Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

> LYN Official Vaping Thread V9, Edisi Awan Nano

views
     
justordinary
post Jun 27 2013, 07:02 PM

Getting Started
**
Junior Member
233 posts

Joined: Aug 2010


QUOTE(ally9970 @ Jun 27 2013, 12:09 PM)
Bro justordinary, what would be your verdict? KTS, K100, DS Mod, Sentinel Clone?
*
KTS, bad built quality, firing button feels cheap when pressed. so will not consider even at rm30

K100, heard from users it fires well but i personally don't like the design.

Sentinel clone, performance wise almost the same with ds mod. if not wrong the body is made of alluminium and brass right? brass do oxidize and makes your hand smells like rust and make your mod look ugly after a while. not sure bout sentinel clone but my friend's poldiac brass body has this problem. and i don't like the design as well.

DS Mod, well built, sturdy and solid quality. feels like you can kill a dog with by just throwing this at it and it doesn't spoil after that. firing is fine. have further upgrade options with copper pins set @Rm70 to reduce dropvoltage even further and hits like a truck. its really value for money i would say. only downside is it's side firing pin. so when doing the genesis tilt will mafan abit need to adjust angle. other than that everything is good here.
justordinary
post Jul 1 2013, 04:18 AM

Getting Started
**
Junior Member
233 posts

Joined: Aug 2010


QUOTE(Ah WanG @ Jun 30 2013, 02:50 AM)
sentinel clone n tvs clone roughly how much wif battery n charger?
*
u sure u wan go sentinel clone ah.. the middle part is brass. and it has knullings on it. brass oxidizes and become darkish brown.so u must rajin polish if not it gets very ugly and dirty. not to mention smells like rust on your hands too.

why not wait abit for the new sentinel m16 clone? definitely looks better than the current one though..

https://fbcdn-sphotos-e-a.akamaihd.net/hpho...390117263_n.jpg

user posted image

it's still prototype now but i believe in 2 months time you can get the clone version already. smile.gif

This post has been edited by justordinary: Jul 1 2013, 04:21 AM
justordinary
post Jul 1 2013, 04:24 AM

Getting Started
**
Junior Member
233 posts

Joined: Aug 2010


QUOTE(quintessential @ Jul 1 2013, 03:47 AM)
lol. guns n roses guitarist blames his near death experience to e-cigarrette
http://www.blabbermouth.net/news.aspx?mode...wsitemID=191812
*
kepala hotak dia. excuse! i vape tak masuk hospitaal pun
justordinary
post Jul 1 2013, 08:42 AM

Getting Started
**
Junior Member
233 posts

Joined: Aug 2010


QUOTE(Ah WanG @ Jul 1 2013, 06:32 AM)
thanks for the headsup n tips notworthy.gif

my fren's ego pv has spoiled so he need to get one replacement soon
i will let him know this info
wanna ask how do ppl polish the brass n how often we need to do that?

the new sentinel m16 clone roughly will be how much? but i dun think he can wait for 2 montsh liao haha
*
Toothpaste / sunlight / lemon with salt works fine. rendam in warm water first. then apply any of these and rub with hand or soft toothbrush if on sentinel cos got those knullings harder to clean. can buy aftermarket brass polish oso. Brass oxidizes quickly. Probably can say in few days exposed to air. But i don't have a sentinel mod so i can't say for sure.

I don't know bout the cost wor probably around Rm150-200? Or your friend can go k100/ds mod/ggts clone? hmm.gif

Or malaysian made VG-T? Rm290.



According to this video it gives lower voltage drop than the almighty chi you. Looks really convincing to me. I think it's really bang for bucks though if it performs like the video shown.

Here's their fb page.

https://www.facebook.com/pages/Vaping-Gadget/134903463338310

This post has been edited by justordinary: Jul 1 2013, 08:44 AM
justordinary
post Jul 1 2013, 09:58 AM

