yeah curious about the vttdram bug. i didnt find any bug. so far running at 0.5xvdimm seems to be perfect.

Working with usb flasback.

Oh bios hmm before i had a way of reducing vccin for 2133 c7 to default 1.75v.
New bios back at the old vccin.

Hence my vote it sux for now

This post has been edited by cstkl1: Jun 14 2013, 05:57 PM

Btw coolice whats the safe range for vccin on 24/7.

Bios 0017 awesome.
Mobo dead n stuck n code 78.
Was just priming 2250c7.
Before that already noticed my g19 was behaving oddly during bootup.
Second bios also cannot boot.

Clear cmos now with no power n waiting 20mins
Shld be ok after this. Odd same timings were ok on 0503.

This post has been edited by cstkl1: Jun 15 2013, 01:44 AM

Still dead. Proceeding with removing cpu.

Update still dead. Was told that my cpu might be dead.

This post has been edited by cstkl1: Jun 15 2013, 08:17 AM

Vccin missing but i still think it was the bios. But hmm owikh taught me something about the recommended loadline, gonna try it

Praying to gods of oc for my new proc not to sux

Took a leap of faith n got a gaygay z87 oc
Praying to gods of oc for gaygay to finally be good.

This post has been edited by cstkl1: Jun 15 2013, 02:07 PM

Nice. 2nd proc after one dead is better than previous on vcore on intial test.

Btw i meant as the board ok as pls dont burn my one of a kind psc dom gt.

This post has been edited by cstkl1: Jun 15 2013, 04:27 PM

Same batch. Just playing with serial.

So far can tell u its all random. Batches dont bother
Just boot n c ure vid. If 1.05v. Not so good
Best are all 0.9xx.

This post has been edited by cstkl1: Jun 15 2013, 05:08 PM

Testing later at nite or tommorow. Trying to get to know my new proc.

not sure ure board can do this but set cpu voltage and cpu cache ring voltage manual.
the rest leave it at offset mode.

this way u get the full c-states.
its pretty awesome watching ure proc at idle at 0.00v. lol

killed any??

no chance to test the gaygay yesterday as the proc i put it kindda sux on voltage/imc everything imaginable. vcore at 1.2v 4.2ghz barely passed.

This post has been edited by cstkl1: Jun 17 2013, 10:37 AM

Theres 4 ways to clock
Fully manual
Adaptive
Offset
SVID

adaptive issue is the vcore can be more than what u set.
So far seems manual on vcore n ring bus with offset on vcssa/cpu io d/a is the best. Fully c-state.

Up ure vcore.
Its something to do with the ivr. But overall u can leave ure vcore at that. Ure good to go. Just recheck with aida from total stress test n games like bf3 n metro last light.
Ppl like owikh , stasio n even me. We need more stability cause of mem clocking. Most of the mem clocking we do are all custom etc n to check those timings right we run stress test. We need to take out vcore as a issue from any instability we face.

Thats amazing

Btw those 3k kits... What are the chipset.

Cause hmm corsair qualify them as vengence pro so guessing its not a binning issue. So cant be that rare.

Btw have u thought of doing like the gamer profile.
5ghz one core etc

Dont worry abt those voltages. Only above 2133 u need to set them and digital i/o is ram dimm population n chip dependent.

Trdrd n twrwr. If set at 4 ure rams will run at out of spec voltage.

also stasio. Haswell a bit different from ivy/sandy. u dont gain much from cpu speed on bandwidth.

but when u tightened the bandwidth ure going to need more vcore.

nah c-state C6,C7. Got it working. Its awesome haswell. The voltages on the cpu cores most of them drop like 0.000V on idle. Lowest i have seen 1.9watts.

stasio its the tRDRD and tRWRW. his rams are stable only this setting.

But normally if he ups it he has to up his vdimm. I suspect the 3k rams being sold will end up the same. Default for 2.4k ram and above all dont run tRDRD at 4.
hence y u see my 2133C7 all 33k. It comes at a cost of vdimm and vcore.

Ure asking whats the benefit. this settings shows difference on aida on multicore bandwidth mem cache test. but on single thread test the 3k still will beat the 2133C7 on bandwidth like maxmemm.

so its a matter of balance on ure voltages .. mem speed etc. So far i think personally a 2666 C10 is the fastest from what i have i seen.

So what i am trying to say his 4.6ghz 2.8k/3kmem prime .. Ure not going to see many ppl are able to do that.

This post has been edited by cstkl1: Jun 18 2013, 10:06 AM

No this is different trd on 775 is more akin to rtl. Trd is a nb issue.

Its been out for a week. Just more bclk presets.

Read one of my reply y owikh does the stress test. He needs a confirm vcore for that 4.6ghz because of all the custom mem clocking.

Why asus rog z87 kindda awesome is because of this.

My setting for 4.5ghz 2133 C7


Later will trying to get the uncore to 1:1 although the recommended is 100-300mhz less than ure cpu speed.

This post has been edited by cstkl1: Jun 20 2013, 10:13 AM