anyone go Mr. Bright Lighting before? recommended?

9.5feet is considered double volume.
Hence, depending on the lux level want to achieve.

7w might not be enough. It also will affect the lux based on ur fitting spacing.
If you have the previous CFLi, there should state the lumen output. From there, you can get the similar lumen replacement. Don't look at wattage anymore. It's no longer relevant.

Thanks for sharing the info.

Unfortunately, those unknown brand LED DL only indicate the wattage and no info for the lumen output. I have decided to opt for 6" 12w 4000k LED DL with two years warranty from Puchong, hope the DL works fine.

This post has been edited by clickNsnap: Mar 31 2015, 10:14 PM

DL Casing +e27 bulb is so ugly ... Lol

haha... I felt DL casing + e27 not so nice as well and I opted for the 6" 12W 4000k LED DL

Went shopping around Puchong over the weekend to scout for LED downlight and normal DL casing + e27 types.

Most of the shops were selling the China/Taiwan-made LED downlight
(12W) at RM22-RM26 while the local branded ones are ~RM60.

Warranties for LED downlight range between 6 months-2 years.

Opted for LED downlight coz prices for the normal DL casing plus LED bulb still cost ~RM20 at the shops we asked. I want to maximise my ceiling height as it will be very low if install plaster ceiling and the normal DL casing (7inch).

In the end, bought one of the China LED brand from Ten-Gro to let my contractor see first, although only 6months warranty. May consider the Taiwan LED brand (Super Eco) because that one has 2 years warranty - but not sure if quality or not.

May consider going to Wong lighting in Tmn Paramount based on the comments here.

So far, anyone use China/Taiwan LED types without any problem?

using taiwan LED for less than 1month..still couldnt give any feedback yet .so far so good

May I know what brand did you buy? Reading too many threads on LED downlight... so much information to process. Haha.

NSB frm houses lighting puchong ...RM27

i just send tsen lighting , the india can't really talk well..the only chinese dont even bother to talk with me.

their price is higher range as what i see , they sell mainly philip lighting.

i saw few downlight ,round one cost around rm 4x.. if i buy yhe gu10mv led (Rm90) it will cost me total at rm130 .

now my wiring men ask me to fix at least 12 light point and charge me at rm70 per point..the overall ROI for light become RM130+70= RM200 ..for 12 piece will end up like 2400RM...am i crazy hahahah

due to all those wiring ,now i have no choice to put in plaster ceiling for my ground floor..

Did i have other choice then to put downlight if i use plaster celing ?

Dining and living area you can put one pendant light each. But need to do extra support beam for plaster ceiling. This can be complemented by downlight and floor lamp.

I don't like Tsen Lighting. Not helpful and unfriendly.
Expensive is one thing. I prefer buying lights from Wong Lighting, and Lightcraft.

This post has been edited by idoblu: Apr 12 2015, 10:04 AM

May i knw what size that you bought for rm27? 7w or 12w
i bought one 12w nsb for testing purpose as well but rm35

12w

ohhh good pricee . Where did u buy ?

houses lighting at puchong ...

One of the seller told me nsb pure import from china and i see the driver voltage like those from chine one.

and he recommend me yetplus which also make from china but customize for malaysia voltage and the driver also look solid + bigger heatsink .. same price.

my friend recommend GE or better brand , i saw the philip dimlight selling at rm6x..and the nsb and this yetplus also selling at rm49.. should i lift my budget and get a better brand ?

NSB 12w RM49? It's Rm27 at houses lighting ..lol..GE is good , but 10w for RM59 and 15w for 79 is too expensive if u need to buy for 30pcs

your price rm27 was before 1st of april ? I guess now the supplier oledi marked up the cost and also additional of gst 6% . Saw yetplus led too and it looks more solid than nsb .

Now the NSB LED downlight already raised to:
4inch (12W) = RM29
6 inch(18W) = RM35