haha. no wonder when i go there they didn't check mine long coz they know theer is such problem already. haha. was there waiting for the lady in charge for around 15 minits or so but used the time to read up newspaper at the lobby and it took me less then half an hour in wisma alphamsatic before i was heading back my house again.

what are the load and idle temp of your processor on this mobo ? just curious coz since i change to biostar my processor temp have been real low idle at 29-33C and load at 45-46C. last time when i was using lanparty it was idle at 33-35 and load at 54-55C

anyone tried installing mbm or knows whter mbm is compatible with this mobo ?

This post has been edited by shadow_dweller: May 16 2006, 04:14 AM

Did u found the the mobo model inside the MBM or not ??

not sure.my reading is same as for the old 1 and new 1. using freezer64 pro idle 38 and load 49 Vcore 1.5v.

btw can we check the chipset temp for this mobo?
how can i noe if the temp is too high?im having a fan blowing in from my side panel dunno whether it is sufficient.


This post has been edited by hng: May 16 2006, 09:43 AM

i'm usoing stock hsf. the fan is getting louder and louder everyday. thinking of getting it change with a good quiet fan. oh yeah i running without my casing side panel too.

My SP2800+ temp
idle 30
full load 38
casing side panel whether open or close still same temp

any new changes in this new batch?? I dunno whether i got tis problem or not.....haihz.......

MEmory stable at 230Mhz. 2.5-4-8-8 1T

KVR really not so nice, many unable above 240

my T6100 have ADSL drop line bug, bore

hmm .. so kvr is not recommended to pair with biostar tforce eh ? last time my ram can hit 280Mhz on 1T. hopefully now can reach 240Mhz

Your BIOS problem settle?

yeah. i've rma it already ma

anyway this new motherboard and bios aint any better in fact it's wrost . prime stable and memtest stable but not dota stable at 2200Mhz 220Mhz 2.5-4-4-10. quite disspointed. not going to push anymroe liao. coz wanna play dota in between study. dun wanna make my teamates angry

guys, anyone here using / know if the Biostar TForce 4 U SC939 worth the money? cos looking for a mobo right now.. kinda interested in this mobo.

haha actually jz now i accidently updated into that bios again and was unable to winflash it to other bios. your solutiono work by downloading gigabyte @bios and used that utility to flash it. thanks man.

personally if you are not looking for matx or on board mobo better go get dfi lapnarty series if money is not a concern. if you are thinking of getting a matx or a mobo with in built gpu then by all means get the biostar tfroce. but performance wise dfi lanparty is better imo. dfi infinity series never tried before though. mayb can ask hng about this

I manage to hit my CAB2E 144@ 2.8Ghz prime for 2 hours plus,haven't try prime it more than that.
Conclusion:
Best bang for bucks.
Clocking cpu well but not memory,maybe my twinmos BH5 is not prefered.Selling off because my SLI-D is on the way.

This post has been edited by kingmaker_20: May 17 2006, 04:14 AM

hmm.. my mobo cannot hit 245htt above la weird. no matter how low i set the multi or lower the ram speed still cannot.

i tried
htt = 250
multi = 8
htt multi = 3
ram = 133

cannot boot la. could it be my mobo limitation?

Maybe the ram leh.... just got my inno3d 7600GST ddr3 version, no more money to get high performance ram...maybe next month i will try to get corsair xms ram...

I think is your CPU,
How high your CPU can be achive in DFI?