Getting Started
**
Junior Member
233 posts

Joined: Aug 2010


QUOTE(Ah WanG @ Jul 1 2013, 09:17 AM)
ic ic.. kinda agree with u
currently i only have 2 ego, the first i bought sudah rosak so have to get a 2nd one..
then i bought around 4 ce5, then upgrade sikit to protank
if dun count on the mod part, the spending on juice itself i guess it's more expensive for me on spending for analog previously
i was a 2 days a pack smoker, so one week around rm30.60 spent on ciggies
now i vape around 30ml or more per week on protank.. if counting avg rm15 for 10ml, 1 week is about rm45 cry.gif
but then vape got lesser health issue, less or none pollution, no annoying smell and i dun like ciggie smell right now.. i guess i will stay on vape laugh.gif
thanks for the feedback, now kennot watch youtube n fb yet.. go back i will check it out
actually the reason i plan to get mech mod for my fren is kinda erm.. not related to drip or rebuild
my fren's ego spoiled.. so he plan to get a new one.. then he said dun like those ego 1100mah pv cos it's long n hard to keep in pocket
so i intro him mech mod n ppl recommend sentinel clone mod (which the price is around rm30 more than the 1100 mah pv, but after add in batteries n charger will be higher) cos mech mod can put in those 18350 small size battery n provide around 800-1000mah power
n he is not into drip tank, he is using protank only currently like me..
so izzit a erm.. good choice to go for mech mod?
*
it's finee. if u use standard protank coil which is 2.0 - 2.4ohm on mech mod you will give up. the clouds and flavor just doesn't hit.

but protank can recoil to lower ohm. recoil to about 1.2-1.4 ohm should give good vape on mech mod.

my friend also using protank self recoil on mech mod no issues so far pretty good vape. save alot compare to buying coil head once every 2 week as well.

don't worry about recoiling though its pretty easy. takes you only around 10 minute for washing dissambling recoiling and reassemble the tank.

just get 2.0/2.5mm wicks 5metres @Rm15 and kanthal 30/32awg 5metres @Rm10. The wicks and kanthal can last you half a year - 1 year for protank if you recoil once every 2 weeks. thumbup.gif

This post has been edited by justordinary: Jul 1 2013, 10:01 AM
justordinary
post Jul 1 2013, 10:36 AM

Getting Started
**
Junior Member
233 posts

Joined: Aug 2010


QUOTE(Ah WanG @ Jul 1 2013, 10:07 AM)
ouch.. me n him is on 2.0-2.4ohm all these time on ego with around 3.7v, the ego can give 3.4v 3.7v n 4.2v but most of the time we are on 3.7v
and i tot mech mod will give power start with 4.2v (minus the voltage loss, around 3.8v maybe?) n slowly decrease until 3.4v like that
so i tot should be ok for me to use mech mod on protank
guess i am wrong now

i tried a rebuild 1.7ohm coil on protank b4, it heats up very fast, the top of the pv bcome very hot very fast
and drains battery fast too, need to recharge 2 3 times per day for 1100mah ego pv

my protank coil normally last me a week, ur fren's 2 week is much more better than mine dy biggrin.gif

yeah ytd i bought 30awg kanthal and 2.5mm wicks, wanna learn rebuild protank coil soon
bought 1 meter each n each cost me rm5, expensive liao sad.gif
*
normal ma the heat if on low ohm. but depends on you guys la. cos me and my friends prefer low ohm warm vapes. get better taste of the liquid. but if you guys prefer 1.8ohm then go with it lo. different people different. cos you vape on kinda low v also. i used to vape 4.2-4.4v on 2.0ohm clearomizers. should be fine if you guys vape at low v. personal preference afterall. biggrin.gif

2,000mAh batteries on mech mod with 0.8ohm genesis setup can last me about half a day or more then it feels weak already. but anyway, can buy few batteries ma. my daily usage is x1 800mAh 18350 battery and x1 2000mAh 18600 battery @0.8ohm and 3ml 12mg a day vape.

if you use 2,000mAh 18650 on 1.5ohm and above should last you whole day. hmm.gif

This post has been edited by justordinary: Jul 1 2013, 10:48 AM
justordinary
post Jul 1 2013, 10:53 AM

Getting Started
**
Junior Member
233 posts

Joined: Aug 2010


QUOTE(Ah WanG @ Jul 1 2013, 10:52 AM)
shocking.gif wow.. so high battery usage kah
mine erm.. 1100 mAh ego can last me a day from morning till night.. b4 sleep i charge, wake up continue vape
*
now i vaping on 0.8 ohm marr. last time on 2.0ohm my ego last time 1100mAh oso can last me whole day till night icon_idea.gif
justordinary
post Jul 1 2013, 01:41 PM

Getting Started
**
Junior Member
233 posts

Joined: Aug 2010


QUOTE(Ah WanG @ Jul 1 2013, 10:55 AM)
are you using dripper tank?
wanna ask for drip tank, how often do we need to rebuild/recoil
*
i using genesis tank.

for my drip tank, about 2-3 days i'll recoil once. even 1 day using you start getting gunk on the coil and weird smell even if you torch it and dry burn it. once you add liquid the wick turns yellowish black again. 2nd day onwards don't taste fresh to me already.

genesis i recoil about 3 weeks once. it doesn't taste like it need recoil though just that i changes juice often so i wanna disassemble the tank and wash so have to recoil it since my aga t2 doesn't allow you to tear down the tank without removing the coils.
justordinary
post Jul 1 2013, 01:45 PM

Getting Started
**
Junior Member
233 posts

Joined: Aug 2010


QUOTE(celicaizpower @ Jul 1 2013, 11:05 AM)
used, sold. Still prefer my Pisces T as ngam ho with my tekak smile.gif
*
Any verdicts on the VG-T? How it performs? Cause i seen some videos of the VGT voltage drop test looks convincing though.

