Ok.. no problem... if cannot i will fit it to another bridge...

oh yea....good idea....southbridge oso quite hot......

Actually.. me already prepare a table fan for it if the northbridge cannot be fit...

Bro...forget to ask u to try 7500 to run 3dmark03, c how much the score... I think 7500 is only a directX 7 card only...

... ur 1 can get 19xx... my 1 only can get 1289 only.. then 3dmark01 can get 4930 only....

I got 1320 only for 03

Me lagi teruk....3Dmark 03 only got 1248......

optimize your RAM setting

See you all busy with change bridge fan,
Have a version of BIOS can effective lower the bridge temparature.
but i haven try

stupidguy is right. haha no offence about your nick nice nick you got. optimize the RAM setting. the 19** score i got by setting 230Mhz 2.5-4-3-8. but play dota half way sometime got problem. suspect it's probably oc too high my gpu. so now it's at 225Mhz 2.5-4-3-8. running without a problem now. i'll bench my current setting and let you guys know what is the result.

Bro... how is the result now ??

I m confuse now.... get a 1 gb x 2 KVR PC400 or buy GSKILL F1-3200BWU2-1GBGH PC3200 (512mb x 2)(From Dinster), which 1 better ??

Use pair of KVR is quite difficult for OC, espeacially for large capacity.
but its cheaper,
Try looking UCCC,corsair VS 1G now got UCCC,try for it

okies.....i oc my proc to 2.0ghz only.....then the ram clock speed at 220mhz 2.5-3-3-7.

I got some questions bout those settings...
1) I use A64 Tweaker to tweak the TRAS, but after i restarted my pc, TRAS went back to 8. In the bios, i totally don't understand......those 14T or .....which should i set?

2) I wanna set my ram's clock speed to 220mhz....but how to set in the bios? I kena set to 220mhz for the FSB baru the ram clock speed can go to 220mhz. How to set the ram speed without need to touch those CPU FSB settings??

Hope you all understand wat im talking bout....

This post has been edited by jon89: May 6 2006, 09:57 AM

TRAS is control by BIOS,once you restart then return to default
How to set the ram speed without need to touch those CPU FSB settings??
Impossible

If looking for additional ram setting you need to flash to new version BIOS

Just passing by to say hello.Just got my Tforce 6100 939 today,welcome me to the club.

Yaya... here come the new member.... !!!
Dun forget to post ur best snapshot OC for TFORCE 6100.....



This post has been edited by nakata101: May 7 2006, 10:06 AM

Abit slow means the fps is jerky lo. In other words, it is considered as lag

see my point. it can't even excel in DX7, how do u expect it to perform in DX8/9? As long as it plays DX7 games smoothly, it's adequate for onboard graphics. Unfortunately, it is not

Another thing, have u guys try running HD content with the onboard graphics? From wat i find, the cpu usage doesnt even get lifted by it. Another letdown.

This post has been edited by redken: May 7 2006, 11:27 AM

some tips on Biostar Tforce6100-939 overclocking.

1. give a good cooling to your NB and SB. passive heatsink definitely not enuff if u want to hit 300++ FSB.

2. the bios is NOT matured yet. i myself cant POST after 290 Mhz. this is done using the 1st bios released by Biostar.

3. some says, switching to 2T, will give xtra Mhz, i dunno. i still stuck at 290Mhz, no matter 1T or 2T.

4. use Clockgen to outleash the power of this mobo. 350 Mhz ++ is simply piece of cake.

5. play with the divider, some RAM like 133Mhz, some like 100Mhz.

6. u are encouraged to play with bios. here's a good page to start.

http://lejabeach.com/Biostar/6100-939/6100939bios.html

7. hang around here, they are very helpful..

http://www.rhcf.com/sisubb/ultimatebb.php/forum/53.html





This post has been edited by dinster: May 7 2006, 12:08 PM

daman!!! my hand itchy again.....

@ dinster:

nice guide.. i dun even noe they exsist till u intro them...uuhhuh

Nice one from din.
Here's another one from [H] forum:
http://www.hardforum.com/showthread.php?t=963584&page=1&pp=20

Let's share and crank up the Tforce

Woww.....nice guide from dinster!!! Thx....

Edited: anyway, im still waiting for ur pic.....Evercool Chipset Cooler....

This post has been edited by jon89: May 7 2006, 01:05 PM