIY y'day went well...

Juz 1 more main service item 2deal with...
Replacing Brake Fluid.

However, need 2find & buy suitable tubing (aquarium tubing?) first...old one oledi hardened...
Then it's a matter of getting these ole hands "itchy" agin!!
Haha!

zeone, like ur DIY service under pondok rumah work! bila mau buka service center...

Not like u want to go there service also.

This post has been edited by Fubar20: Sep 12 2013, 08:31 AM

unfortunately zeone is very far up north if not if in KL, i tink business

yea...i wont go to Kedah just to service my car of course...unless i travel up there then already reached service mileage then service there only travel back KL lo...

then some Saga kaki can be his employees...

get another person to help you on brake fluid as you need to do proper bleeding.

oh and i just gotten some aquarium tubing too, 50cents 1 meter XD
gonna spray high temperature paint on it, looks better and maybe can prolong its life... and yes mine already hardened + darkened... slipped off the spray nozzle that other day and i was wondering wtf happened to my windscreen water sprayer... turns out the water all spraying inside the engine bay as the tube came off

it's only 50cnts / meter and you want to paint it to prolong its life ?
I'll get a new one. Its not like you need to change the fluid every week / month ?

I might go Tualang on Sunday with my parents and relatives for seafood also

Tipu mia fan-made trailer.

I tot usually first things first remap dulu

So i conclude that saga has poor fuel consumption .right?
A long stroke in engine means to provide more torque .So i dont get what u mean so i assume its underpower?
Overflow issue known to my world is the infamous rx7 rotary . didnt know how can a saga overflow . Seriously never heard of other fuel injection car like this, of coz , the newer ones..

Actually i thought of this saga sv because other saga itself is quite kosong . those skirtings rim and all can just buy outside . Will seriously consider if it has abs and edb with its 2 front airbog at 33k why not.

So i hope can hear what kind of problem will saga provide with