0.15dv on boge 510 cartomizer @ 1.5ohm.

0.07dv on boge 510 cartomizer @ 2.0ohm.

thats pretty amazing though.
justordinary
post Jul 2 2013, 05:24 PM

Getting Started
**
Junior Member
233 posts

Joined: Aug 2010


QUOTE(Ah WanG @ Jul 2 2013, 12:59 PM)
sometimes i really wanna facepalm n laf at those article
april fool pun sudah lepas dah lagi mao post article like tat

http://www.newsbiscuit.com/2013/06/29/mp-w...-from-internet/
*
i wish i can torrent liquids over the internet.
justordinary
post Jul 3 2013, 01:09 AM

Getting Started
**
Junior Member
233 posts

Joined: Aug 2010


QUOTE(braindeath @ Jul 3 2013, 12:27 AM)
thanks man, i tried my friends ego edi, and i know what to be expected

i wanna try to stop smoking, hopefully it wont be a hobby, to mod and buying stuff etc....
40 stick per day is heavy edi sweat.gif  im not even a box per day but i feel the effect edi cause i was active in sports before

they wanna ban cause of the tax thingy, cost for making cig only like 20cent per stick, and they're selling rm10 per pack, it is obvious

as advice wanna try cheaper version 1st

tq for your opinion bro notworthy.gif  notworthy.gif
*
brace yourself. it will be a hobby. it's just not worth it to get ego anymore considering the price. ego USED to be a beginner thing but that was history.

that was when you don't have much choices because there are very little options in the market and they cost 200-300.

nowadays, you have alot of choices. and prices too, are dropping. so i recommend you to get something else than ego.

For example; ego c twist with no led panel and functions cost Rm95 + charger cable Rm13 + wall adapter Rm10 = Rm118.

Vamo with led panel, checking ohm ability, battery level check ability, short circuit function cost Rm105 for full set body/batt/charger. (used to cost Rm230+ before)

or joyetech evic full set Rm130. (used to cost Rm300+ before)

why go ego when you get something better at cheaper price? and ego has definitely no resale value. buy those for rm118. i doubt u can resell for rm50.

all the used to be expensive and higher end mods has dropped price to this very affordable range. so they are better alternative to beginner set.

This post has been edited by justordinary: Jul 3 2013, 01:11 AM
justordinary
post Jul 3 2013, 01:23 AM

Getting Started
**
Junior Member
233 posts

Joined: Aug 2010


QUOTE(braindeath @ Jul 3 2013, 01:16 AM)
noob q here: what for do we need led panel, ohm & batt check ability and short circuit function ?

seriously im noob at this sweat.gif  blush.gif
*
ego twist allows you to adjusts voltage from 3.2ohm to 4.8ohm only right?

vamo allows you to do that too, up to 6v. you can check through the led panel to know if your battery needs charging already or is it still vapeable.

ohm check function is for when you rebuild your own coils and wicks. like you decided to buy a rebuildable tank, like AGA T / RSST. then you will have to build your own coils. the ohm function lets u know what ohm your atty is at. and it can check some errors in prebuilt coils too.

like my personal experience, bought vivi nova coil head 1.8ohm. loooong time ago when i started vaping. it feels very weak when i vape it on 3.8v because i always use 3.8v on 1.8ohm resistance. checked it on my friend's vv mod. found out it was actually whooping 3.2ohm.

and i myself too bought a ego twist laast time because vamo that time was Rm230 above. now i'm into rebuildable attys, i don't have any pv to check my ohm and have to get a multimeter instead.

short circuit protection is for when you get a rebuildable atty, after rebuilding the coils you might make a mistake somewhere and it might get short circuited thus might cause your battery to blow. vv mods will auto cut off and will not let you fire that atty. it also shows on the LED panel that your atty has short circuit.

This post has been edited by justordinary: Jul 3 2013, 01:26 AM

3 Pages < 1 2 3
Bump Topic Topic ClosedOptions New Topic
 

Change to:
| Lo-Fi Version
0.0365sec    0.54    7 queries    GZIP Disabled
Time is now: 3rd December 2025 - 09:13 PM