oh yeha besides using the gien temp monitoring software .. any other software is compaitble with this mobo ? kinda don;t like the gui of the softwaer given. doesn't look cool or nice.

use mbm la
the best and minimalist and does what it does best

hmm ... will give it a go later ..
hehe ..

Newcastle 3000+ really more difficult for OC
MAy I to know what BIOS version you use?
YOu can OC to 2.5GHz on DFI?
I believe DFI Lan Party is much more better compare with this board
Use 1T if can, 2T will seriously decrease the performance

i'm not very sure what bios i used .. it was the first tic tac modded bios with 4V ddr. not sure what is the exact name already. but with all the bioses that i've tried it gives almost similar oc result. more or less 50Mhz diff only.

I mean the Biostar's BIOS

So do u think that Biostar will release new bios for TFORCE soon ? Actually i cant find any problem for mobo...

Starts from loose timings. IMHO, CL2.5 is a bit "tight" for BT-D43.

my current bios sux big time. tis is the one im using cr51m207.bst

any idea which is the "best" bios. what bios you using ?

i hope they will release a new bios that can configure the idle time for the ram. i can't run 1T at 220Mhz. damn.

now using cas latency 3. but still at 2T. jz finish memtest 100%. will wait awhile before tweaking the setting need to rush assignmetn and persentation first.

You using 2 ram for 754,its more difficult for OC

newest BIOS
http://www.biostar.cn/bios2006/2-1/CR51M330.rar
Additional Setting for RAM

Idle BIOS for OC
http://www1.biostar.cn/BIOS2005/6-9/CR51MA06.RAR
I use this BIOS,but it contains a lot of bug

Swap the BIOS in CMOS,if swap in windows it may be damage ur built in LAN card,because will swap the MAC add togehter.
Becareful if newbies,swap BIOS contains a risk,I will not responsible for any problem occure,good luck.
See you next day

Thanks man....... Will looking for what additional ram setting will be add....

why can't run at 1T ?

i also have difficulty running at 1T. i need help here anyone using any 3rd party vga card on hteir mobo. i think it's not possible to fit any graphic card in the pciex slot as theere is 3 capacitor near the rear of the motherboard which will block the graphic card ( output adapter )

My roomie was using D43 previously. He can go up to DDR480 2.5-4-4-11 1T @ 2.7V only. Well, he was using DFI nF2 Ultra Infinity la, maybe u can give a try on this setting.
btw, the Trc / Trfc = 13/15 if not mistaken.

somehow the nforce 2 platform oces better.
i cant get my rams to be stable even at 217 fsb at 2-3-3-7@1t with 2.85 volts. ( ch-6)
something is quite wrong here. as i usually can do 2-3-3-11 with CPC on ( equivelant to 1t) at 220 fsb

I m still using the onboard vga... still dunno got this problem... Can u show the pic for how is ur graphic card look like...

http://www1.biostar.cn/BIOS2006/2-1/CU51M306.RAR
NEWEST BIOS FOR T6100-939