Whats the best tank i can get for Rm50+-? No RDA. I have mini nova and iclear30.

Wanna change. So whats the best bang for bucks or the hot tank that most people are using at this price range?

already have

where to buy? cobra and agi is genesis style tank? use wick / mesh one?

liqua original subang jaya got anyone selling??

look for Royale Brew in facebook. they do have copper pins +ve -ve and firing for DS Mod.

Check here, https://www.facebook.com/vaper.stuff

As for flavoring get from baking shop. Those flavoring are usually PG/VG based. check properly first to make sure cause some flavoring is oil based and you should not use oil based flavorings.

yes everyone uses baking flavors.

Not sure but it doesn't say vegetable glycerin? Why not go safe side and get from reputable resellers

try adjusting the flavoring %? And the PG/VG ratio. People say PG enhances the flavor but for myself, i find that VG actually makes my juice taste better. Too much of PG makes the juice becomes so artificially flavored like toilet perfumes. While on the other side, VG enhances the density of vapor and increase sweetness. I have a sweet tooth for liquid and not artificial smells so higher VG content goes well for me.

And also did you steep your liquid after the mixing process? Try steeping it a week. If i doesn't turn out good then you should make a new batch.

One day you will find the 'right' flavor for you through trial and errors.

Wah 40% lol. Too much lehh. Look around in ECF, there's a compilation of what brand flavoring and flavors is at best at what % according to user votings.

What ohm do you want to achieve?

harmful when inhaled.

you fire ngan mod apa? kalau pakai variable voltage letak voltage paling rendah dulu. siap setting hotspot baru pakai volt yg ko suka.

kalau mechmod jgn pakai battery yg fully charge dulu. pakai battery yg 50%. lepas siap setting hotspot baru pakai yg fully charge

This post has been edited by justordinary: May 28 2013, 04:50 PM

depends on the color of flavoring you are using? of course you can add coloring from those baking ingredients but about the safety issue i'm not sure.

but what i would advise is the more things you put in a liquid the more harmful it might be so better keep it simple pg/vg/water/flavor

i also looking for this. raw mint. if you wanna know premixed one try mister-e ice series. the menthol damn good. like ice lemon,taste like cold raw lemonade on the throat without the mentos/polo sweet taste.

Where you guys buy 28awg A-1 kanthal from?

And where you guys buy ribbon kanthal 0.8 x 0.1 from?

Can't find anyone selling it

linguini tu apa. ribbon kanthal? brpe awg.

VV mod = Variable voltage mod where you can adjust the voltage and it has built in electric circuits.

Mech mod = Non variable voltage that fires at 3.7v constant with no built in electric circuits to avoid short and etc. Basicly just pieces of metals.

Differences are, VV mod can fire tanks at 2.0ohm, 2.4ohm finely but mechanical can't get the full oomph because it only fires at 3.7v. But mechanical mods can fire resistance lower than 1.2ohm. Which means you can rebuild a 0.8ohm coil and fire it with mech mod but not vv mod because vv mod will not allow you to fire anything below 1.2ohms.

Pros of using lower ohm are, warmer vape, stronger taste, faster reaction time. No need to wait awhile for the coil to heat up can just vape away straight.

Anyone seen this multimeter before? Where can i buy them and what's the price?

Yes fully charged batteries stores up to 4.2v. But when you fires it at a mech mod, the voltage released is 3.7v. When it gets below 3.7v left in the battery, it forces the voltage to go up to 3.7v thats why people recommend not to use your battery below 3.6v.

vv mods uses a kick in the electric circuit and it can't fire anything below 1.2ohms. If you like to vape at high ohm then by all means go vv mod. If you prefer low ohms then go mech mod.

god so expensive must as well buy a vv mod to check ohm liao.

i came across one of the batteries thread in ECF that explains how it works and loads more information. try digging there. good knowledge but i lost the link so can't put refer link here.

multimeter cannot leh i bought 1 Rm20 from diy shop. very innacurate and the meter keep jumping. i just touch the +ve pin to -ve pin it show 0.1 resistance 0.6 resistance 1.20 resistance 22.0 resistance.

exactly same like mine leh. check voltage no prob very precise. but ohm got prob

diy shops sell below Rm20 saja got a few brand to choose from

if you starter i recommend go vv mod first. after you understand and learnt more only venture into mechanical mod if you're interested.

vv mod you can vape any tank you buy off the market. mech mod also can but can't adjust voltage so most tanks that comes in pretty standard 2.0ohm doesn't taste good on mech.

What size is that?