i've got no problems whatsoever with my Biostar Tforce6100-939

using integrated graphic / Chaintech 6800 / XFX 7800GT..

all works flawlessly

some tips on Biostar Tforce6100-939 overclocking.

1. give a good cooling to your NB and SB. passive heatsink definitely not enuff if u want to hit 300++ FSB.

2. the bios is NOT matured yet. i myself cant POST after 290 Mhz. this is done using the 1st bios released by Biostar.

3. some says, switching to 2T, will give xtra Mhz, i dunno. i still stuck at 290Mhz, no matter 1T or 2T.

4. use Clockgen to outleash the power of this mobo. 350 Mhz ++ is simply piece of cake.

5. play with the divider, some RAM like 133Mhz, some like 100Mhz.

6. u are encouraged to play with bios. here's a good page to start.

http://lejabeach.com/Biostar/6100-939/6100939bios.html

7. hang around here, they are very helpful..

http://www.rhcf.com/sisubb/ultimatebb.php/forum/53.html





This post has been edited by dinster: May 7 2006, 12:08 PM

hurm..... my rig.. new stepping.. cheers...

# Biostar Tforce 6100-939
# Air Samsung TCCC 512MB
# Fortron Epsilon 700W

self modded ?

what kind of extra temperature detection ?

currently my Tforce6100-939 only has CPU Temp detection.

just wanna share my experience on onboard LAN.

last time i had a problem with it (driver is invalid, like corrupted, LAN cannot be detected etc) .

now it's gone. onboard LAN working like a charm.

so for those who are still experiencing the LAN problem.

do this.

1. download the latest chipset driver from nvidia.com

in my case, it's nForce_430_410_8.22_winxp2k_english.exe

2. flash the latest bios

in my case, CU51M410RH.zip

hope this helps

looks like i have to sell my DFI NF4-D Lanparty

This post has been edited by dinster: Jun 11 2006, 04:47 PM