No point upgrading when you don't have space
Waste only if you get 20'' monitor

i plan to upgrade my pc but i have limited space. any recomendation?

my curent pc spec is viewsonic va1931wa VGA connector

info : http://www1.viewsonic.com/products/desktop...va1931waled.htm

any news on XL2420TE??

Hi ,

The BenQ XL 2420TE is labeled as XL 2420T in Malaysia. The current batch of XL 2420T is an upgrade of the previous batch with 144Hz refresh rate now.

To make sure you are getting the upgraded version, following are the simple details you should be paying attention to :-

i. Manufacturing Date - The manufacturing date of 144Hz XL 2420T will be no earlier than July 2013.

ii. Retailers - All the BenQ products that are available in Lowyat Plaza are the upgraded versions. IF you want to be safe, please recheck the manufacturing date.

Hi ,

The BenQ XL 2420TE is labeled as XL 2420T in Malaysia. The current batch of XL 2420T is an upgrade of the previous batch with 144Hz refresh rate now.

To make sure you are getting the upgraded version, following are the simple details you should be paying attention to :-

i. Manufacturing Date - The manufacturing date of 144Hz XL 2420T will be no earlier than July 2013.

ii. Retailers - All the BenQ products that are available in Lowyat Plaza are the upgraded versions. IF you want to be safe, please recheck the manufacturing date.

thank you so much for the info. how about the XL 2420TX version? what r the differences between T and TX?

TX is the model that is equipped with the 3D glass, everything else is the same.

Just like what the others have mentioned, it would be more bang for bucks if you were to switch to a better desk and monitor options would be limitless

ya. sadly my pc area kinda limited. i need to adjust the space b4 i can get new table. haha

hi mr benq.. i wish to know the differences between XL2420T and the XL2411T..

thank you

Hi law1777 and welcome to the forums!

That’s a good question actually and it isn’t something that BenQ makes clear. We have reviewed both the 20T and 11T which allowed us to get a feel for the differences between both the models. This thread will be a great place to draw together the differences.

There are some aesthetic differences which I think can be seen easily enough from pictures and probably don’t need to be described. Some poeple prefer the red accents of the 20T whereas others prefer the simple style and slightly thinner bezels of the 11T.

There are some differences in functionality in that only the XL2420T has the ‘S-Switch’ which makes using the OSD or switching between 3 different ‘custom’ presets very easy. It also has touch sensitive buttons which work quite nicely and are arranged a bit more logically than the pressable buttons on the 11T. Once you’ve set everything up though you don’t necessarily need to worry about the OSD too much.

The XL2420T has a broader selection of ports than the XL2411T. It features a DisplayPort input alongside DVI, VGA, 2 HDMI ports and 3 USB 2.0 ports. The XL2411T on the other hand features a single HDMI port, DVI and VGA. For most users they will just want to connect a PC using DVI and that will handle the monitor very well and isn’t a problem. Some users may find the additional ports helpful, particularly the DisplayPort if they are planning to use an unusual GPU (or gaming laptop perhaps) without DVI.

When it comes to the actual image performance the monitors are quite similar. The 11T seems to have been tweaked a bit, at least compared to the revision of the 20T we reviewed, but is essentially quite comparable when running the same settings. It seemed to give some slightly richer colours when running under ‘Standard mode’ and selecting ‘Gamma 4′ without crushing shades or making colours far too deep as the 20T did.

The monitors are both very responsive but the 11T has a bit of an edge in that department. It actually runs at 144Hz natively, giving a slight edge in fluidity. It also offers ‘High’ and ‘Premium’ AMA (Advanced Motion Acceleration) modes rather than just ‘On’. The ‘High’ setting offers a more comfortable balance than the overly aggressive acceleration on the 20T and less conspicuous overdrive artifacts are produced as a result. Most users don’t seem to mind about these on the 20T anyway, but some do.

Those are really the key differences between the two monitors. It is really the S-Switch, extra ports and touch sensitive controls that add a bit of cost to the 20T (or at least are selling points that would allow BenQ to charge a premium). The 11T is newer though and has been tweaked a bit, particularly with its more flexible grey to grey acceleration options.

TS, still can find BenQ A800 or KX800 Keyboard?If yes which shop selling it?

My Benq monitor lasted 3 years +, very good!

Hi wilson0416,

We are glad to hear that you choosing our monitor. By the way, thanks for support our BenQ product.
Hope you can enjoy the monitor while you play your games and movies.

Best regards,
BenQ Malaysia

Hi mr.benq
Malaysia have ew2740l this model or not ?
I stay at jb , where is ur dealer at jb ?